greg2895 Posted November 21, 2017 Share Posted November 21, 2017 I rebooted my server and now I have no network access at all. Not sure what my options are as I have no gui access. Attached is what ifconfig spits out. Quote Link to comment
bonienl Posted November 21, 2017 Share Posted November 21, 2017 Try to access your server by http://192.168.1.12 Quote Link to comment
s_mason16 Posted November 21, 2017 Share Posted November 21, 2017 I recently had the same issue, it was a phone or something that isn't always on the network took the ip address that my unraid server has statically assigned to it. Hope it's something simple like this for you. Quote Link to comment
greg2895 Posted November 21, 2017 Author Share Posted November 21, 2017 No go. I dont think I have any communication to unraid. If I run ping tests to local machines or websites they all fail from the console. Quote Link to comment
ken-ji Posted November 21, 2017 Share Posted November 21, 2017 Disconnect unRAID by pulling out the lan cable first. Then try to ping the unRAID IP. That'll quickly let you know if anything else is using unRAID IP. Quote Link to comment
greg2895 Posted November 21, 2017 Author Share Posted November 21, 2017 12 minutes ago, ken-ji said: Disconnect unRAID by pulling out the lan cable first. Then try to ping the unRAID IP. That'll quickly let you know if anything else is using unRAID IP. Nothing else comes up on the ping with the server unplugged. Quote Link to comment
unevent Posted November 22, 2017 Share Posted November 22, 2017 Did you change anything before you rebooted? Why did you reboot? Have you had jumbo frames enabled long? Any change to any other part of your network? Quote Link to comment
greg2895 Posted November 22, 2017 Author Share Posted November 22, 2017 Turned out to be an issue with my network switch. Quick reboot of the switch fixed the issue. Uggh... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.