Moved build to new system, drives not seen by unRAID in WebUI


Recommended Posts

Basically the controller is not responding:

 

Nov 18 13:59:52 server kernel: mpt3sas 0000:42:00.0: Refused to change power state, currently in D3
Nov 18 13:59:52 server kernel: mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (32813424 kB)
Nov 18 13:59:52 server kernel: mpt2sas_cm0: sending diag reset !!
Nov 18 13:59:52 server kernel: mpt2sas_cm0: diag reset: FAILED
Nov 18 13:59:52 server kernel: mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:8937/_scsih_probe()!

 

Different slot and/or a board bios update it's probably your best chance, some bios settings may also make a difference.

Link to comment

Thanks a million for looking through the logs!

 

That's irritating. 

I'll give it a go in another machine to see what happens. 

Though I think it might be a board issue. Tried a flashed H310 as well, and had similar issues.

 

I don't suppose you've any idea what settings I should be changing? Not familiar with more technical settings on AMD boards.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.