-Daedalus Posted November 18, 2017 Share Posted November 18, 2017 Hi all, Moved my build to an X399 system. Drives connected to the board show up fine, drives connected to the 9211-8i (P19 IT) aren't being detected in the WebUI. Card was previously working fine. Tried different slots, same thing. Anyone care to have a look through diags to see if any light can be shed on this? server-diagnostics-20171118-1402.zip Quote Link to comment
JorgeB Posted November 18, 2017 Share Posted November 18, 2017 Basically the controller is not responding: Nov 18 13:59:52 server kernel: mpt3sas 0000:42:00.0: Refused to change power state, currently in D3 Nov 18 13:59:52 server kernel: mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (32813424 kB) Nov 18 13:59:52 server kernel: mpt2sas_cm0: sending diag reset !! Nov 18 13:59:52 server kernel: mpt2sas_cm0: diag reset: FAILED Nov 18 13:59:52 server kernel: mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:8937/_scsih_probe()! Different slot and/or a board bios update it's probably your best chance, some bios settings may also make a difference. Quote Link to comment
-Daedalus Posted November 18, 2017 Author Share Posted November 18, 2017 Thanks a million for looking through the logs! That's irritating. I'll give it a go in another machine to see what happens. Though I think it might be a board issue. Tried a flashed H310 as well, and had similar issues. I don't suppose you've any idea what settings I should be changing? Not familiar with more technical settings on AMD boards. Quote Link to comment
JorgeB Posted November 18, 2017 Share Posted November 18, 2017 8 minutes ago, -Daedalus said: I don't suppose you've any idea what settings I should be changing? Not familiar with more technical settings on AMD boards. Not really, but you can try with anything related to PCIe settings. Quote Link to comment
-Daedalus Posted November 18, 2017 Author Share Posted November 18, 2017 (edited) Interestingly, all drives are detected on 6.3.5. @limetech Any ideas if anything changed in unRAID or the Linux kernel that might explain this? I can't imagine support for whatever isn't working in this card was dropped. Perhaps something in supporting Ryzen simply exposed this? server-diagnostics-20171118-1501.zip Edited November 18, 2017 by -Daedalus Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.