jang430 Posted October 30, 2017 Share Posted October 30, 2017 SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 395 3 Spin_Up_Time 0x0027 187 181 021 Pre-fail Always - 5608 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1002 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 13077 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 50 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 23 193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 4702 194 Temperature_Celsius 0x0022 111 091 000 Old_age Always - 39 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged WDC_WD30EFRX-68EUZN0_WD-WCC4N6FLNHT9-20171030-0911.txt Quote Link to comment
JorgeB Posted October 30, 2017 Share Posted October 30, 2017 Looks OK, it would be better if Raw_Read_Error_Rate was 0 because in WD drives these can indicate the start of more serious issues, but for now it's fine. Quote Link to comment
jang430 Posted October 30, 2017 Author Share Posted October 30, 2017 Looks OK, it would be better if Raw_Read_Error_Rate was 0 because in WD drives these can indicate the start of more serious issues, but for now it's fine.So what do you think? Do I need to get it replaced? Will the raw read error rate reset? Sent from my SM-G900F using Tapatalk Quote Link to comment
JorgeB Posted October 30, 2017 Share Posted October 30, 2017 Unless you're having problems not yet, but you may need to replace it sooner than later. Quote Link to comment
jang430 Posted October 30, 2017 Author Share Posted October 30, 2017 Unless you're having problems not yet, but you may need to replace it sooner than later.Thank you johnnie.blackSent from my SM-G900F using Tapatalk Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.