Some help after power failure


Recommended Posts

Hi Everyone,

Have been running unRaid now for over 10 years, I have my first problem.

After a 4hr house power supply failure 1 of my 2x 40Tb towers is not running. Boots properly

I can see it get to Tower Login. But I am not able to access over ip to start the array. Can not reach this address is the message.

 

I am running 5.1 on this Tower. Running 5.0 on the working Tower2

I do see an error message on the screen, which I have attached.

 

Appreciate any help or advice on how to fix as I have never had to get under the hood ever before..

 

Much appreciated

Steve

unRaid problem.JPG

Link to comment

Call trace after call trace.  Unfortunately, I don't know what they're relating to.

 

You could try copying the bzimage and bzroot files from the working flash to the one thats giving you problems and try again.

 

Barring that, I would try another flash drive, set it up as 6.3.5 trial and see if that boots up.

Link to comment
Just now, HK-Steve said:

If I go to v6, does the converting to XPS mean data is lost in the conversion?

 

No, only if you do it wrong, also you don't need to convert immediately, maybe ever, just that some users experience stability issues with reiser on v6, besides it's and old and in some cases slow file system, xfs is recommended.

Link to comment

OK, Have some time today, let`s see if we can get back online..

 

I will do the upgrade, so the question is what do I do next?

Do the disk numbers need to match the original numbering and parity disk?

 

I read through the startup guide, but it is a new system, not a recovered system.

 

Appreciate your help 

Link to comment
  • 4 weeks later...

Hi Guy's,

Wanted to drop in to let you know all is back up and running. No data loss which is a huge relief.

Much appreciated your help and patience.

 

I do have one last question as I can not navigate to the individual disks. I can get to the Share folder and see the combined data of all the disks.

In settings I looked at everything. Enable disk shares is set to auto, Enable user shares is set to Yes, Included disks is set to All.

 

After changing my IP address, I did not turn the Docker back ON or the VM Manager. Do I need to??

 

Tower1 shares.JPG

Link to comment

So just to be clear..I read through the thread, but a lot went straight over my head. 9_9

 

I currently copy to a specific disk, then my media is played from the share folder.

Should I be copying to the share folder and play from the share folder??

 

Plex is my Software that I use to playback all my movies and TV shows.

I do have the option to play directly from each disk, just needs to be set in Plex.

 

Which is the best option??

 

Much appreciated

 

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.