mrbilky Posted September 3, 2017 Share Posted September 3, 2017 I'm pulling 30 watts from the wall when drives are spun down and around 42-50 watts running hows this stack up too everyone else? Quote Link to comment
1812 Posted September 3, 2017 Share Posted September 3, 2017 300ish at idle running 4 vm's with GPU's, pfense firewall, 90 something gigabytes of ram, 2 processors with 40 threads, some dockers, and a partridge in a pear tree. My 4k video editor with 4 processors with 80 threads, gpu, 80ish gb of ram, idles in the 550's, max power at 1000+ watts. I win. (You were going for highest consumption, right?) Quote Link to comment
mrbilky Posted September 3, 2017 Author Share Posted September 3, 2017 59 minutes ago, 1812 said: 300ish at idle running 4 vm's with GPU's, pfense firewall, 90 something gigabytes of ram, 2 processors with 40 threads, some dockers, and a partridge in a pear tree. My 4k video editor with 4 processors with 80 threads, gpu, 80ish gb of ram, idles in the 550's, max power at 1000+ watts. I win. (You were going for highest consumption, right?) HaHa that's more than my power supply is rated at! No need to tell the kids to turn the lights out when their done Quote Link to comment
HellDiverUK Posted September 3, 2017 Share Posted September 3, 2017 Around 25W idle with no disks running, about 50W with all 4 drives running or when transcoding with Plex (the i5 is super-low power). I could shave a few watts off if I had a different PSU, but I'm running a Corsair RM750 which is the wrong PSU for a low power machine. Quote Link to comment
1812 Posted September 3, 2017 Share Posted September 3, 2017 57 minutes ago, mrbilky said: HaHa that's more than my power supply is rated at! No need to tell the kids to turn the lights out when their done It is a bit. But if I were to have separate computers for everything, it would end up 3-4x more in power consumption.So I don't complain. The first server runs dual 1000 watt power supplies. The second one which is hungrier, runs 3 of the same but is only on when used. Quote Link to comment
mrbilky Posted September 3, 2017 Author Share Posted September 3, 2017 1 hour ago, HellDiverUK said: Around 25W idle with no disks running, about 50W with all 4 drives running or when transcoding with Plex (the i5 is super-low power). I could shave a few watts off if I had a different PSU, but I'm running a Corsair RM750 which is the wrong PSU for a low power machine. Nice yeah I'm running an i7 6700 locked cpu in a prebuilt so looks like mine is pretty frugal on the wattage! Quote Link to comment
Diode663 Posted September 10, 2017 Share Posted September 10, 2017 I have a Dell R710 running two 2.53 4 core xeons, 32gig ram, 1 cache drive and two WD reds. Idles around 110 watts and the highest i have seen it hit was 160 with some vms working. Quote Link to comment
s_mason16 Posted September 13, 2017 Share Posted September 13, 2017 Im doing something wrong then. I JUST built my unraid server off ebay and I'm pulling 209 W at idle. I know most of it is my psu. but i didn't think that much. PSU is a 1200W rosewill quark platinum rating, its the only psu i had with dual eps connectors, i bought a y-cable but it wasn't long enough to reach both. 2x x5650s Tyan s7012 mainboard 6x sticks of ram lots of fans 1 ssd 5 hdds a mellanox 10gb card Quote Link to comment
uldise Posted September 13, 2017 Share Posted September 13, 2017 17 minutes ago, s_mason16 said: Im doing something wrong then. I JUST built my unraid server off ebay and I'm pulling 209 W at idle. I know most of it is my psu. but i didn't think that much. PSU is a 1200W rosewill quark platinum rating, its the only psu i had with dual eps connectors, i bought a y-cable but it wasn't long enough to reach both. 2x x5650s Tyan s7012 mainboard 6x sticks of ram lots of fans 1 ssd 5 hdds a mellanox 10gb card my previous server board with dual x5680 and 2ssd, 10hdd, mellanox too, was about 200w idle (measured by ups usage - 40% of 500w). i'm just replaced it with newer dual E5-2670 and with the same other stuff it idles about 140w (28% of 500w the same ups). so i think, it's ok with your setup. Quote Link to comment
HellDiverUK Posted September 13, 2017 Share Posted September 13, 2017 The chipset on those boards uses as much power as some more recent CPUs when you count up the northbridge and the southbridge. At work the old Poweredge 2950 machines used about 500W idling with 8 disks and two dual core CPUs. The newest machines we have are Poweredge R515 with dual 6-core Opterons and 10 disks and they idle just over 150W. Old servers are a false economy - they're hot, noisy and drink power. Quote Link to comment
mrbilky Posted September 13, 2017 Author Share Posted September 13, 2017 15 minutes ago, HellDiverUK said: At work the old Poweredge 2950 machines used about 500W idling with 8 disks and two dual core CPUs. ouch! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.