Glacier Posted August 29, 2017 Share Posted August 29, 2017 Hi Im looking for some advice on how to setup my NIC configuration. Im running a unraid VM-server. Im running it on a HP server with an Intel Quad NIC card. The different VMs i'll be running on the server, are required to be connected to different LANs. What would best way to go about this? I looked into passing each nic through to seperat VMs, however all the NIC's are in the same OIMMU grp and enabling acs overide doesn't change that. Quote Link to comment
bonienl Posted August 29, 2017 Share Posted August 29, 2017 Don't overcomplicate things. Enable the bridge function for each NIC (see network settings) and use different bridges for each VM. Keep in mind that if you want to use dynamic (DHCP) settings for each bridge then you need multiple DHCP servers, perhaps easiest would be to just assign static IP addresses. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.