dezai Posted August 14, 2017 Share Posted August 14, 2017 Hello Guy´s, at first / i´m sorry for my bad english skills! I wanted to make my first steps with unraid this weekend but i had a big problem. Hardware: I7 4790K Asus ROG Heroe 16GB RAM GTX 970 GTX 750 ti (for HTPC applications) 2x 512gb SSD 2x 2TB HDD 8x 3TB HDD I tried to make a / GamerPC / NAS / HTPC...... .....so i prepared the usb stick and everything works. I enabled VT-d / etc. and followed the introductions in you´re wiki. But when i tried to enter the webinterface / chrome / firefox / edge can´t find the site. I tried: HTTP://tower the same with the ip adress and i tried to connect me with the grafical interface but firefox pops up and told me it can´t finde the site localhost. Whats the Problem with this build? I tried many versions of unraid, everytime the same problem. I tried the same with my "normal server" with a xeon e3 1230v3 and a b85m eco from msi /the same problems. Where is the bug in my setups? Quote Link to comment
JonathanM Posted August 14, 2017 Share Posted August 14, 2017 1 hour ago, dezai said: i prepared the usb stick and everything works. Did you manually follow directions, or did you use the USB creator tool? I suspect the stick isn't formatted FAT32 as required. Quote Link to comment
brando56894 Posted August 15, 2017 Share Posted August 15, 2017 Going along with the above post, does the system fully boot? Quote Link to comment
dezai Posted August 15, 2017 Author Share Posted August 15, 2017 Good Morning guy´s, stick is formated as Fat32 / and i drag and drop the files on the stick and started the bootable bat. The system is booting up / to this point everything is fine. I can see the "Tower login" screen on the computer with the UNRAID USB Stick. But when i try to connect from an other pc / i can´t connect to the webinterface. What do you mean with: "You try to check again your webserver or reset to factory defaults and am able to log via web interface again" Set factory defaults from my fritzbox router? Why? When i have xpenology installed i have no problems to connect to the computer. Only when i have unraid installed / i can´t connect to the webinterface. but ok, i can try it .... Quote Link to comment
JonathanM Posted August 15, 2017 Share Posted August 15, 2017 6 hours ago, dezai said: I can see the "Tower login" screen on the computer with the UNRAID USB Stick. Go ahead and log in with user root and no password, and type diagnostics at the prompt. Tell us what happens, if it creates a zip file on the flash drive, attach it to your next post. DON'T reset your router, that isn't relevant right now. 1 Quote Link to comment
dezai Posted August 15, 2017 Author Share Posted August 15, 2017 ok and how can i downloade the diagnostics zip. it is created on the tower pc, but it isn´t on the usb stick. How can i downloade the zip folder to my normal pc? Quote Link to comment
JonathanM Posted August 15, 2017 Share Posted August 15, 2017 14 minutes ago, dezai said: it is created on the tower pc, but it isn´t on the usb stick. What path did it create it in? The USB stick should be mounted to /boot when unraid is running, so if it created it elsewhere, copy it to /boot and it should show up on the flash if the flash was prepared and mounted properly. Quote Link to comment
dezai Posted August 16, 2017 Author Share Posted August 16, 2017 It created a zip folder on /boot / but when i plug the usb stick into my "normal" computer / there is now folder /boot Quote Link to comment
JonathanM Posted August 16, 2017 Share Posted August 16, 2017 7 hours ago, dezai said: It created a zip folder on /boot / but when i plug the usb stick into my "normal" computer / there is now folder /boot /boot in unraid is the root of the flash drive. Quote Link to comment
dezai Posted August 22, 2017 Author Share Posted August 22, 2017 Hey Guys, i solved the problem. The problem was the usb stick. I use a SLC usb stick an now everything is nice. Thx for the help Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.