Goshira Posted July 10, 2017 Share Posted July 10, 2017 Hi, i have dell T7500 ram 32gb, ssd 240gb cache for primary disc of 3 vm), and ssd 800 gb for game disc. ssd 800 gb have trouble the last night (frizing the unraid) and no reconosig partition, all my data lost, but reinstall all my data with a backup disc, but the ssd work slow, i dont know if is for a bad configuration or some problem of ssd :/, any can help me with that problem?. sorry my bad english Quote Link to comment
uldise Posted July 10, 2017 Share Posted July 10, 2017 Post Diagnostics - Tools->Diagnostics and post it here. Quote Link to comment
Goshira Posted July 10, 2017 Author Share Posted July 10, 2017 smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.10-unRAID] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: Pliant Product: LB806MC Revision: MS04 Compliance: SPC-4 User Capacity: 800,166,076,416 bytes [800 GB] Logical block size: 512 bytes Formatted with type 2 protection LU is resource provisioned, LBPRZ=1 Rotation Rate: Solid State Device Form Factor: 2.5 inches Logical Unit id: 0x5001e820027ad558 Serial number: 41604440 Device type: disk Transport protocol: SAS (SPL-3) Local Time is: Mon Jul 10 04:12:12 2017 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Disabled or Not Supported === START OF READ SMART DATA SECTION === SMART Health Status: HARDWARE IMPENDING FAILURE GENERAL HARD DRIVE FAILURE [asc=5d, ascq=10] Percentage used endurance indicator: 0% Current Drive Temperature: 30 C Drive Trip Temperature: 85 C Manufactured in week 28 of year 2014 Specified cycle count over device lifetime: 0 Accumulated start-stop cycles: 580 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 0 0 0 0 0 9577.274 3 write: 0 0 0 0 0 9260.248 0 Non-medium error count: 61 No self-tests have been logged ____ My ssd 800gb Diagnostic Quote Link to comment
Goshira Posted July 10, 2017 Author Share Posted July 10, 2017 My ssd 800gb die? i conect with sata/SAS port of my T7500, no a SAS only card I think that's why you can not analyze SMART well, you've never been able to check SMART well in windows or anything else, since it was always bought like this. In if what I want to know is because it is so slow transfer and disk reading, lost data do not care. Quote Link to comment
JonathanM Posted July 10, 2017 Share Posted July 10, 2017 9 hours ago, Goshira said: SMART Health Status: HARDWARE IMPENDING FAILURE GENERAL HARD DRIVE FAILURE [asc=5d, ascq=10] 3 hours ago, Goshira said: My ssd 800gb die? Yes. Quote Link to comment
Goshira Posted July 10, 2017 Author Share Posted July 10, 2017 ok tnx, and next problem, still low speed on a new HDD 2tb, 5mb/s Quote Link to comment
JonathanM Posted July 10, 2017 Share Posted July 10, 2017 Post the complete diagnostics zip file, as was asked for twice before. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.