Frank1940 Posted June 17, 2017 Share Posted June 17, 2017 2 hours ago, BRiT said: You could probably wait a week or two for a newer Firefox version. Isn't that the pace of them? Only if someone has made the developers aware that they have a problem. Quote Link to comment
bdydrp Posted June 20, 2017 Share Posted June 20, 2017 On 17/06/2017 at 0:18 AM, Frank1940 said: @bonienl I cleared the browser cache and that didn't fix the problem. Additional information: The browser is Firefox version 54.0 (64 bit). That is the latest Firefox version of this release variant. (A second observation is that I am having the same problem with version 6.4.0-rc3.) On 17/06/2017 at 0:23 AM, bonienl said: Firefox version 53 works fine, but version 54 exhibits your problem. Just checked this also and can confirm the checkbox does disappear when Firefox is upgraded to V54.0 Screenshots attached Quote Link to comment
bonienl Posted June 20, 2017 Share Posted June 20, 2017 There is a bug report with Mozilla. Problem is known, and fixed. Just need to wait for a version with the fix. Quote Link to comment
Frank1940 Posted June 20, 2017 Share Posted June 20, 2017 2 hours ago, bonienl said: There is a bug report with Mozilla. Problem is known, and fixed. Just need to wait for a version with the fix. Unfortunately, this may be as late as the second week in August if I can read the Firefox release schedule correctly... Quote Link to comment
sacretagent Posted June 25, 2017 Share Posted June 25, 2017 r2d2-diagnostics-20170625-1024.zipHi, Got same lockup issue.... once a little bit load on the server it locks up... can't run parity check ....as then it locks up... same with plex scan .... not sure when it started i know 15th it ran a complete parity check without finding errors.... last boot now i disabled automount of my smb share of the other server if people check the logs .... only way to get to the GUI after a "unclean shutdown" is to remove a disk so it won't start {so any errors about disk 10 not being there is because i removed it before boot} attached diagnosis report... will run memtest now for a few hours... Quote Link to comment
JorgeB Posted June 25, 2017 Share Posted June 25, 2017 4 hours ago, sacretagent said: only way to get to the GUI after a "unclean shutdown" is to remove a disk so it won't start You can disable array auto start (Settings -> Disk Settings -> Enable auto start) Try booting unRAID in safe mode to see if the issue remains. Quote Link to comment
sacretagent Posted June 26, 2017 Share Posted June 26, 2017 weird Turned out to be a disk causing this ? i removed the disk 10 which i added last and hey parity rebuild succeeded overnight .... not sure what could be the problem... disk is OK according smart.... will try to change cable between disk and sil controller .... any other bright ideas to further troubleshoot this? power should be ok this enclosure ran 13 disks for years... Quote Link to comment
whwunraid Posted June 26, 2017 Share Posted June 26, 2017 Well I updated to 6.3.5 this morning and at first all seemed fine, I then installed the IPMI plugin and shortly there after 5 of the 8 cores in my servers CPU (AMD 8320e) are pegged. Behavior I am noticing: - Pegged cores 100% (5) - It takes several minutes to move from tab to tab in the GUI - It take 2-3 minutes to get to the login for the GUI - SMB shares respond very slowly if at all - Streaming media is touch and go I have uninstalled IPMI, stopped the array and issued a shutdown command, and that is not even happening. I am going to have to hit the power button. I have attached a diagnostic file, I looked thru it but nothing jumped out at me, can someone else take a look and see what they can find. I would appreciate any suggestions. It is not a issue with security apps as someone mentioned previously in the post as I have tried from 3 different machines, 1 with no security apps installed, same issues still apply. Thanks for the help... unraid1-diagnostics-20170626-1326.zip Quote Link to comment
whwunraid Posted June 26, 2017 Share Posted June 26, 2017 OK... restart after removing that IPMI plugin seems to have done the trick, will post in that support thread and see what developer says. If anyone would still look at logs I'd appreciate any feedback... thanks. Will Quote Link to comment
ezhik Posted June 28, 2017 Share Posted June 28, 2017 (edited) I've also noticed issues with pegged cores when launching VMs (VMs would hang), not much logging available... Which is what is driving me nuts at the moment. EDIT: This has been resolved. Proper CPU Pinning fixes the issue. Edited July 8, 2017 by ezhik Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.