hermy65 Posted May 22, 2017 Share Posted May 22, 2017 (edited) I posted here this morning about an issue i was having which turned into something else so i figured that this warranted a different thread since the issue no longer matched. What started out as my machine being unresponsive then upon reboot it would work for a few minutes then throw an Disabling IRQ #18 error which made the GUI and any containers/vms no longer function although i could still access the array. One user told me to move my second NIC to another slot which i did but it didnt help, so i removed the 2nd card completely and am now running onboard and im experiencing the same issues without seeing the IRQ #18 error. Since the machine is non responsive i cannot run diagnostics from the gui, tried running it from cmd but it never actually finishes. I thought perhaps it was an issue with 6.3.4 so i downgraded to 6.3.3 but that didnt help either. The best i can do is give you my syslog that i copied via cmd and hopefully that helps to some extent. Not sure if this helps now either but here are the results of cat /proc/interrupts - prior to pulling my other NIC line 18 had eth0 listed EDIT: Diagnostics finally worked so they are attached as well! root@Storage:~# cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 0: 29 0 0 0 0 0 0 0 IR-IO-APIC 2-edge timer 1: 1 0 0 0 0 0 0 1 IR-IO-APIC 1-edge i8042 8: 53 0 0 1 1 0 0 0 IR-IO-APIC 8-edge rtc0 9: 0 0 0 0 0 0 0 0 IR-IO-APIC 9-fasteoi acpi 12: 4 0 0 0 0 0 0 0 IR-IO-APIC 12-edge i8042 16: 85 2 4 1 13 3 2 9 IR-IO-APIC 16-fasteoi ehci_hcd:usb1 18: 0 0 0 0 0 0 0 0 IR-IO-APIC 18-fasteoi i801_smbus 19: 282611 26913 18752 13007 103143 102744 81838 40706 IR-IO-APIC 19-fasteoi ata_piix, ata_piix 23: 3520 623 597 423 1951 1380 744 694 IR-IO-APIC 23-fasteoi ehci_hcd:usb2 24: 0 0 0 0 0 0 0 0 DMAR-MSI 0-edge dmar0 25: 0 0 0 0 0 0 0 0 DMAR-MSI 1-edge dmar1 28: 289 33 19 23 126 33 25 34 IR-PCI-MSI 2097152-edge xhci_hcd 29: 0 0 0 0 0 0 0 0 IR-PCI-MSI 2097153-edge xhci_hcd 30: 0 0 0 0 0 0 0 0 IR-PCI-MSI 2097154-edge xhci_hcd 31: 0 0 0 0 0 0 0 0 IR-PCI-MSI 2097155-edge xhci_hcd 32: 0 0 0 0 0 0 0 0 IR-PCI-MSI 2097156-edge xhci_hcd 33: 0 0 0 0 0 0 0 0 IR-PCI-MSI 2097157-edge xhci_hcd 34: 0 0 0 0 0 0 0 0 IR-PCI-MSI 2097158-edge xhci_hcd 35: 0 0 0 0 0 0 0 0 IR-PCI-MSI 2097159-edge xhci_hcd 36: 70877 6830 4978 3240 20018 12940 9281 6576 IR-PCI-MSI 524288-edge mpt2sas0-msix0 37: 372337 43280 25194 19402 123527 81982 60890 46134 IR-PCI-MSI 409600-edge eth0 38: 58305 4623 3762 2280 12847 9519 7089 5222 IR-PCI-MSI 1048576-edge mpt2sas1-msix0 39: 58951 4757 4022 2465 12296 9615 7070 5059 IR-PCI-MSI 1572864-edge mpt2sas2-msix0 NMI: 0 0 0 0 0 0 0 0 Non-maskable interrupts LOC: 557747 555080 546294 658922 636080 486156 435353 406441 Local timer interrupts SPU: 0 0 0 0 0 0 0 0 Spurious interrupts PMI: 0 0 0 0 0 0 0 0 Performance monitoring interrupts IWI: 0 0 0 0 0 0 0 0 IRQ work interrupts RTR: 0 0 0 0 0 0 0 0 APIC ICR read retries RES: 210030 211826 198842 171955 289050 257279 328987 316112 Rescheduling interrupts CAL: 8458 7961 8816 7957 9253 8715 7401 6328 Function call interrupts TLB: 7845 7495 8179 7344 8682 8082 6781 5816 TLB shootdowns TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts DFR: 0 0 0 0 0 0 0 0 Deferred Error APIC interrupts MCE: 0 0 0 0 0 0 0 0 Machine check exceptions MCP: 5 5 5 5 5 5 5 5 Machine check polls ERR: 0 MIS: 0 PIN: 0 0 0 0 0 0 0 0 Posted-interrupt notification event PIW: 0 0 0 0 0 0 0 0 Posted-interrupt wakeup event syslog.txt storage-diagnostics-20170522-1331.zip Edited May 22, 2017 by hermy65 Quote Link to comment
bonienl Posted May 22, 2017 Share Posted May 22, 2017 Can't say if it solves your problem, but it is recommended to set an include or exclude list for folders to cache with the cache_dirs plugin. Right now it caches folders which you problably don't want/need and consuming unnecessary memory resources. Quote Link to comment
JorgeB Posted May 22, 2017 Share Posted May 22, 2017 Boot in safe mode (I believe dockers don't start in safe mode now, if they do stop them all), if it helps then start in normal mode and install plugins and start dockers one at a time. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.