tucansam Posted March 20, 2017 Share Posted March 20, 2017 6.2.4, one parity, seven data, one outside the array. The disk outside the array always shows temperature, and never spins down. The eight member drives spin down, and temperature reading becomes an asterisk, normal as far as I am aware. When a disk is accessed, I can see its read/write counters moving, but the temp is never displayed. If I refresh the page, same thing -- counters click away, disk temp remains an asterisk. If I click "spin up all disks," all disks spin up, and temps are displayed again. Until they spin down. Then rinse and repeat. Any thoughts? Quote Link to comment
JorgeB Posted March 20, 2017 Share Posted March 20, 2017 Decrease the very high default poling time: Settings -> Disk Settings -> Tunable (poll_attributes) Recommend 60 seconds. 1 Quote Link to comment
tucansam Posted March 20, 2017 Author Share Posted March 20, 2017 Appears to have worked, thanks. Don't remember ever having this problem before. When did the default values change? Quote Link to comment
JorgeB Posted March 20, 2017 Share Posted March 20, 2017 Don't remember exactly but a long time ago, during v6 or 6.1 Quote Link to comment
bonienl Posted March 20, 2017 Share Posted March 20, 2017 The default value of 30 minutes (1800 sec) is there from the time unRAID v6.0 was introduced. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.