USB Passthrough issues (syslog full)


splnut

Recommended Posts

I am trying to pass through a wireless receiver for an xbox 360. I have tried 2 different adapters with multiple VM's (i440fx/Q35, Windows/linux, etc) . When the device is passed through to a VM, I receive the following error continuously (247 times per second).

 

Jan 15 23:34:27 Tower kernel: usb 2-1.3.2: reset full-speed USB device number 9 using ehci-pci
Jan 15 23:34:27 Tower kernel: usb 2-1.3.2: usbfs: usb_submit_urb returned -28
Jan 15 23:34:27 Tower kernel: usb 2-1.3.2: usbfs: usb_submit_urb returned -28
Jan 15 23:34:27 Tower kernel: usb 2-1.3.2: usbfs: usb_submit_urb returned -28
Jan 15 23:34:27 Tower kernel: usb 2-1.3.2: usbfs: usb_submit_urb returned -28
Jan 15 23:34:27 Tower kernel: usb 2-1.3.2: usbfs: usb_submit_urb returned -28
Jan 15 23:34:27 Tower kernel: usb 2-1.3.2: usbfs: usb_submit_urb returned -28
Jan 15 23:34:27 Tower kernel: usb 2-1.3.2: usbfs: usb_submit_urb returned -28
Jan 15 23:34:27 Tower kernel: usb 2-1.3.2: usbfs: usb_submit_urb returned -28
Jan 15 23:34:27 Tower kernel: usb 2-1.3.2: usbfs: usb_submit_urb returned -28
Jan 15 23:34:27 Tower kernel: usb 2-1.3.2: usbfs: usb_submit_urb returned -28
Jan 15 23:34:27 Tower kernel: usb 2-1.3.2: usbfs: usb_submit_urb returned -28
Jan 15 23:34:27 Tower kernel: usb 2-1.3.2: usbfs: usb_submit_urb returned -28
Jan 15 23:34:27 Tower kernel: usb 2-1.3.2: usbfs: usb_submit_urb returned -28
Jan 15 23:34:27 Tower kernel: usb 2-1.3.2: usbfs: usb_submit_urb returned -28
Jan 15 23:34:27 Tower kernel: usb 2-1.3.2: usbfs: usb_submit_urb returned -28
Jan 15 23:34:27 Tower kernel: usb 2-1.3.2: usbfs: usb_submit_urb returned -28

 

The device appears to work correctly in the VM, although some issues have arose. VM's are unable to reboot (the VM just shuts down), and they randomly stop running. I have not attempted to pass through an entire controller, since I have only 1 at the moment. Any suggestions?

tower-diagnostics-20170117-1035.zip

Link to comment

Is your USB a VIA chipset, if so there have been a few post recently that the VIA chipset does not work well. I have a VIA chipset that I am passing through and it hangs up my VM on reboot from time to time. I have been lazy to get a different one and I believe people have been having good luck with NEC chipset on the USB controller.

Link to comment

Shows as an INTEL in the System Devices. I did just get a new 4 port pci card that I plan on installing this week to see if that changes anything.

 

00:1a.0 USB controller [0c03]: Intel Corporation C600/X79 series chipset USB2 Enhanced Host Controller #2 [8086:1d2d] (rev 06)
00:1d.0 USB controller [0c03]: Intel Corporation C600/X79 series chipset USB2 Enhanced Host Controller #1 [8086:1d26] (rev 06)

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.