publicENEMY Posted December 19, 2016 Share Posted December 19, 2016 Its been hours since I started preclearing from preclearing plugin. Here are the logs. /usr/local/emhttp/plugins/preclear.disk/script/preclear_disk.sh --notify 7 --frequency 1 --cycles 1 --no-prompt /dev/sdf Status is Starting... Something wrong or its normal? Quote Link to comment
John_M Posted December 19, 2016 Share Posted December 19, 2016 No. That's not normal. The process hasn't actually started. See this thread. Stop it and try starting it again. If that doesn't work, try a different browser. Quote Link to comment
publicENEMY Posted December 20, 2016 Author Share Posted December 20, 2016 tried ie edge, ie 11, firefox and chrome. None of them works. Any ideas? Quote Link to comment
gfjardim Posted December 20, 2016 Share Posted December 20, 2016 tried ie edge, ie 11, firefox and chrome. None of them works. Any ideas? Can you run /usr/local/emhttp/plugins/preclear.disk/script/preclear_disk.sh --notify 7 --frequency 1 --cycles 1 --no-prompt /dev/sdf in the console and post any errors? Quote Link to comment
publicENEMY Posted December 20, 2016 Author Share Posted December 20, 2016 This is the response root@Tower:~# /usr/local/emhttp/plugins/preclear.disk/script/preclear_disk.sh --notify 7 --frequency 1 --cycles 1 --no-prompt /dev/sdf The disk '/dev/sdf' is part of unRAID's array, or is assigned as a cache device. Please choose another one from below: ==================================== Disks not assigned to the unRAID array (potential candidates for clearing) ======================================== /dev/sdb = ST1000LM024_HN-M101MBB_S2ZPJ9BD326991 /dev/sdc = ST3000DM001-1CH166_W1F1F6QF /dev/sdm = WDC_WD30EZRX-00MMMB0_WD-WCAWZ1881157 root@Tower:~# I did assign the drive before and start the array(it rebuilds), but cancel minutes later because it doesnt preclear(i have the impression that it will auto preclear, but it doesnt) Before running the script, i have stop the array and set the disk to no device. What should i do? Quote Link to comment
John_M Posted December 20, 2016 Share Posted December 20, 2016 Not sure what you're trying to achieve but you can't pre-clear a disk that's already assigned to the array. EDIT: Replied to your other post. Quote Link to comment
publicENEMY Posted December 20, 2016 Author Share Posted December 20, 2016 disk 1 is failing. i bought new drive, disk x. i forgot to preclear disk x before adding to array. i then cancel rebuilding disk x, and want to preclear disk x before adding disk x to array. make sense? Quote Link to comment
publicENEMY Posted December 20, 2016 Author Share Posted December 20, 2016 Managed to preclear the disk after starting the array without the disk. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.