ados75 Posted May 29, 2023 Share Posted May 29, 2023 Hello is it possible to connect two TVHeadend servers. I want to bring channels from TVHeadend Server A to TVHeadend Server B. but the client accesses only server B Br ados Quote Link to comment
eric90000 Posted June 17, 2023 Share Posted June 17, 2023 (edited) Hi! I am just researching at the moment before I purchase equipment. Is it possible to use a combination of tuners with TVheadend in Unraid - e.g. a PCIe DVB-S2 tuner alongside a networked DVB-T2 HDHomeRun quad tuner? Does anyone know if the TBS 6981 card (DVB-S2 Dual Tuner) is a known working card and would integrate with TVheadend with minimal issues? If anyone has a recommendation for a DVB-S2/DVB-T2combo tuner for Freeview & Freesat that is compatible with this TVheadend docker image (Unicable compatible for the satellite would be a big bonus) I would greatly appreciate the steer in the right direction! Thanks Edited June 17, 2023 by eric90000 Quote Link to comment
alturismo Posted June 17, 2023 Share Posted June 17, 2023 5 hours ago, eric90000 said: e.g. a PCIe DVB-S2 tuner alongside a networked DVB-T2 HDHomeRun quad tuner? yes, works fine with TVH, Combo of SAT & Network Tuners, preferable SATIP Standard, but TVH also has native HDHR support afaik 5 hours ago, eric90000 said: If anyone has a recommendation for a DVB-S2/DVB-T2combo tuner for Freeview & Freesat that is compatible with this TVheadend docker image (Unicable compatible for the satellite would be a big bonus) I would greatly appreciate the steer in the right direction! im using a DD Max S8 as unicable card here as sample from my setup, unicable pcie card and a network SATIP Tuner Quote Link to comment
eric90000 Posted June 17, 2023 Share Posted June 17, 2023 16 minutes ago, alturismo said: yes, works fine with TVH, Combo of SAT & Network Tuners, preferable SATIP Standard, but TVH also has native HDHR support afaik im using a DD Max S8 as unicable card Thank you very much, that is great to know a combination of SATIP and tuner cards works well for you. I will check out those devices you mentioned. From what I gather from reading online, the general consensus seems to be that the SATIP approach is the easiest, as it rules out driver issues with physical PCIe cards. I had been trying to find a Digibit R1 SATIP device, which could be paired with something like a HDHomeRun for DVB-T. I really appreciate the screenshot of your setup - it will be handy when I come to setting mine up. Quote Link to comment
bucky2076 Posted June 18, 2023 Share Posted June 18, 2023 and here is the config for my hdhomerun. Nothing special needed in the docker xml to make this work, and appears rock solid. 1 Quote Link to comment
Doktor-X Posted December 23, 2023 Share Posted December 23, 2023 (edited) Help, I'm stuck. Im trying to setup epg with url file location but i dont know how to edit tv_grab_file in bin folder to auto download epg Edited December 23, 2023 by Doktor-X Quote Link to comment
Mrtj18 Posted December 23, 2023 Share Posted December 23, 2023 1 hour ago, Doktor-X said: Help, I'm stuck. Im trying to setup epg with url file location but i dont know how to edit tv_grab_file in bin folder to auto download epg Check my post on November 7 22 maybe it can help you get started in the right direction. Quote Link to comment
Doktor-X Posted December 24, 2023 Share Posted December 24, 2023 13 hours ago, Mrtj18 said: Check my post on November 7 22 maybe it can help you get started in the right direction. Thanks, i did saw it, but i did not manage to get it to work like that, but then i just downloaded epg file with wget and place it to /mnt/cache/appdata/tvheadend/data folder and it works, now i just to need to automate download from web to specific folder Quote Link to comment
Mrtj18 Posted December 24, 2023 Share Posted December 24, 2023 There's an option within TV headend ( I don't have access to my server at the moment) where it is set to run a cron job that will auto pull your epg data. Make sure you have that set. Should be under the epg grabber section. Quote Link to comment
Doktor-X Posted December 24, 2023 Share Posted December 24, 2023 (edited) 26 minutes ago, Mrtj18 said: There's an option within TV headend ( I don't have access to my server at the moment) where it is set to run a cron job that will auto pull your epg data. Make sure you have that set. Should be under the epg grabber section. This is just for update tvh epg database from file, but i need to automate download of epg file itself from web location once in a while to be able to keep up with epg changes. I manage to automate this using user scripts plugin and i made simple wget script like that "wget -O /mnt/cache/appdata/tvheadend/data/epg.xml http://user:password@ip:9981/xmltv" I'm pulling epg from another tvh server Edited December 24, 2023 by Doktor-X 1 Quote Link to comment
chakobsa Posted January 28 Share Posted January 28 (edited) **** BELOW FIXED **** Turns out the HDHomeRun tuner was going faulty. Replaced tuner and now working Hi, i've been using this TVHEADEND docker for many years without issue. Tuner: HDHomeRun Connect Quatro HDHR5-4DT, Firmware latest - 20231214. I'm in the UK using DVB-T/T2. This is used through Kodi and OSMC and I have just recently noticed I can't view any channel. Checking the docker I can still see the HDHomeRun and get green lights on all 4 tuners. However when I look at the Muxes the scan results are all set at failed. You can see I previously had services and these were mapped. No matter what I try I cannot scan the Muxes which is why it is not working through Kodi. I also have an HDMI to iptv converter which allows for Sky to be distributed via TVHeadend and that still works OK. I have tested: - I do have a strong reception on my TV Ariel - Using HDHomeRun software on the PC I tune into stations and can watch TV (So I know the HDHomeRun unit is working) - Using HDHomeRun software on a Fire Stick I can watch TV so again the HDHomeRun unit is working. There has been some Firmware updates on the HDHomeRun which were automatically applied. As I normally watch TV through Sky I did not take much notice as I don't the HDHomeRun as my daily driver. Has anyone else using HDHomeRun Quattro or Duo running through TVHeadend noticed their system not working in the last few months? Any suggestions on what I can do? Many thanks Edited February 1 by chakobsa Quote Link to comment
fcscholz Posted March 14 Share Posted March 14 (edited) On 1/28/2024 at 11:30 AM, chakobsa said: **** BELOW FIXED **** Turns out the HDHomeRun tuner was going faulty. Replaced tuner and now working Hi, i've been using this TVHEADEND docker for many years without issue. Tuner: HDHomeRun Connect Quatro HDHR5-4DT, Firmware latest - 20231214. I'm in the UK using DVB-T/T2. This is used through Kodi and OSMC and I have just recently noticed I can't view any channel. Checking the docker I can still see the HDHomeRun and get green lights on all 4 tuners. However when I look at the Muxes the scan results are all set at failed. You can see I previously had services and these were mapped. No matter what I try I cannot scan the Muxes which is why it is not working through Kodi. I also have an HDMI to iptv converter which allows for Sky to be distributed via TVHeadend and that still works OK. I have tested: - I do have a strong reception on my TV Ariel - Using HDHomeRun software on the PC I tune into stations and can watch TV (So I know the HDHomeRun unit is working) - Using HDHomeRun software on a Fire Stick I can watch TV so again the HDHomeRun unit is working. There has been some Firmware updates on the HDHomeRun which were automatically applied. As I normally watch TV through Sky I did not take much notice as I don't the HDHomeRun as my daily driver. Has anyone else using HDHomeRun Quattro or Duo running through TVHeadend noticed their system not working in the last few months? Any suggestions on what I can do? Many thanks I've got an similar issus... But my Tuner works well (with a TVHeadend on a Pi) 😞 Edited March 14 by fcscholz Error Quote Link to comment
boragthung70 Posted Sunday at 09:42 AM Share Posted Sunday at 09:42 AM Is there any chance of adding the day back in to the scheduled start/end time columns on the gui? I still have the day listed on older version (4.3-2091) on my libreelec box, so this oft-updated docker version has removed this. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.