UPS not reporting load

[mrmarkfr]

I have an issue where my UPS is not reporting the load usage, so it can't determine the run time. All the rest of the UPS details are showing up, except for load.

I thought it might have to do with my unmenu not working, but I fixed that today, and same issue.

The only anomaly I can see is that for all my other packages(mail, clean powerdown, etc, they show as currently installed, will automatically be reinstalled upon re-boot.  The package for the APCUPSD shows as installed, not downloaded.

Here's my ups info, anyone have any ideas?

APC      : 001,034,0851

DATE    : 2016-01-10 16:31:22 -0500 

HOSTNAME : unraid1

VERSION  : 3.14.13 (02 February 2015) slackware

UPSNAME  : unraid1

CABLE    : USB Cable

DRIVER  : USB UPS Driver

UPSMODE  : Stand Alone

STARTTIME: 2016-01-10 15:29:52 -0500 

MODEL    : Back-UPS ES 550G

STATUS  : ONLINE

LINEV    : 121.0 Volts

LOADPCT  : 0.0 Percent

BCHARGE  : 100.0 Percent

TIMELEFT : 450.0 Minutes

MBATTCHG : 30 Percent

MINTIMEL : 30 Minutes

MAXTIME  : 1200 Seconds

SENSE    : Medium

LOTRANS  : 92.0 Volts

HITRANS  : 139.0 Volts

ALARMDEL : 30 Seconds

BATTV    : 13.5 Volts

LASTXFER : Unacceptable line voltage changes

NUMXFERS : 0

TONBATT  : 0 Seconds

CUMONBATT: 0 Seconds

XOFFBATT : N/A

STATFLAG : 0x05000008

SERIALNO : 4B1511P32081 

BATTDATE : 2015-03-12

NOMINV  : 120 Volts

NOMBATTV : 12.0 Volts

FIRMWARE : 904.W1 .D USB FW:W1

END APC  : 2016-01-10 16:31:44 -0500 

[cfloener]

Might fall under the same problem I am having.

 

http://lime-technology.com/forum/index.php?topic=45088.0

[CHBMB]

It is the same problem by the looks of it.  Might be better if the OP posted there so dlandon has it all in one thread.  mrmarkfr could you also collect diagnostics.zip and post it on the thread cfloener has linked to..

[mrmarkfr]

Posted diag.zip in the other post, this thread can be deleted