linuxserver.io

[Support] Linuxserver.io - OpenVPN-AS

Recommended Posts

linuxserver_medium.png

 

Application Name: OpenVPN-AS

Application Site: https://openvpn.net/index.php/access-server/overview.html

Docker Hub: https://hub.docker.com/r/linuxserver/openvpn-as/

Github: https://github.com/linuxserver/docker-openvpnas

 

Please post any questions/issues relating to this docker you have in this thread.

 

If you are not using Unraid (and you should be!) then please do not post here, rather use the linuxserver.io forum for support.

  • Upvote 3

Share this post


Link to post
Share on other sites

Installed the docker... I can reach the admin page when using bridge mode, however not in host mode. In bridge mode the connection test states my server is not reachable.

Running VM's was well with Br0 enabled. Not sure if this has anything to do with it.

 

 

 

Share this post


Link to post
Share on other sites

Installed the docker... I can reach the admin page when using bridge mode, however not in host mode. In bridge mode the connection test states my server is not reachable.

Running VM's was well with Br0 enabled. Not sure if this has anything to do with it.

 

it must be run in both host and privileged modes.

 

https://github.com/linuxserver/docker-openvpnas

Share this post


Link to post
Share on other sites

Hey team, thanks for the docker she is a beauty. May I ask how I change the passwords of users? There doesn't seem to be an option in the web interface like there was with the other docker.

Share this post


Link to post
Share on other sites

Got everything working since a couple of days, however this morning i restarted and it would not start anymore. I think it has to do with initial ubuntu it downloads during startup. It takes place, but once download finishes the docker stops.... After reading package list... Tried reinstalling, but the same issue....

Share this post


Link to post
Share on other sites

Deleted not only the docker but also the files outside the docker and reinstalled. All working again. Things must have gone sour when in ran the unraid permissions script on my appdata disk.

Share this post


Link to post
Share on other sites

sorry about delay in replying...

 

but don't do that (run permissions script on appdata share) , bad idea in general...

 

 

 

Share this post


Link to post
Share on other sites

Happened unintentionally, not knowing that when you run the script for all disks, that it also runs for disks that are mounted via unassigned devices. These as not mentioned in the dropdown list, but are apparently called upon.

Share this post


Link to post
Share on other sites

I'm sorry for asking such a blatant question, but how do I add user?

I know that I can add users in the "User Permissions" tab from the Web interface, but as far as I know these must some how correlate to the users in Unraid.

 

I appreciate the help.

Daniel

Share this post


Link to post
Share on other sites

@schpongo, I am away from my machine right now so I am sorry for bad information. I believe you add users in the tab you mentioned. The trouble is you cannot set a password for those users. For now I believe you can only use the admin user really.

Share this post


Link to post
Share on other sites

I'm sorry for asking such a blatant question, but how do I add user?

I know that I can add users in the "User Permissions" tab from the Web interface, but as far as I know these must some how correlate to the users in Unraid.

 

I appreciate the help.

Daniel

 

Hi schpongo,

 

The users in OpenVPN-AS / Unraid do not correlate at all, they are separate. See the attached file, that will who you how to add users under the "User Permissions" Section.

 

Once you have saved the user, click "Show" and there you configure the password.

2015-10-27_08_08_41-OpenVPN_Access_Server_User_Permissions.png.1361f25f2d117e1430a8f4b8ffeb7286.png

Share this post


Link to post
Share on other sites

I'm having an extremely hard time trying to set this up. What are the key options I in the admin panel that I need to change? I have the correct ports forward on my router, but the connectivity test always fails, so I must have some settings wrong somewhere

Share this post


Link to post
Share on other sites

How do i log into this docker.

It's in the readme on the dockerhub link.

Share this post


Link to post
Share on other sites

I'm having an extremely hard time trying to set this up. What are the key options I in the admin panel that I need to change? I have the correct ports forward on my router, but the connectivity test always fails, so I must have some settings wrong somewhere

Nem, give us a little more to go on and we'll see what we can do...

Share this post


Link to post
Share on other sites

How do i log into this docker.

It's in the readme on the dockerhub link.

 

Thank you.

 

I guess i have to do some research on how to properly set this up, because I'm completely lost on how to set this up or what are the possibilities of configuration. 

 

Looking for any tutorials on how to set this up?

Share this post


Link to post
Share on other sites

I am having two issues:

 

(1) When I configure the docker to use "host" (versus bridge) I cannot access the tool via the Web GUI. It works fine when using "bridge" but in reading the instructions, this is not correct. Screen shot attached.

 

(2) When trying to change the admin password via the instructions at the docker hub("docker exec -it openvpnas passwd admin ") I get "Error response from daemon: no such id: openvpnas

 

Any ideas would be most appreciated - Thanks!

Clipboard02.jpg.4cfdc07b25ce8eb5b1ed589615da296c.jpg

Share this post


Link to post
Share on other sites

I am having two issues:

 

(1) When I configure the docker to use "host" (versus bridge) I cannot access the tool via the Web GUI. It works fine when using "bridge" but in reading the instructions, this is not correct. Screen shot attached.

 

(2) When trying to change the admin password via the instructions at the docker hub("docker exec -it openvpnas passwd admin ") I get "Error response from daemon: no such id: openvpnas

 

Any ideas would be most appreciated - Thanks!

 

Try

docker exec -it openvpn-as passwd admin

  obviously change passwd to whatever you want the password to be.

Share this post


Link to post
Share on other sites

I seem to be having an issue with the installation of the OpenVPN-AS docker. After installing the docker App via CA Plugin I accessed the App GUI.

 

I have nothing downloading and plenty of b/w available to the app. 2.5MB/s to be exact. I logged on using the default user id and password and am stuck on the installation screen which says:

 

"Please click here to continue to download OpenVPN Connect. You will be automatically connected after the installation has finished."

 

It has been about 45 mins and I am still stuck on the installation web page (see screenshot).

 

I have tried reloading the URL and logging in again. Takes me straight back to the installation web page.

 

There is nothing in the log that I can see that is wrong so far. Here it is. Can anyone help?

 

Please enter 'yes' to indicate your agreement [no]: 
Once you provide a few initial configuration settings,
OpenVPN Access Server can be configured by accessing
its Admin Web UI using your Web browser.

Will this be the primary Access Server node?
(enter 'no' to configure as a backup or standby node)
> Press ENTER for default [yes]: 
Please specify the network interface and IP address to be
used by the Admin Web UI:
(1) all interfaces: 0.0.0.0
(2) br0: 192.168.1.2
(3) docker0: 172.17.42.1
(4) virbr0: 192.168.122.1
(5) eth0: 192.168.1.2
(6) vetheda354d: 172.17.42.1
(7) virbr0-nic: 192.168.122.1
Please enter the option number from the list above (1-7).
> Press Enter for default [2]: 
Please specify the port number for the Admin Web UI.
> Press ENTER for default [943]: 
Please specify the TCP port number for the OpenVPN Daemon
> Press ENTER for default [1194]: 
Should client traffic be routed by default through the VPN?
> Press ENTER for default [yes]: 
Should client DNS traffic be routed by default through the VPN?
> Press ENTER for default [yes]: 
Use local authentication via internal DB?
> Press ENTER for default [no]: 
Private subnets detected: ['192.168.1.0/24', '192.168.122.0/24', '172.17.0.0/16']

Should private subnets be accessible to clients by default?
> Press ENTER for default [yes]: 
To initially login to the Admin Web UI, you must use a
username and password that successfully authenticates you
with the host UNIX system (you can later modify the settings
so that RADIUS or LDAP is used for authentication instead).

You can login to the Admin Web UI as "openvpn" or specify
a different user account to use for this purpose.

Do you wish to login to the Admin UI as "openvpn"?
> Press ENTER for default [yes]: 
> Specify the username for an existing user or for the new user account: Note: This user already exists.

> Please specify your OpenVPN-AS license key (or leave blank to specify later): 

Initializing OpenVPN...
Adding new user login...
useradd -s /sbin/nologin "admin"
Writing as configuration file...
Perform sa init...
Wiping any previous userdb...
Creating default profile...
Modifying default profile...
Adding new user to userdb...
Modifying new user as superuser in userdb...
Getting hostname...
Hostname: main
Preparing web certificates...
Getting web user account...
Adding web group account...
Adding web group...
Adjusting license directory ownership...
Initializing confdb...
Generating init scripts...
Generating PAM config...
Generating init scripts auto command...
Starting openvpnas...

NOTE: Your system clock must be correct for OpenVPN Access Server
to perform correctly. Please ensure that your time and date
are correct on this system.

Initial Configuration Complete!

You can now continue configuring OpenVPN Access Server by
directing your Web browser to this URL:

https://192.168.1.2:943/admin
Login as "admin" with the same password used to authenticate
to this UNIX host.

During normal operation, OpenVPN AS can be accessed via these URLs:
Admin UI: https://192.168.1.2:943/admin
Client UI: https://192.168.1.2:943/

See the Release Notes for this release at:
http://www.openvpn.net/access-server/rn/openvpn_as_2_0_20.html

* Stopping openvpnas openvpnas
...done.
MOD Default {u'admin_ui.https.ip_address': u'all'} {u'admin_ui.https.ip_address': 'eth0'}
MOD Default {u'cs.https.ip_address': u'all'} {u'cs.https.ip_address': 'eth0'}
MOD Default {u'vpn.daemon.0.listen.ip_address': u'all'} {u'vpn.daemon.0.listen.ip_address': 'eth0'}
MOD Default {u'vpn.daemon.0.server.ip_address': u'all'} {u'vpn.daemon.0.server.ip_address': 'eth0'}
Jan 3 14:03:00 main syslog-ng[196]: syslog-ng starting up; version='3.5.3'
Jan 3 14:17:01 main /USR/SBIN/CRON[295]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 3 15:17:01 main /USR/SBIN/CRON[298]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 3 16:17:01 main /USR/SBIN/CRON[301]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)

-----------------------------------
_ _ _
| |___| (_) ___
| / __| | |/ _ \ 
| \__ \ | | (_) |
|_|___/ |_|\___/
|_|

Brought to you by linuxserver.io
-----------------------------------
GID/UID
-----------------------------------
User uid: 99
User gid: 100
-----------------------------------

We are now refreshing packages from apt repositorys, this *may* take a while
MOD Default {} {}
MOD Default {} {}
MOD Default {} {}
MOD Default {} {}
Jan 3 17:06:06 main syslog-ng[77]: syslog-ng starting up; version='3.5.3'
Jan 3 17:17:01 main /USR/SBIN/CRON[177]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 3 18:17:01 main /USR/SBIN/CRON[180]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 3 19:17:01 main /USR/SBIN/CRON[183]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 3 20:17:01 main /USR/SBIN/CRON[186]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 3 21:17:01 main /USR/SBIN/CRON[189]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 3 22:17:01 main /USR/SBIN/CRON[192]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 3 23:17:01 main /USR/SBIN/CRON[195]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 00:17:01 main /USR/SBIN/CRON[198]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 01:17:01 main /USR/SBIN/CRON[201]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 02:17:01 main /USR/SBIN/CRON[204]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 03:17:01 main /USR/SBIN/CRON[207]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 04:17:01 main /USR/SBIN/CRON[210]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 05:17:01 main /USR/SBIN/CRON[213]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 06:17:01 main /USR/SBIN/CRON[216]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 06:25:01 main /USR/SBIN/CRON[219]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ))
Jan 4 07:17:01 main /USR/SBIN/CRON[292]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 08:17:01 main /USR/SBIN/CRON[295]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 09:17:01 main /USR/SBIN/CRON[298]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 10:17:01 main /USR/SBIN/CRON[301]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 11:17:01 main /USR/SBIN/CRON[304]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 12:17:01 main /USR/SBIN/CRON[307]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 13:17:01 main /USR/SBIN/CRON[314]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 14:17:01 main /USR/SBIN/CRON[317]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 15:17:01 main /USR/SBIN/CRON[320]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 16:17:01 main /USR/SBIN/CRON[323]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 17:17:01 main /USR/SBIN/CRON[326]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 18:17:01 main /USR/SBIN/CRON[329]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 19:17:01 main /USR/SBIN/CRON[332]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 20:17:01 main /USR/SBIN/CRON[335]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 21:17:01 main /USR/SBIN/CRON[338]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 22:17:01 main /USR/SBIN/CRON[341]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 23:17:01 main /USR/SBIN/CRON[344]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 00:17:01 main /USR/SBIN/CRON[347]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 01:17:01 main /USR/SBIN/CRON[350]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 02:17:01 main /USR/SBIN/CRON[353]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 03:17:01 main /USR/SBIN/CRON[356]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 04:17:01 main /USR/SBIN/CRON[359]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 05:17:01 main /USR/SBIN/CRON[362]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 06:17:01 main /USR/SBIN/CRON[365]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 06:25:01 main /USR/SBIN/CRON[368]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ))
Jan 5 06:25:03 main syslog-ng[77]: Configuration reload request received, reloading configuration;
Jan 5 07:17:01 main /USR/SBIN/CRON[424]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 08:17:01 main /USR/SBIN/CRON[427]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 09:17:01 main /USR/SBIN/CRON[430]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 10:17:01 main /USR/SBIN/CRON[433]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 11:17:01 main /USR/SBIN/CRON[436]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 12:17:01 main /USR/SBIN/CRON[439]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 13:17:01 main /USR/SBIN/CRON[442]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 14:17:01 main /USR/SBIN/CRON[445]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 15:17:01 main /USR/SBIN/CRON[452]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 16:17:01 main /USR/SBIN/CRON[455]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 17:17:01 main /USR/SBIN/CRON[458]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 18:17:01 main /USR/SBIN/CRON[461]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 19:17:01 main /USR/SBIN/CRON[464]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)

-----------------------------------
_ _ _
| |___| (_) ___
| / __| | |/ _ \ 
| \__ \ | | (_) |
|_|___/ |_|\___/
|_|

Brought to you by linuxserver.io
-----------------------------------
GID/UID
-----------------------------------
User uid: 99
User gid: 100
-----------------------------------

We are now refreshing packages from apt repositorys, this *may* take a while
MOD Default {} {}
MOD Default {} {}
MOD Default {} {}
MOD Default {} {}
Jan 5 20:38:50 main syslog-ng[78]: syslog-ng starting up; version='3.5.3'
Jan 5 21:17:01 main /USR/SBIN/CRON[177]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 22:17:01 main /USR/SBIN/CRON[180]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 23:17:01 main /USR/SBIN/CRON[183]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 00:17:01 main /USR/SBIN/CRON[186]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 01:17:01 main /USR/SBIN/CRON[189]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 02:17:01 main /USR/SBIN/CRON[192]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 03:17:01 main /USR/SBIN/CRON[195]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 04:17:01 main /USR/SBIN/CRON[198]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 05:17:01 main /USR/SBIN/CRON[201]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 06:17:01 main /USR/SBIN/CRON[204]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 06:25:01 main /USR/SBIN/CRON[207]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ))
Jan 6 06:25:03 main syslog-ng[78]: Configuration reload request received, reloading configuration;
Jan 6 07:17:01 main /USR/SBIN/CRON[264]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 08:17:01 main /USR/SBIN/CRON[267]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 09:17:01 main /USR/SBIN/CRON[270]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 10:17:01 main /USR/SBIN/CRON[273]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 11:17:01 main /USR/SBIN/CRON[276]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 12:17:01 main /USR/SBIN/CRON[279]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 13:17:01 main /USR/SBIN/CRON[282]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 14:17:01 main /USR/SBIN/CRON[285]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 15:17:01 main /USR/SBIN/CRON[292]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 16:17:01 main /USR/SBIN/CRON[295]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 17:17:01 main /USR/SBIN/CRON[298]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 18:17:01 main /USR/SBIN/CRON[301]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 19:17:01 main /USR/SBIN/CRON[304]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 20:17:01 main /USR/SBIN/CRON[307]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 21:17:01 main /USR/SBIN/CRON[310]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 22:17:01 main /USR/SBIN/CRON[314]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)

Share this post


Link to post
Share on other sites

I seem to be having an issue with the installation of the OpenVPN-AS docker. After installing the docker App via CA Plugin I accessed the App GUI.

 

I have nothing downloading and plenty of b/w available to the app. 2.5MB/s to be exact. I logged on using the default user id and password and am stuck on the installation screen which says:

 

"Please click here to continue to download OpenVPN Connect. You will be automatically connected after the installation has finished."

 

It has been about 45 mins and I am still stuck on the installation web page (see screenshot).

 

I have tried reloading the URL and logging in again. Takes me straight back to the installation web page.

 

There is nothing in the log that I can see that is wrong so far. Here it is. Can anyone help?

 

Please enter 'yes' to indicate your agreement [no]: 
Once you provide a few initial configuration settings,
OpenVPN Access Server can be configured by accessing
its Admin Web UI using your Web browser.

Will this be the primary Access Server node?
(enter 'no' to configure as a backup or standby node)
> Press ENTER for default [yes]: 
Please specify the network interface and IP address to be
used by the Admin Web UI:
(1) all interfaces: 0.0.0.0
(2) br0: 192.168.1.2
(3) docker0: 172.17.42.1
(4) virbr0: 192.168.122.1
(5) eth0: 192.168.1.2
(6) vetheda354d: 172.17.42.1
(7) virbr0-nic: 192.168.122.1
Please enter the option number from the list above (1-7).
> Press Enter for default [2]: 
Please specify the port number for the Admin Web UI.
> Press ENTER for default [943]: 
Please specify the TCP port number for the OpenVPN Daemon
> Press ENTER for default [1194]: 
Should client traffic be routed by default through the VPN?
> Press ENTER for default [yes]: 
Should client DNS traffic be routed by default through the VPN?
> Press ENTER for default [yes]: 
Use local authentication via internal DB?
> Press ENTER for default [no]: 
Private subnets detected: ['192.168.1.0/24', '192.168.122.0/24', '172.17.0.0/16']

Should private subnets be accessible to clients by default?
> Press ENTER for default [yes]: 
To initially login to the Admin Web UI, you must use a
username and password that successfully authenticates you
with the host UNIX system (you can later modify the settings
so that RADIUS or LDAP is used for authentication instead).

You can login to the Admin Web UI as "openvpn" or specify
a different user account to use for this purpose.

Do you wish to login to the Admin UI as "openvpn"?
> Press ENTER for default [yes]: 
> Specify the username for an existing user or for the new user account: Note: This user already exists.

> Please specify your OpenVPN-AS license key (or leave blank to specify later): 

Initializing OpenVPN...
Adding new user login...
useradd -s /sbin/nologin "admin"
Writing as configuration file...
Perform sa init...
Wiping any previous userdb...
Creating default profile...
Modifying default profile...
Adding new user to userdb...
Modifying new user as superuser in userdb...
Getting hostname...
Hostname: main
Preparing web certificates...
Getting web user account...
Adding web group account...
Adding web group...
Adjusting license directory ownership...
Initializing confdb...
Generating init scripts...
Generating PAM config...
Generating init scripts auto command...
Starting openvpnas...

NOTE: Your system clock must be correct for OpenVPN Access Server
to perform correctly. Please ensure that your time and date
are correct on this system.

Initial Configuration Complete!

You can now continue configuring OpenVPN Access Server by
directing your Web browser to this URL:

https://192.168.1.2:943/admin
Login as "admin" with the same password used to authenticate
to this UNIX host.

During normal operation, OpenVPN AS can be accessed via these URLs:
Admin UI: https://192.168.1.2:943/admin
Client UI: https://192.168.1.2:943/

See the Release Notes for this release at:
http://www.openvpn.net/access-server/rn/openvpn_as_2_0_20.html

* Stopping openvpnas openvpnas
...done.
MOD Default {u'admin_ui.https.ip_address': u'all'} {u'admin_ui.https.ip_address': 'eth0'}
MOD Default {u'cs.https.ip_address': u'all'} {u'cs.https.ip_address': 'eth0'}
MOD Default {u'vpn.daemon.0.listen.ip_address': u'all'} {u'vpn.daemon.0.listen.ip_address': 'eth0'}
MOD Default {u'vpn.daemon.0.server.ip_address': u'all'} {u'vpn.daemon.0.server.ip_address': 'eth0'}
Jan 3 14:03:00 main syslog-ng[196]: syslog-ng starting up; version='3.5.3'
Jan 3 14:17:01 main /USR/SBIN/CRON[295]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 3 15:17:01 main /USR/SBIN/CRON[298]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 3 16:17:01 main /USR/SBIN/CRON[301]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)

-----------------------------------
_ _ _
| |___| (_) ___
| / __| | |/ _ \ 
| \__ \ | | (_) |
|_|___/ |_|\___/
|_|

Brought to you by linuxserver.io
-----------------------------------
GID/UID
-----------------------------------
User uid: 99
User gid: 100
-----------------------------------

We are now refreshing packages from apt repositorys, this *may* take a while
MOD Default {} {}
MOD Default {} {}
MOD Default {} {}
MOD Default {} {}
Jan 3 17:06:06 main syslog-ng[77]: syslog-ng starting up; version='3.5.3'
Jan 3 17:17:01 main /USR/SBIN/CRON[177]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 3 18:17:01 main /USR/SBIN/CRON[180]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 3 19:17:01 main /USR/SBIN/CRON[183]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 3 20:17:01 main /USR/SBIN/CRON[186]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 3 21:17:01 main /USR/SBIN/CRON[189]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 3 22:17:01 main /USR/SBIN/CRON[192]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 3 23:17:01 main /USR/SBIN/CRON[195]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 00:17:01 main /USR/SBIN/CRON[198]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 01:17:01 main /USR/SBIN/CRON[201]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 02:17:01 main /USR/SBIN/CRON[204]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 03:17:01 main /USR/SBIN/CRON[207]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 04:17:01 main /USR/SBIN/CRON[210]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 05:17:01 main /USR/SBIN/CRON[213]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 06:17:01 main /USR/SBIN/CRON[216]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 06:25:01 main /USR/SBIN/CRON[219]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ))
Jan 4 07:17:01 main /USR/SBIN/CRON[292]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 08:17:01 main /USR/SBIN/CRON[295]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 09:17:01 main /USR/SBIN/CRON[298]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 10:17:01 main /USR/SBIN/CRON[301]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 11:17:01 main /USR/SBIN/CRON[304]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 12:17:01 main /USR/SBIN/CRON[307]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 13:17:01 main /USR/SBIN/CRON[314]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 14:17:01 main /USR/SBIN/CRON[317]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 15:17:01 main /USR/SBIN/CRON[320]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 16:17:01 main /USR/SBIN/CRON[323]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 17:17:01 main /USR/SBIN/CRON[326]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 18:17:01 main /USR/SBIN/CRON[329]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 19:17:01 main /USR/SBIN/CRON[332]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 20:17:01 main /USR/SBIN/CRON[335]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 21:17:01 main /USR/SBIN/CRON[338]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 22:17:01 main /USR/SBIN/CRON[341]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 4 23:17:01 main /USR/SBIN/CRON[344]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 00:17:01 main /USR/SBIN/CRON[347]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 01:17:01 main /USR/SBIN/CRON[350]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 02:17:01 main /USR/SBIN/CRON[353]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 03:17:01 main /USR/SBIN/CRON[356]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 04:17:01 main /USR/SBIN/CRON[359]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 05:17:01 main /USR/SBIN/CRON[362]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 06:17:01 main /USR/SBIN/CRON[365]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 06:25:01 main /USR/SBIN/CRON[368]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ))
Jan 5 06:25:03 main syslog-ng[77]: Configuration reload request received, reloading configuration;
Jan 5 07:17:01 main /USR/SBIN/CRON[424]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 08:17:01 main /USR/SBIN/CRON[427]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 09:17:01 main /USR/SBIN/CRON[430]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 10:17:01 main /USR/SBIN/CRON[433]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 11:17:01 main /USR/SBIN/CRON[436]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 12:17:01 main /USR/SBIN/CRON[439]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 13:17:01 main /USR/SBIN/CRON[442]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 14:17:01 main /USR/SBIN/CRON[445]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 15:17:01 main /USR/SBIN/CRON[452]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 16:17:01 main /USR/SBIN/CRON[455]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 17:17:01 main /USR/SBIN/CRON[458]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 18:17:01 main /USR/SBIN/CRON[461]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 19:17:01 main /USR/SBIN/CRON[464]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)

-----------------------------------
_ _ _
| |___| (_) ___
| / __| | |/ _ \ 
| \__ \ | | (_) |
|_|___/ |_|\___/
|_|

Brought to you by linuxserver.io
-----------------------------------
GID/UID
-----------------------------------
User uid: 99
User gid: 100
-----------------------------------

We are now refreshing packages from apt repositorys, this *may* take a while
MOD Default {} {}
MOD Default {} {}
MOD Default {} {}
MOD Default {} {}
Jan 5 20:38:50 main syslog-ng[78]: syslog-ng starting up; version='3.5.3'
Jan 5 21:17:01 main /USR/SBIN/CRON[177]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 22:17:01 main /USR/SBIN/CRON[180]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 5 23:17:01 main /USR/SBIN/CRON[183]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 00:17:01 main /USR/SBIN/CRON[186]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 01:17:01 main /USR/SBIN/CRON[189]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 02:17:01 main /USR/SBIN/CRON[192]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 03:17:01 main /USR/SBIN/CRON[195]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 04:17:01 main /USR/SBIN/CRON[198]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 05:17:01 main /USR/SBIN/CRON[201]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 06:17:01 main /USR/SBIN/CRON[204]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 06:25:01 main /USR/SBIN/CRON[207]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ))
Jan 6 06:25:03 main syslog-ng[78]: Configuration reload request received, reloading configuration;
Jan 6 07:17:01 main /USR/SBIN/CRON[264]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 08:17:01 main /USR/SBIN/CRON[267]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 09:17:01 main /USR/SBIN/CRON[270]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 10:17:01 main /USR/SBIN/CRON[273]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 11:17:01 main /USR/SBIN/CRON[276]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 12:17:01 main /USR/SBIN/CRON[279]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 13:17:01 main /USR/SBIN/CRON[282]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 14:17:01 main /USR/SBIN/CRON[285]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 15:17:01 main /USR/SBIN/CRON[292]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 16:17:01 main /USR/SBIN/CRON[295]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 17:17:01 main /USR/SBIN/CRON[298]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 18:17:01 main /USR/SBIN/CRON[301]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 19:17:01 main /USR/SBIN/CRON[304]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 20:17:01 main /USR/SBIN/CRON[307]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 21:17:01 main /USR/SBIN/CRON[310]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 6 22:17:01 main /USR/SBIN/CRON[314]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)

 

Go to https://Tower:943/admin

Share this post


Link to post
Share on other sites

 

Thanks, appreciate it.

 

Well, thats just great! After a bit of reading it is working perfectly including access to my LAN IP's and hostnames by default. I don't know if you guys have done any customisations BUT that was much easier and painless in comparison to another Docker I used of the same App a while ago. So Thank you!  :)

Share this post


Link to post
Share on other sites

After installing this docker i cannot get the webui to load in bridge or host mode. i get a page cannot load in my browser.. please advice.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Copyright © 2005-2017 Lime Technology, Inc. unRAID® is a registered trademark of Lime Technology, Inc.