inh

Members
  • Content count

    73
  • Joined

  • Last visited

Community Reputation

0 Neutral

About inh

  • Rank
    Advanced Member

Converted

  • Gender
    Undisclosed
  1. I believe p7zip and unrar packages need to be added as dependencies for nzbget. edit: Also, a stupid blue animated loading cube blocks the plugin settings on unraid 5.0.5 with the Dynamix UI. Not sure if it's because of that or not but I have to manually delete the overlay div with developer tools in order to change any settings.
  2. I think there is some kind of issue with enabling/disabling NZBGet on v5 where it deletes your custom config and replaces it with the stock one.
  3. Thank you for the SSH plugin! Is there any way we could get an option to only allow ssh access for specified users? From reading the .plg it looks like there isn't anywhere I could manually make this change where it would save, hence why I'm asking here.
  4. I do have a disk I could use if I really need to, would you recommend ddrescue over reiserfsck?
  5. I probably should have mentioned that this drive failed sometime during/after reconstructing data on another drive after it also failed, so parity is of no help here
  6. I used rsync to pull the files off and there were a ton that couldn't be copied due to errors. Instinct tells me I should image the drive before it gets worse but I don't have anything big enough to hold the image, so an rsync backup will have to do. Should I start with reiserfsk to try and recover, or ddrescue?
  7. ...and that's what I get for trying to use a computer first thing in the mornin . Can't believe I missed that, thanks.
  8. How do I manually mount a drive? mount -t reiserfs /dev/sda /mnt/diskwhatever doesn't work, I'm sure I'm missing a flag or something...
  9. This is one of my oldest drives, a WD green from ~2011 if I recall correctly. It hasn't red-balled or anything but it does store my most important information. TEST for WDC_WD30EZRX-00MMMB0_WD-WCAWZ1116457 on 201411212005 smartctl 6.2 2013-07-26 r3841 [i686-linux-3.9.11p-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (AF, SATA 6Gb/s) Device Model: WDC WD30EZRX-00MMMB0 Serial Number: WD-WCAWZ1116457 LU WWN Device Id: 5 0014ee 2b0c7e823 Firmware Version: 80.00A80 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Nov 21 20:05:49 2014 HST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 114) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (49800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 478) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1 3 Spin_Up_Time 0x0027 146 144 021 Pre-fail Always - 9658 4 Start_Stop_Count 0x0032 093 093 000 Old_age Always - 7024 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 070 070 000 Old_age Always - 22266 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 202 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 47 193 Load_Cycle_Count 0x0032 149 149 000 Old_age Always - 155215 194 Temperature_Celsius 0x0022 120 108 000 Old_age Always - 32 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 20% 22259 273017280 # 2 Extended offline Interrupted (host reset) 90% 22253 - # 3 Short offline Completed: read failure 10% 22253 273017280 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
  10. i went looking for a menu option to fix permissions, not sure if there is one, I usually do it manually. While I was in the user share settings menu, I noticed that only disk 1 was enabled for user shares, not all like it should be. I changed it, and I'll reboot as soon as a smart self test is done in a couple hours. Maybe that will fix it. Permissions looked good from the brief checking I did via telnet. Edit: Yep, that was the problem. No idea how that menu option got changed, but after telling it to allow user shares on all disks, stopping and then starting the array, all my shares are back.
  11. My media and library folders are on the new disk (disk 7, which is what originally failed) but the shares aren't showing up in the GUI or via samba. No idea what's going on... Edit: After looking through each drive's share, I'm actually missing like 5 shares in the settings, though it seems all the data is there on the drives.
  12. The old drive failed smart tests with read errors, a replacement is on its way from WD. I haven't checked the replacement disk to see if the missing shares folders are present, but they are on the other drives. When I get home I'll take a look and see what's going on with that. I never issued a format command. I put the new drive in after preclearing, set it as parity and parity as the drive that had failed, and unraid starting copying parity and rebuilding the data disk. Once the array started I noticed most but not all of my shares were showing up.
  13. I had a drive fail, so I did the parity swap/upgrade where I took my old parity drive and replaced the failed drive with it, and ordered a new, larger parity drive. All seemed to be well, except I'm missing at least my 'media' and 'library' shares now. Other shares are there and appear to be working fine. Any idea? I rebooted, same issue. Shall I run a parity check? It seems kind of pointless to run one after a drive reconstruction since it's basically the same process ¯\_(?)_/¯ Solution: Make sure user shares are enabled for all disks. Somehow that option got changed on mine... syslog.txt
  14. I found the issue. Just change the line that reads ls -l /dev/disk/by-id | while read a b c d e f g h i j k to ls -l /dev/disk/by-id | while read b c d e f g h i j k I've attached a fixed copy and also added minutes and seconds to the timestamp to make consecutive runs on the same day usable. smarttest.sh.zip
  15. I started a long SMART test on a 3TB WD green drive yesterday. It said it should finish in 483 minutes. I waited that long before checking again, but it hadn't finished. I then tried to run a short test, and it said that another test was in progress with 10% remaining. Now, 14 hours after trying to start a short test, it STILL says 10% remaining. Here is the output when I pull a report: RT Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1 3 Spin_Up_Time 0x0027 147 145 021 Pre-fail Always - 9633 4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3001 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 17804 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 195 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 48 193 Load_Cycle_Count 0x0032 124 124 000 Old_age Always - 229003 194 Temperature_Celsius 0x0022 126 110 000 Old_age Always - 26 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] And the output of trying to start a short self test, which hasn't changed in 14 hours: === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Can't start self-test without aborting current test (10% remaining), add '-t force' option to override, or run 'smartctl -X' to abort test. I'm concerned it got to a really trashed portion of the drive or something and is taking forever to pick through it, or maybe the SMART test just got hung up on something. Any ideas?
Copyright © 2005-2017 Lime Technology, Inc. unRAID® is a registered trademark of Lime Technology, Inc.