Bryce

Members
  • Posts

    11
  • Joined

  • Last visited

Bryce's Achievements

Noob

Noob (1/14)

0

Reputation

  1. Okay I will see about getting that switched over. Thank you for your help!
  2. Okay, are there any options to work around this?
  3. Okay, balance is running and I will look into where the ssd is connected. I am not sure if it is connected directly t the motherboard or through one of the raid cards.
  4. Why would it be dropping so much more dramatically when the cache is actually enabled for the share? There is plenty of space on the cache for the files to go on it first.
  5. I started another larger file transfer with no cache and it has settled at around 50 MB/S.
  6. The speed is much better! It copied the 3.5GB file all the way over at 112MB/S.
  7. Hello, I am having issues copying large video files to my UNRaid shares. I have tried both FTP and SMB. What seems to happen is that the copy runs great (100+ MB/S) for a few gig before it drops down to less than 1 MB/S and stays there. I am running 1TB of SSD cache which has a little under 600GB free and 64GB of RAM. The transfers are over the same network with both machines connected to Ethernet. I have attached the diagnostic data below. Thanks! deepskyserver-diagnostics-20171228-1011.zip
  8. Got it, the appdata is now set to cache only. How do I disable the swap file? I have looked everywhere.
  9. I have a 1TB SSD for a cache drive. Below is the configuration for the appdata folder. I am not sure how to make it "cache only."I installed netdata. Which section of it should I screenshot? There is a ton of information in it.
  10. Hi, I took 3 diagnostics. The "Before Transfer" is exactly as it sounds it is before I started the transfer and the server is running normally. The "During Transfer" is as soon as I saw the file transfer speed drop down and the third "After Cancelling" is after I cancelled the transfer. The after Cancelling was when the server performance is at its worst. deepskyserver-diagnostics-20171104-1519 (1)_DURING TRANFER.zip deepskyserver-diagnostics-20171104-1519_BEFORE TRANSFER.zip deepskyserver-diagnostics-20171104-1519 (2)_AFTER CANCELLING.zip
  11. Hello, I am having an issue with an unRAID pro installation. When copying large files (10GB+) to an SMB Share the transfer moved along quickly (consistently 100MB/s) until the transfer speed drops dramatically. When this happens the entire server becomes extremely slow until the transfer is stopped. Any dockers or VMs are unusable even the unRAID web interface barely or sometimes doesn't load. Thank you for any help! The system specs are below: Model: Dell R710 M/B: Dell Inc. - 00NH4P CPU: Intel® Xeon® CPU X5675 @ 3.07GHz HVM: Enabled IOMMU: Enabled Cache: 192 kB Memory: 64 GB (max. installable capacity 288 GB) Network: bond0: fault-tolerance (active-backup), mtu 1500 eth0: 1000 Mb/s, full duplex, mtu 1500 eth1: 1000 Mb/s, full duplex, mtu 1500 eth2: 1000 Mb/s, full duplex, mtu 1500 eth3: 1000 Mb/s, full duplex, mtu 1500 Kernel: Linux 4.9.19-unRAID x86_64 OpenSSL: 1.0.2k Uptime: 64 days, 18:33:34