cdrsteve

After dealing with this issue for I can't remember how long, I finally got it sorted out. Problem was indeed due to a bad plugin. I booted in Safe Mode, added ".bak" to all installed plugins to rename them, and then rebooted. System rebooted without a problem and I readded my "neccessary" plugins one at a time. My problem was caused by an old version of "Nut" that I failed to uninstall. Installed the now recommended version and all is well! I LOVE Unraid!

I had originally checked my ethernet cabling and switched them out just in case. Also changed to another switch port. Neither made a difference.

Yes and that appears to get me past the original hang point but leads me to a blank black screen at the console. I revently updated from 6.9.2 to 6.11.5 and system had been running with no issues until i got an array Disk 3 (14 TB WD NAS Red) read error. Drive was x'd out by OS. Two subsequent extended SMART runs passed without error so plan was to rebuild back to that drive. Reseated HBA (9305-16i) and replaced SATA cable to Disk 3 branch. Checked PSU rails under load and no issues found. 24 hour Memtest was sat. System hardware will boot various Linux Live distros with no problems and will mount all drives with the exception of Drive 3 as expected. A check of my flash boot drive showed corrupted file system and files. Flash drive would not reformat so i did the procedure for bringing a new flash online transferring the existing config folder from a recent backup but i am afraid it was from 6.92 if that really matters. Anyway, i have not been able to boot system since. I have tried each boot mode with and without hardware attached to no avail. I have a full backup of this server on my other Unraid rig but really would like to recover to avoid moving 40TB of media and restoring my VMs and dockers.

I have the exact same problem. Did OP ever resolve the issue? Anyone have any suggestions on how to resolve or pursue getting past this point in boot process?

Will do!

Thanks for the info.

If still available, what we you charge to get it to 52806?

64GB DDR4 ECC. Hardware setup was originally for FREENAS but then I saw the "light" :).