callummc

Give this a try : Go to unRAID --> Settings --> Community Applications --> General Settings Find an option labelled "Enable additional search results from dockerHub?", and change the drop down to "Yes". Click "Apply" Then click "Done". Go to unRAID --> Apps and locate the search field (top right hand corner of the Apps page) Type "ib docker" (no quotes) and click the search button. You'll be shown a Community Applications (CA) Search Page which states that there was "no matching content found", Inspect the search page closely however, and you'll see a docker icon/logo in the middle of the page, with a link underneath labelled "Get more results from DockerHub". Click the link and a short search will be then be conducted on your behalf, resulting in a list of potential apps from the DockerHub. Select your preferred version, click "Add" and follow the prompts (same as adding a docker from the CA "Apps" section of unRAID) Please note that Ryan Kennedy of ryankennedy.io has not published this app on DockerHub (his only public repository is DeepDream - last updated 2 years ago) so the specific code you likned to will not be shown in the search results. However if I understand your intent correctly, I believe that a search conducted via the community applications "Apps" page will list several dockers for the same "Interactive Brokers" application, essentiually assisting you to achieve the same outcome (getting the IB app running in a docker on unRAID). A casual inspection indicates that the 5th, or perhaps 8th app, in the search results might be worth a quick look. Hope that helps

When you referenced : --restart=unless-exited Is there any chance that you meant? --restart=unless-stopped I attempted your suggestion, however it caused the docker to fail when executing the run command. When I then tried to look the command up online, I couldn't locate it anywhere in the Docker documentation. A little further digging, and I found the "unless-stopped" reference, which sounds quite similar. Not sure if you've made a typo or I've missed something. But as "unless-stopped" does not cause the docker to crash, I've temporarily set it to that for now (docker runs - no problem), and hopefully it fixes the issue described earlier (so far, so good!)

+1 Just switched to a Foxconn Renaissance II X58 Motherboard and I'm getting the same message.

Yup - keyboard it was. Simple trip down to the Supermarket (too late for the IT shop ) and $20 on a elcheapo Logitech USB keyboard and we are off and running...

Update : After some scratching around I've got a feeling that this has something to do with the keyboard that I'm attempting to pass through. It's a Dell USB keyboard with a couple of USB ports on the back. I'm starting to suspect that it might have something to do with the inbuilt USB hub. Does anyone have any experience with anything along these lines?

Hi yall, I'm trying to run up an instance of XBMC in a VM with PCIe passthrough for the video card. I have the following settings configured under the ASROCK BIOS : * IOMMU - Enabled * SVM (AMD-V) - Enabled Which results in nice messages being displayed on the info tab in unRAID (Screen Shot 1) I've got an SSD formatted as BTRFS and mounted using the "Unassigned Devices" plugin, located at /mnt/disks/virtual. On this disk I've created two folders "filesys" and "iso", where the latter folder contains an image of Kodibuntu titled "kodibuntu-14.0-helix_amd64.iso". I've configured a VM under the VMs tab, with the following configuration (Screen Shot 2) : <domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'> <name>VirtualHelix</name> <uuid>a3cf9aa9-f5db-1476-7cae-2659900d1e52</uuid> <description>A virtual machine.</description> <metadata> <vmtemplate name="Custom" icon="ubuntu.png" os="ubuntu"/> </metadata> <memory unit='KiB'>2097152</memory> <currentMemory unit='KiB'>2097152</currentMemory> <memoryBacking> <nosharepages/> <locked/> </memoryBacking> <vcpu placement='static'>2</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='1'/> </cputune> <os> <type arch='x86_64' machine='pc-q35-2.3'>hvm</type> </os> <features> <acpi/> <apic/> </features> <cpu> <topology sockets='1' cores='2' threads='1'/> </cpu> <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/qemu-system-x86_64</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/disks/virtual/filesys/VirtualHelix/vdisk1.img'/> <target dev='hdb' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x05' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/disks/virtual/iso/kodibuntu-14.0-helix_amd64.iso'/> <target dev='hda' bus='sata'/> <readonly/> <boot order='2'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x02' slot='0x03' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x03' function='0x0' multifunction='on'/> </controller> <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'/> <controller type='pci' index='1' model='dmi-to-pci-bridge'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1e' function='0x0'/> </controller> <controller type='pci' index='2' model='pci-bridge'> <address type='pci' domain='0x0000' bus='0x01' slot='0x01' function='0x0'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x02' slot='0x04' function='0x0'/> </controller> <filesystem type='mount' accessmode='passthrough'> <source dir='/mnt/user/test/'/> <target dir='shared'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0'/> </filesystem> <interface type='bridge'> <mac address='52:54:00:c3:c0:43'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/VirtualHelix.org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x02' slot='0x06' function='0x0'/> </memballoon> </devices> <qemu:commandline> <qemu:arg value='-device'/> <qemu:arg value='ioh3420,bus=pcie.0,addr=1c.0,multifunction=on,port=2,chassis=1,id=root.1'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=01:00.0,bus=pcie.0,multifunction=on,x-vga=on'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=01:00.1,bus=pcie.0'/> </qemu:commandline> </domain> When using OVMF, I get a blank screen (no light, nothing...) but keyboard control appears to be removed from the unRAID host. When using SeaBIOS, I get the Kodibuntu install screen appear on the appropriate graphics card, but the USB keyboard does not respond (and appears to have been removed from the host also). Any suggestions? I'd really like to get this VM up an running ASAP

+1

So I've configured all the above in WebGrabPlusPlus.... But I don't seem to get any file generated in the data folder. I have logging set to "on" in WGPP, but it's not generating any logs (there is only one log from last night when it wasn't configured correctly). How do I force WGPP to do it's thing so I can check the log output?

I know it doesn't exactly answer your question, but I thought I would echo the sentiments NAS expressed earlier on RAM economy. My initial rig had a stack of apps and 4GB of RAM, but would grind / stutter a bit under heavy load (it's now running 8GB without a hitch). As a contrast, the new rig I'm toying with runs a Core i5, 16GB RAM and the following docker apps : Plex (w/ Transcoding in Ram) Headless XBMC Sabnzbd SickRage CouchPotato Headphones TVHeadEnd Maraschino Transmission WebGrab++ DUC I'm serving up HD streams to 3-4 devices simultaneously, *while* running PAR2 checks, unZIP/unRAR operations and downloading new media streams @ 2-3Mbps in the background. All of this runs as smooth as butter, using only 3-10% CPU on average. Grab every bit of RAM you can afford early on.... it makes a considerable difference when running a number of apps. You'll always end up adding more apps than you originally intended

I'm having a crack at setting up WebGrabberPlusPlus with TVHeadEnd and a couple of HDHomeRuns. TVHeadEnd is recognising my HDHR and scanning the channels (Major win! - Woohoo!) However, I'm a little lost as far as configuring WebGrabberPlusPlus goes. Has the WebGrab++.config.xml file been pre-configured in some way, or do I need to modify that myself? EG. The "Filename" attribute is currently set to "C:\ProgramData\ServerCare\WebGrab\guide.xml", should I change this to reflect the path I entered on the docker config? (like "/data/config.xml") Or is this automagically managed some other way? I can also see that the package includes the SiteINI pack... do I need to do anything special to configure this for an AU grabber?

Saarg has created on over here : http://lime-technology.com/forum/index.php?topic=37671.0 I'm in the middle of having a crack at setting up my HDHomeRun right now. Give it a try and let him know how you went.

I imagine it should work without a hitch. A day or so ago, I used your docker config file and changed the repository name from needo/sickrage to adamrbell/sickrage and that worked for me. If you've mirrored the code change Adam made, it should work for everyone else too. Can anyone confirm? (I'm away from my install at the moment or I'd try it myself)

Yes - I discovered that you have the drivers installed after checking your docker file in github. Your question was on the right path. As the HDHomeRun tuner is a network device, it connects on a specific port (although I'm not sure exactly which one). I switched the docker app to "host" mode, which then enabled it to recognise the HDHomeRun tuners I should probably work out which port it connects on and switch it back to bridge mode at some point. Right now I'm busy trying to work out the WebGrab++ config to see if I can get TVHeadEnd up and running For the moment, I can confirm it recognises the HDHomeRun tuners and enables a channel / mux scan to be completed. I'll post more details once I have it all up and running

I've PM'd needo

I think this addresses the issue : https://github.com/adamrbell/sickrage It seems that SickRage have a new repository on GitHub.