Server1Alpha

Ah yes forgot to mention, the server was acting perfectly for around a year or so with these specs, also I did try updating the bios to the most recent version which had no effect, the ram is running at whatever is default, I'll go look through the bios for that other setting and also adjust the ram if need be. Edit: also Fix Common Problems put out a new error: Your server has detected hardware errors. You should install mcelog via the NerdPack plugin, post your diagnostics and ask for assistance on the unRaid forums. The output of mcelog (if installed) has been logged. I've went ahead and installed it and if adjusting the bios settings doesn't fix anything I'll post the new logs Edit 2: Ram speed was below recommended max, 2 sticks at 2133 mhz, I've switched the power supply idle to typical

Tldr: system seems to abruptly crash around every 24 ish hours. This started happening a few weeks before quarantine, I let it happen a couple times before I left it off until a couple days ago when I moved its location and have time and ability to actively work on it. It seems to happen around 24 hours, I think its lasted up to 48 ish before. It becomes unreachable via the web interface and also locally. This latest time it actually managed to reboot, so it may be different this time? The only major difference to me was I was running tailing syslog locally, but I don't know how that would make it reboot instead of just crash or hang or whatever it does. Did a memory test which showed no problems. replaced two hard drives since issues started since one of the two had started making loud clicking noises and since they were both sourced from the same place at the same tike some years ago, and I needed more space anyways (and hit the limit for sata expansion) I swapped them for 2 different drives from 2 different places. Specs: Ryzen 7 1700x, Gigabyte B450 AORUS M 32 GB Ram Unraid 6.8.3 Plugins: Community Applications Fix Common Problems Dynamix System Statistics/Ssd Trim ProFTPd Docker: Well I had a bunch, but after the latest crash, all but Sonarr are now orphan images, but the other ones: Jacket, plex, ombi, radar, duckdns, rtorrent, deluge, mariadb. tower-diagnostics-20200530-2041.zip

Using vnc remote on latest version of ubuntu (afaik, I'll get into why I don't know exactly later) just doesn't work. It seems to be based on what day I use it. Some days it works absolutely fine, and some days it just refuses to work. Today is another one of those non working days. The screen won't update properly, meaning that something has to actually update in a major way for that one tiuny portion of the screen to finally render. The mouse is COMPLETELY off, where I have to click absolutely randomly and hope that eventually I'll click remotely close to what I actually want to get to. I'm stuck using ONLY the vnc remote browser viewer since anything else I throw at it gets immediately refused. I tried on chrome, firefox, and I wanted to try on edge evene but HAHA bug surprise it is even worse to try to use on edge since I can't even see where the mouse goes at all! Scaling is terrible even when it works, I used to have to go fullscreen and it would line up. If it was locally downsized the interactivity wouldn't change from being full size (fun guessing games again) What frustrates me most is that this was working FINE just a few days ago and was working great and very consistently weeks before that. But every so often it'll just break and go into this ridiculous set of issues. I have to force shutdown the vm to even get the screen to update at all sometimes. It seems to be a bigger issue when I log in. I haven't restarted the unraid server itself. I am running the unraid 6.4.0 (these vnc remote issues have been going since whenever I first got unraid maybe a year or two ago, but at first everything was WAY worse where it would lag and even if I pressed a key as quick as I could it would lag and send a really long press which made it hard to do or type anything) Trying to reboot the vm manager as I write this but it looks like it may have just up and died. Edit: deleted libvirt.img, so now the vm manager has started again, but of course my vm has now been deleted. Edit: I mean I have the vdisk still but of course I can't seem to recover it.... put it as SeaBios as I think I had it before and it's just a big black screen Edit 2: We're back. It was actually working I just couldn't tell because the screen wouldn't update so the whole thing stayed black until I dragged stuff around screen to force it to try to update. SOLVED: Had to go into advanced mode and switch the vnc graphics driver from the default "best" to another one.

It's been doing the same thing. Port 80 seems to not be blocked by my isp currently.

Changed it to internal port 9293 on router, and host port 9293. Pinging the domain pings to my ip, the request times out. Edit: There is a very small chance that my isp has started to block port 80, I will go and double check on that tomorrow.

No idea what I am doing wrong I had this working perfectly fine before the update really easily, hate bothering others with issues like this because it's usually something stupid.

Both were port forwarded before, so I kept port 443 forwarded, and changed the port to port 80 external, to 81 internal, to unraid's ip address, and container port is 80 while host port is 81. I also changed the top url to (mydomain).duckdns.org and the subdomain to www. as was suggested to me

As far as I can tell the settings are correct based off of what I've seen recently in this thread, and it's about the same as when it was working before the 6.4 update. Last week I got a week long ban because I kept trying to fix this and tried 5 times in an hour so I know my server is reaching out fine. Port forwarded correctly too. Unraid is not running on port 80 or 443 so not sure if that might be causing the issue since that's the only thing I can think of that is different, especially since apparently the httpval thing is no longer required from what I can infer, although really tired right now so I may just be really stupid. Already tried 4 times recently so I'm gonna have to wait to try again but figured I might be able to get some input while I wait. Thanks

Recently upgraded to 6.4, everything worked fine, had an issue with the letsencrypt and nginx, so I turned off the new built in encryption, messed up and had to ftp in to edit config to reenable access (whoops) and it was around that time I started having issues with unraids internet connection. It's just with unfair and the docker, as the vm that's running on it works perfectly fine. It's not like the internet doesn't work at all, it just goes out for up to 10 seconds every 40 to to 50 seconds or so. Tried rebooting and the fix common errors app, but no luck so far. I've had a static ip since I first set everything up, but I only reserved the ip after this issue started occuring. I am not in the same location as my server currently and have to use the ovpn installed on it to connect but as it is installed on it it takes a bit to move around and accomplish anything with the internet constantly dropping. Docker: Binhex-vpn Couchpotato Duck dns Jackett Jdownloader2 Let's encrypt Ombi Openvpn-as Organizr* PlexMediaServer PlexPy* PlexRequests* Sickrage* Sonarr *currently not using these, haven't for a while Plugins: Community application's Fix common problems Dynamix ssd trim Pre clear disks Solved: I managed to get a connection to it long enough to edit the network,cfg file to change the static ip addess to a different number. Seems as though unraid somehow was running two different connections on one ip. After switiching it to .74, there's still a device connected as .7, not sure what it is.

Not sure what I changed, because now I can't seem to be able to start the service anymore, checking logs is this: sudo: openvpn: command not found It worked for a bit,but stopped using it for a while, tried using it again and as you can tell it's not working. Wonder if some update maybe broke the installation. Tried removing it from plugins panel, and reading it but seems to give same issue. Thanks for any help in advance!

I'm also having an issue with getting this up and running, hopefully my reading into the issue lead me to the wrong conclusion. /steamcmd/steamcmd.sh: line 29: /steamcmd/linux32/steamcmd: cannot execute binary file: Exec format error Either I'm gonna be stuck with running it on a vm, or I'm doing something stupid here. Any help is appreciated, thanks!