turkishmonky

I purchased two Rosewill RX307-PU3-35B disk enclosures. I can add one to the array, however, when i select the second from the dropdown, it will not select it. Instead, I get the following error in my syslog: Error: disk3: 111122223333-0:0 already assigned Both enclosures have different sized disks in them, and work if i try only one at a time. Any thoughts?

Alright, I have it working, it was a driver issue. My eventual solution was to use a USB displaylink to get past the login screen. 1. I first installed ubuntu with VNC and installed the displaylink driver and the _legacy_ 304 driver (340 is supposed to be supported, but was just showing black) 2. I then switched the VM to include the displaylink device, as well as both Quadro GCs. 3. The Quadro will not show anything until it gets to the GUI - no bios text, no console. I used the displaylink monitor to enter the volume password and then once the select a user screen shows up my GC starts working. 4. Eventually I just memorized the keystrokes to get to the login screen, and it's been working ever since. So overall i'm not sure if there's something else i'm missing on the VM since the GC works perfectly fine on the host system, I'm still wondering if the additional NF200 bridges would make it more stable, or what, but i have a reliably booting machine now. Thanks for your help!

Alright, i tried setting up seabios, the first 2 times i restarted the VM, nothing happened. The third time, i got a mangled display with a message: "Failed to start the x server (your graphical interface). It is likely that it is not set up correctly. Would you like to view the X server output to disclose the problem?" However, it shut off the display afterwards. Subsequent restarts have had no effect. (I'm using displayport, which are the only ports available on the quadro).

Hello, I've come across a problem that I've tried to fix through scouring old forum posts, but unfortunately I must still be missing something. I'm trying to pass my Quadro card into an Ubuntu vm, and while it gives the appearance of working (no errors I've noticed in the logs), the screen remains black the whole time. I have the ACS override enabled, and have tried both using VNC to preinstall as well as starting fresh from the Quadro. Bus 0x12 seems to be the actual display adapter, but bus 0x11 is also showing up for the card in the GPU dropdown, so i added it as a second GPU. I've had a suspicion I need to pass through 0x10 and 0x0f as well but am not sure how (since i'm pretty new to unraid I'm not sure if that's an actual issue or not either) Any help or pointers would be really appreciated! XML Configuration: <domain type='kvm'> <name>Ubuntu</name> <uuid>d34f1e2b-4d7a-0bb6-b33b-7ba84602ce64</uuid> <metadata> <vmtemplate xmlns="unraid" name="Ubuntu" icon="ubuntu.png" os="ubuntu"/> </metadata> <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>4</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='1'/> <vcpupin vcpu='2' cpuset='2'/> <vcpupin vcpu='3' cpuset='3'/> </cputune> <os> <type arch='x86_64' machine='pc-q35-2.7'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/d34f1e2b-4d7a-0bb6-b33b-7ba84602ce64_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> </features> <cpu mode='host-passthrough'> <topology sockets='1' cores='2' threads='2'/> </cpu> <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/Ubuntu/vdisk1.img'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x03' function='0x0'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'/> <controller type='pci' index='1' model='dmi-to-pci-bridge'> <model name='i82801b11-bridge'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x1e' function='0x0'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x02' slot='0x02' function='0x0'/> </controller> <controller type='pci' index='2' model='pci-bridge'> <model name='pci-bridge'/> <target chassisNr='2'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:64:bc:4b'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x12' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x02' slot='0x04' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x11' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x02' slot='0x05' function='0x0'/> </hostdev> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x02' slot='0x06' function='0x0'/> </memballoon> </devices> </domain> IOMMU Groups (with ACS Override): IOMMU group 0 [8086:3406] 00:00.0 Host bridge: Intel Corporation 5520 I/O Hub to ESI Port (rev 13) IOMMU group 1 [8086:3408] 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) IOMMU group 2 [8086:340a] 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) IOMMU group 3 [8086:340e] 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) IOMMU group 4 [8086:3425] 00:10.0 PIC: Intel Corporation 7500/5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) [8086:3426] 00:10.1 PIC: Intel Corporation 7500/5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) IOMMU group 5 [8086:3427] 00:11.0 PIC: Intel Corporation 7500/5520/5500 Physical and Link Layer Registers Port 1 (rev 13) [8086:3428] 00:11.1 PIC: Intel Corporation 7500/5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) IOMMU group 6 [8086:342e] 00:14.0 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers (rev 13) [8086:3422] 00:14.1 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) [8086:3423] 00:14.2 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) IOMMU group 7 [8086:342f] 00:15.0 PIC: Intel Corporation 7500/5520/5500/X58 Trusted Execution Technology Registers (rev 13) IOMMU group 8 [8086:3a37] 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a38] 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a39] 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a3c] 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 IOMMU group 9 [8086:3a3e] 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller IOMMU group 10 [8086:3a40] 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 IOMMU group 11 [8086:3a4a] 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 IOMMU group 12 [8086:3a34] 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a35] 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a36] 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a3a] 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 IOMMU group 13 [8086:244e] 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) [11c1:5811] 37:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 70) IOMMU group 14 [8086:3a16] 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:2822] 00:1f.2 RAID bus controller: Intel Corporation SATA Controller [RAID mode] IOMMU group 15 [10de:05be] 0f:00.0 PCI bridge: NVIDIA Corporation NF200 PCIe 2.0 switch for Quadro Plex S4 / Tesla S870 / Tesla S1070 / Tesla S2050 (rev a3) IOMMU group 16 [10de:05be] 10:00.0 PCI bridge: NVIDIA Corporation NF200 PCIe 2.0 switch for Quadro Plex S4 / Tesla S870 / Tesla S1070 / Tesla S2050 (rev a3) IOMMU group 17 [10de:05be] 10:02.0 PCI bridge: NVIDIA Corporation NF200 PCIe 2.0 switch for Quadro Plex S4 / Tesla S870 / Tesla S1070 / Tesla S2050 (rev a3) IOMMU group 18 [10de:06fa] 11:00.0 3D controller: NVIDIA Corporation G98 [Quadro NVS 450] (rev a1) IOMMU group 19 [10de:06fa] 12:00.0 VGA compatible controller: NVIDIA Corporation G98 [Quadro NVS 450] (rev a1) IOMMU group 20 [10de:0a65] 28:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2) [10de:0be3] 28:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) IOMMU group 21 [1912:0014] 1c:00.0 USB controller: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller (rev 03) IOMMU group 22 [14e4:1684] 01:00.0 Ethernet controller: Broadcom Limited NetXtreme BCM5764M Gigabit Ethernet PCIe (rev 10) IOMMU group 23 [8086:2c70] 3f:00.0 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers (rev 02) [8086:2d81] 3f:00.1 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder (rev 02) IOMMU group 24 [8086:2d90] 3f:02.0 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 0 (rev 02) [8086:2d91] 3f:02.1 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 0 (rev 02) [8086:2d92] 3f:02.2 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 0 (rev 02) [8086:2d93] 3f:02.3 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 1 (rev 02) [8086:2d94] 3f:02.4 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 1 (rev 02) [8086:2d95] 3f:02.5 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 1 (rev 02) IOMMU group 25 [8086:2d98] 3f:03.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers (rev 02) [8086:2d99] 3f:03.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder (rev 02) [8086:2d9a] 3f:03.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers (rev 02) [8086:2d9c] 3f:03.4 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers (rev 02) IOMMU group 26 [8086:2da0] 3f:04.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control (rev 02) [8086:2da1] 3f:04.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address (rev 02) [8086:2da2] 3f:04.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank (rev 02) [8086:2da3] 3f:04.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control (rev 02) IOMMU group 27 [8086:2da8] 3f:05.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control (rev 02) [8086:2da9] 3f:05.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address (rev 02) [8086:2daa] 3f:05.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank (rev 02) [8086:2dab] 3f:05.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control (rev 02) IOMMU group 28 [8086:2db0] 3f:06.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control (rev 02) [8086:2db1] 3f:06.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address (rev 02) [8086:2db2] 3f:06.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank (rev 02) [8086:2db3] 3f:06.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control (rev 02) VM Log: 2017-05-06 17:00:04.277+0000: starting up libvirt version: 2.4.0, qemu version: 2.7.1, hostname: Tower LC_ALL=C PATH=/bin:/sbin:/usr/bin:/usr/sbin HOME=/ QEMU_AUDIO_DRV=none /usr/local/sbin/qemu -name guest=Ubuntu,debug-threads=on -S -object secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-14-Ubuntu/master-key.aes -machine pc-q35-2.7,accel=kvm,usb=off,dump-guest-core=off,mem-merge=off -cpu host -drive file=/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd,if=pflash,format=raw,unit=0,readonly=on -drive file=/etc/libvirt/qemu/nvram/d34f1e2b-4d7a-0bb6-b33b-7ba84602ce64_VARS-pure-efi.fd,if=pflash,format=raw,unit=1 -m 4096 -realtime mlock=off -smp 4,sockets=1,cores=2,threads=2 -uuid d34f1e2b-4d7a-0bb6-b33b-7ba84602ce64 -display none -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-14-Ubuntu/monitor.sock,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc,driftfix=slew -global kvm-pit.lost_tick_policy=discard -no-hpet -no-shutdown -boot strict=on -device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1eannel0,name=org.qemu.guest_agent.0 -device vfio-pci,host=12:00.0,id=hostdev0,bus=pci.2,addr=0x4 -device vfio-pci,host=11:00.0,id=hostdev1,bus=pci.2,addr=0x5 -device virtio-balloon-pci,id=balloon0,bus=pci.2,addr=0x6 -msg timestamp=on Domain id=14 is tainted: high-privileges Domain id=14 is tainted: host-cpu char device redirected to /dev/pts/0 (label charserial0)