ximian

I had issues with this workaround for AMD, I could not get Plex to work at all the minute I added the device. I found a thread that mentionned using this instead: /dev/dri/renderD128:/dev/dri/renderD128 This worked number one and I can easily HW transcode 4/5 videos. I have an AMD Ryzen 9 7900X. https://medium.com/@liviustefanesq/leveraging-amd-gpu-power-on-unraid-for-plex-media-server-dd500d64f70b

Hi there Stagenet. I am intersted in knowing how you got the transcoding going? I have installed RadeonTop, added the /dev/dri:/dev/dri in the device (I am running plex as a docker). I start something it is just spinning. Seems to be an issue with the transcoding.

Well now... just for good measure I rebooted the server and now the mover is working .. Slap me for not trying that first (although, in my defense I thought I had). Closing this as resolved, but suprised that a creation of a pool needs a server reboot to become active.

Yes, the pool CFG Files. OK will stop the array and delete the files and recreate the caches ... see if this helps.

Tried it and still same results. Wonder if I delete the cache.cfg file and then redo the exercise if this would correct the issue.

Bump ... no one ?

han-solo-diagnostics-20230929-1150.zip

han-solo-diagnostics-20230929-1150.zip

I trying to activate mover and I am getting this message: move: mover: array devices not mounted However raid is up, cache pool is available. One cache is receiving files the other is not? Any insight would be appreciated.

I too have been experiencing this issue lately. I see that possible root cause (from different posts in the forums) would be cable, the SAS card itself or the hard drive.... If the Card was the issue would we not see this error randomly on different drives or even or more than one drive? Cable I can understand because of vibration and some reseating may need to be done. If it is the quality of the cable the issue, what does the forum recommend for quality SAS cables ? Thanks. lsi 9211-8i is the card I am presently using.

I am looking for suggestions on the best positioning on the PCIe cards and a question about Pool devices vs Unassigned drives for my NVMe. Here are some specs to help the discussion UnRaid: 6.12.4 Board : ROG CROSSHAIR VII HERO CPU : AMD Ryzen 7 2700X Eight-Core @ 3700 MHz PCIe Slot 1 (PCIe 3.0 x16/x8) -- Graphics card for Plex - NVIDIA GeForce GTX 1650 SUPER PCIe Slot 3 (PCIe 3.0 x8/x4) -- 10GB Broadcom card PCIe Slot 5 (PCIe 2.0 x4/x3) -- SAS9211-8I 8PORT NVMe M.2_1(Socket 3) Question 1 For the PCIe slots : are there changes in positioning I should consider. It is my understanding from the documentation of the MB that M2 slots will be at PCIE3.0 X4 because of the AMD 2nd gen and therefore occupying all 3 slots does not relatively impact performance. Am I right in my thinking ? Question 2 At the moment Pool devices is 2 SSD 1TB and I have 1 NVMe in the unassigned devices. I have room to add another SSD to modify my shares accordingly. 2 SSD 1TB -- Should be used for appdata (Dockers) -Primary storage - Cache The NVMe -- Used for VM Disks. The new SSD to be used for downloads. The question I have -- Should I move the NVMe to Pool devices or leave under Unassigned devices? Thanks NB Server Plex, file share and dockers. other option is to buy a new board MSI PRO B550M-VC WiFi ProSeries Motherboard With 4 pcie slots

Found the offending plugin. It is the GPU statistics plugin. I have removed it. Corrected the display issue. Reinstalled problem was back. So temporarily I have decided to remove it.

Confirmed that safe mode, display was alright. Now to find offending plugin !!

Just an fyi... if this is not the place then let me know. Display issues with this release. I have attached a few screenshots to demonstrate.

Thank you so much for this ! Definitely and least expensive to get a MACos box going! I followed all the instructions in the Video and start off the VM. Unfortunately all I get is the APPLE ICON ... and then that is it. Left it on for the night .. still nothing. Anyone has an idea what the issue may be? NB: this happens for all versions available in macinabox. Thank you.