Johan71

Same here

Did that and nog it works pefect, tnx

Today nothing works anymore, does anyone have the same problem? I feel like I've tried everything but I'm getting nowhere Aug 17, 2022 21:28:10.000 [0x151e2c069b38] Error — [Req#3cc] [Transcoder] [eac3_eae @ 0x14e96271af40] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-5a3b6c90-a96d-4e00-b35e-0edacb0caf0d/EasyAudioEncoder/Convert to WAV (to 8ch or less)/479eiah32n9dbfsz8iccrrh4_424-0-16.wav' Aug 17, 2022 21:28:10.000 [0x151e2c0afb38] Error — [Req#3cf] [Transcoder] [eac3_eae @ 0x14e96271af40] error reading output Aug 17, 2022 21:28:10.000 [0x151e2c610b38] Error — [Req#3d2] [Transcoder] Error while decoding stream #0:1: I/O error Aug 17, 2022 21:28:13.000 [0x151e2c069b38] Error — [Req#3d5] [Transcoder] [eac3_eae @ 0x14e96271af40] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-5a3b6c90-a96d-4e00-b35e-0edacb0caf0d/EasyAudioEncoder/Convert to WAV (to 8ch or less)/479eiah32n9dbfsz8iccrrh4_424-0-17.wav' Aug 17, 2022 21:28:13.000 [0x151e2c0afb38] Error — [Req#3dd] [Transcoder] [eac3_eae @ 0x14e96271af40] error reading output Aug 17, 2022 21:28:13.000 [0x151e2c610b38] Error — [Req#3e1] [Transcoder] Error while decoding stream #0:1: I/O error Aug 17, 2022 21:28:16.000 [0x151e2c069b38] Error — [Req#3e4] [Transcoder] [eac3_eae @ 0x14e96271af40] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-5a3b6c90-a96d-4e00-b35e-0edacb0caf0d/EasyAudioEncoder/Convert to WAV (to 8ch or less)/479eiah32n9dbfsz8iccrrh4_424-0-18.wav' Aug 17, 2022 21:28:16.000 [0x151e2c0afb38] Error — [Req#3e6] [Transcoder] [eac3_eae @ 0x14e96271af40] error reading output Aug 17, 2022 21:28:16.000 [0x151e2c610b38] Error — [Req#3ea] [Transcoder] Error while decoding stream #0:1: I/O error Aug 17, 2022 21:28:19.000 [0x151e2c069b38] Error — [Req#3ed] [Transcoder] [eac3_eae @ 0x14e96271af40] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-5a3b6c90-a96d-4e00-b35e-0edacb0caf0d/EasyAudioEncoder/Convert to WAV (to 8ch or less)/479eiah32n9dbfsz8iccrrh4_424-0-19.wav' Aug 17, 2022 21:28:19.000 [0x151e2c0afb38] Error — [Req#3ef] [Transcoder] [eac3_eae @ 0x14e96271af40] error reading output Aug 17, 2022 21:28:19.000 [0x151e2c610b38] Error — [Req#3f3] [Transcoder] Error while decoding stream #0:1: I/O error Aug 17, 2022 21:28:22.000 [0x151e2c069b38] Error — [Req#3f6] [Transcoder] [eac3_eae @ 0x14e96271af40] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-5a3b6c90-a96d-4e00-b35e-0edacb0caf0d/EasyAudioEncoder/Convert to WAV (to 8ch or less)/479eiah32n9dbfsz8iccrrh4_424-0-20.wav' Aug 17, 2022 21:28:22.000 [0x151e2c0afb38] Error — [Req#3f8] [Transcoder] [eac3_eae @ 0x14e96271af40] error reading output Aug 17, 2022 21:28:22.000 [0x151e2c610b38] Error — [Req#3fc] [Transcoder] Error while decoding stream #0:1: I/O error Aug 17, 2022 21:28:25.000 [0x151e2c610b38] Error — [Req#3ff] [Transcoder] [eac3_eae @ 0x14e96271af40] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-5a3b6c90-a96d-4e00-b35e-0edacb0caf0d/EasyAudioEncoder/Convert to WAV (to 8ch or less)/479eiah32n9dbfsz8iccrrh4_424-0-21.wav' Aug 17, 2022 21:28:25.000 [0x151e2c0afb38] Error — [Req#424] [Transcoder] [eac3_eae @ 0x14e96271af40] error reading output Aug 17, 2022 21:28:25.000 [0x151e2c069b38] Error — [Req#427] [Transcoder] Error while decoding stream #0:1: I/O error Aug 17, 2022 21:28:28.000 [0x151e2c610b38] Error — [Req#42a] [Transcoder] [eac3_eae @ 0x14e96271af40] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-5a3b6c90-a96d-4e00-b35e-0edacb0caf0d/EasyAudioEncoder/Convert to WAV (to 8ch or less)/479eiah32n9dbfsz8iccrrh4_424-0-22.wav' Aug 17, 2022 21:28:28.000 [0x151e2c0afb38] Error — [Req#42f] [Transcoder] [eac3_eae @ 0x14e96271af40] error reading output Aug 17, 2022 21:28:28.000 [0x151e2c069b38] Error — [Req#432] [Transcoder] Error while decoding stream #0:1: I/O error

You're an angel, thank you very much

Unfortunately not so easy to do according to spaceinvade's video as the field Nvidia Visible Devices: no longer exists. Unfortunately, I do not know what to fill in anywhere under Key: Value: Default Value:

Tried to restart my plex-server tonight but it tries to upgrade but nothing happens, what should/can I do?

Tnx m8 all is solved now.

Yes it works but now i have to find out witch temp i what. in0: 1.07 V (min = +0.00 V, max = +1.74 V) in1: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM in2: 3.42 V (min = +0.00 V, max = +0.00 V) ALARM in3: 3.38 V (min = +0.00 V, max = +0.00 V) ALARM in4: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM in5: 152.00 mV (min = +0.00 V, max = +0.00 V) ALARM in6: 768.00 mV (min = +0.00 V, max = +0.00 V) ALARM in7: 3.42 V (min = +0.00 V, max = +0.00 V) ALARM in8: 3.28 V (min = +0.00 V, max = +0.00 V) ALARM in9: 1.85 V (min = +0.00 V, max = +0.00 V) ALARM in10: 0.00 V (min = +0.00 V, max = +0.00 V) in11: 688.00 mV (min = +0.00 V, max = +0.00 V) ALARM in12: 1.03 V (min = +0.00 V, max = +0.00 V) ALARM in13: 608.00 mV (min = +0.00 V, max = +0.00 V) ALARM in14: 1.53 V (min = +0.00 V, max = +0.00 V) ALARM fan1: 0 RPM (min = 0 RPM) fan2: 1560 RPM (min = 0 RPM) fan3: 884 RPM (min = 0 RPM) fan4: 852 RPM (min = 0 RPM) fan5: 750 RPM (min = 0 RPM) SYSTIN: +39.0°C (high = +80.0°C, hyst = +75.0°C) sensor = CPU diode CPUTIN: +40.0°C (high = +115.0°C, hyst = +90.0°C) sensor = thermistor AUXTIN0: +39.0°C (high = +115.0°C, hyst = +90.0°C) sensor = thermistor AUXTIN1: -128.0°C sensor = thermistor AUXTIN2: +44.0°C sensor = thermistor AUXTIN3: -2.0°C sensor = thermistor SMBUSMASTER 0: +51.5°C PCH_CHIP_CPU_MAX_TEMP: +0.0°C PCH_CHIP_TEMP: +0.0°C PCH_CPU_TEMP: +0.0°C intrusion0: ALARM intrusion1: ALARM beep_enable: disabled

Yes and i got I don't really know what to do after I do. root@Tower:~# sensors-detect # sensors-detect version 3.6.0 # System: Micro-Star International Co., Ltd. MS-7B89 [1.0] # Board: Micro-Star International Co., Ltd. B450M MORTAR MAX (MS-7B89) # Kernel: 4.19.88-Unraid x86_64 # Processor: AMD Ryzen 5 3600 6-Core Processor (23/113/0) This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 16h thermal sensors... No AMD Family 17h thermal sensors... Success! (driver `k10temp') AMD Family 15h power sensors... No AMD Family 16h power sensors... No Hygon Family 18h thermal sensors... No Intel digital thermal sensor... No Intel AMB FB-DIMM thermal sensor... No Intel 5500/5520/X58 thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes Found `Nuvoton NCT6797D Super IO Sensors' Success! (address 0xa20, driver `nct6775') Some systems (mainly servers) implement IPMI, a set of common interfaces through which system health data may be retrieved, amongst other things. We first try to get the information from SMBIOS. If we don't find it there, we have to read from arbitrary I/O ports to probe for such interfaces. This is normally safe. Do you want to scan for IPMI interfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): Using driver `i2c-piix4' for device 0000:00:14.0: AMD KERNCZ SMBus Module i2c-dev loaded successfully. Next adapter: SMBus PIIX4 adapter port 0 at 0b00 (i2c-0) Do you want to scan it? (yes/NO/selectively): Next adapter: SMBus PIIX4 adapter port 2 at 0b00 (i2c-1) Do you want to scan it? (yes/NO/selectively): Next adapter: SMBus PIIX4 adapter port 3 at 0b00 (i2c-2) Do you want to scan it? (yes/NO/selectively): Next adapter: SMBus PIIX4 adapter port 4 at 0b00 (i2c-3) Do you want to scan it? (yes/NO/selectively): Next adapter: NVIDIA i2c adapter 0 at 26:00.0 (i2c-4) Do you want to scan it? (yes/NO/selectively): Next adapter: NVIDIA i2c adapter 1 at 26:00.0 (i2c-5) Do you want to scan it? (yes/NO/selectively): Next adapter: NVIDIA i2c adapter 6 at 26:00.0 (i2c-6) Do you want to scan it? (yes/NO/selectively): Next adapter: NVIDIA i2c adapter 8 at 26:00.0 (i2c-7) Do you want to scan it? (yes/NO/selectively): Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `k10temp': * Chip `AMD Family 17h thermal sensors' (confidence: 9) Driver `nct6775': * ISA bus, address 0xa20 Chip `Nuvoton NCT6797D Super IO Sensors' (confidence: 9) Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): To load everything that is needed, add this to one of the system initialization scripts (e.g. /etc/rc.d/rc.local): #----cut here---- # Chip drivers modprobe k10temp modprobe nct6775 /usr/bin/sensors -s #----cut here---- You really should try these commands right now to make sure everything is working properly. Monitoring programs won't work until the needed modules are loaded. Unloading i2c-dev... OK

Hello I changed the hardware a few days ago and after that my Dynamix System Temperature pluign no longer works. I've searched the forum but can't solve my problem I have run sensors-detect in cli but get this problem. Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): To load everything that is needed, add this to one of the system initialization scripts (e.g. /etc/rc.d/rc.local): #----cut here---- # Chip drivers modprobe k10temp modprobe nct6775 /usr/bin/sensors -s #----cut here---- You really should try these commands right now to make sure everything is working properly. Monitoring programs won't work until the needed modules are loaded. root @ Tower: ~ # modprobe k10temp root @ Tower: ~ # modprobe nct6775 modprobe: ERROR: could not insert 'nct6775': No such device root @ Tower: ~ # / usr / bin / sensors -s No sensors found! Make sure you have loaded all the kernel drivers you need. Try sensors-detect to find out which these are. root @ Tower: ~ # My hardware is M/B: Micro-Star International Co., Ltd. B450M MORTAR MAX (MS-7B89) Version 1.0 - s/n: J916249308 BIOS: American Megatrends Inc. Version 2.50. Dated: 11/07/2019 CPU: AMD Ryzen 5 3600 6-Core @ 3600 MHz

Very smooth and easy to install. A good example today is when I have built myself a new server and prepared myself for a lot of jobs after I moved my hard drives. Judging by my surprise when everything started up just like my old server, I just say unraid every day of the week it is absolutely superb. What I want to see as a feature in 2020 is a simple connection to dropbox or similar so you can take simple backups to the cloud.

Trying to update my containers but it does not download anything and after a check you can update them no one without results. What can I do? Even got this Tower nginx: 2019/08/30 16:48:07 [error] problem tower-diagnostics-20190830-1453.zip

And for me with Plex, thanks all.

How do you do when you edit the file? Do you take out the memory o put it in another computer or shut down your server first then edit the file or do it from cli?

Excuse my ignorance I restart the server so everything went well.