TheFullTimer

Members
  • Posts

    44
  • Joined

  • Last visited

Recent Profile Visitors

1226 profile views

TheFullTimer's Achievements

Rookie

Rookie (2/14)

3

Reputation

  1. Just wanted to pop in here. I have a file named mounts which was created today in the `/mnt` directory around the time I updated Unassigned Devices. Would this be related to the two updates today (02-02-2024 EST)? If so, keep or delete?
  2. Well I double checked and realized I had followed the older guide to implementing the i915 transcoding. So I've switched to the newer method and if that fails I'll be switching back to blacklisting i915 and using CPU transcoding to test. Additionally, I checked and Asus has updated the Bios on this board like 3 times since purchase so there may be some stability issue.
  3. Crash was approximately 18:30 on July 10th. I was using plex with the iGPU at the time and the stream stopped abruptly. I logged into the webgui which is noted at 18:31:13.364. Plex had been in use for an hour or so so those errors at 15:37 were likely when a movie stream had begun.
  4. Began seeing crashes with 6.12 and I've been unable to pin it down. Sometimes it happens within 24 hours, sometimes a little over 48 hours. I tried going with all containers off and it occurred a day later. Sometimes it's when watching Plex, and sometimes it's hours after I go to sleep. Thought it might be from switching to ZFS on cache so I switched back to BTRFS. Thought it might be RAM but Memtest 86 passed default tests. Deleted all VM's Turned off Powersaving I'd be happy to know it's something I'm missing, and if this is in the wrong sub-forum kindly correct my ignorance and move. (Logs extracted from Syslog Watcher Manager. Crash event occurred on July 10th, but I also attached logs covering startup on July 09th through event.) Thanks, TheFullTimer marshall-diagnostics-20230710-1847.zip Syslog-marshall-07.10.23.log Syslog-marshall-07.09-to-07.10.log
  5. That would be in your `appdata` directory. From the Shares tab it is named `appdata` by default, then inside of that share it is `appdata\stash\config`. Then, inside that directory, following the instructions from Github:Stashapp-CommunityScrapers you would either create a folder named `scrapers` or place your downloaded scrapers into the existing folder of that name.
  6. Not sure if this should go here or with the stash peeps, but I have an issue with Tagger. None of the matched and submitted scenes are saved permanently. They appear to be matched when I check the scene information, but anytime I run Tagger they show up again and congest the searches.
  7. I've had issues with deleting files from folders, and users report issues uploading. Running 19.0.3 and also had issues with the updater coming back with errors once or twice. Not sure how to fix or rebuild.
  8. I recently moved to a new house and my server is assigned a new Lan address. The port forwarding is set correctly but Nextcloud is unresponsive. When I attempt to access via 192.168.1.*:444 I receive this message. The error log shows Not sure how to proceed with correcting this issue.
  9. I’ve had the same problem. Not sure if you found a cause yet. I’m also using a Gigabyte board and Threadripper. X399 Designare 1900X Threadripper 64GB of RAM I’ve juggled my three cards between every slot on the board, but only the same one is recognized by Unraid as available to VM’s. The board itself can be assigned to boot graphics to any slot that I want, successfully. 42:00.0, 42:00.1, 43:00.0, & 43:00.1 Aren’t detected in the system devices by Unraid, but are recognized at a lspci request from the terminal. Example photo attached
  10. Taken from the Ubuntu VM log after starting it and waiting.
  11. Just a minute ago it worked for my Ubuntu VM again until I shut it down. Then I tried my Windows VM and nothing at all. Went back to Ubuntu and now it won't output.
  12. Rather suddenly my Nvidia GPU no longer passes through to my VM's. About two weeks ago I changed my cache drive from SATA to NVME and my VM's still booted and played just fine. Then my windows VM would not output to my monitor, but my Ubuntu VM would, so I continued to use that one. Now neither output to the monitor and I'm not sure what happened. I never keep precious data in my VM's so I've deleted and started new ones, which didn't fix it. I've changed the bios the GPU was booting with and checked the Nvidia .rom file. I just haven't been able to figure it out with the free time I've had. The VM's work fine as VNC so I've used them in that way for some of what I need but I'd love the display back for movies and gaming. Does anyone have some advice to point me in the right direction? It would be greatly appreciated. X399 Designaire Threadripper 1900X AMD 5450 in PCIX16_1 MSI Seahawk 1070 in PCIX16_2 Samsung 970 EVO in M2M_32G marshall-diagnostics-20181021-0702.zip
  13. Found what may be the cause for my issue. System Thread Exception Not Handled during my Avast Antivirus installation. Repeated a clean install of Windows 10 and it happens even during a minimal installation of Avast on both 1709 & 1803 Win 10 Pro.
  14. I also clean installed 1803 last week and experienced my issues. I'll find a 17xx image and try that instead. I wonder what was changed that would cause this trouble. I had previously tried installations with a single core and 2gb of ram, and other combinations, but all experienced the bsod after a few installations and reboots.
  15. Bump, anyone with this System Thread Exception issue?