Neogola

yeah now i see the sig, too

The downgrade and the transcode works great, again!!! Thanks

please post the link i dont see your signature or find this faq in your profile. Sorry and thanks for your work

i have issues with version 1.5.1.3520 with the web Client. All Browser says "convert failed..." with the version before all works great! I need instruction to downgrade the version 1.5.1.3520 Thank you

The automatically Hibernation is Disabled at the moment.

I make same tests... 1: - plug out all Hard disk sata cables - no hard disk is now connected - exclude the pcie sata card from the mainboard nothing is connected to the mainboard now --> wake up don´t work 2: - uninstall all plugins and the dynamix s3 sleep plugin is installed now --> wake up don´t work 3: - plug in a intel network card and connect the network cable only to this intel card --> wake up don´t work i repeat nothing is connected on the mainboard except lan-cable, vga, keyboard and the usb stick (i try this stick on the mainboard directly and on the backside from the case). I have no signal on the monitor, no ssh, no telnet, no webgui only the pink works great I have no more ideas

Hi skank, hava you found a solution for your wake up problem? i have the same isues with a "asus z9pa-u8". Please give same information to fix this problem. My thread: https://lime-technology.com/forum/index.php?topic=54762.0

i post new screens in my thread: https://lime-technology.com/forum/index.php?topic=54762.msg523687#msg523687 I hope someone can help me

i try a many configs in the BIOS but no solution after the wake up the WebGui is unreachable, no ssh and no telnet connection works only the ping works. The monitor says no signal (onboard). EIST: Enabled and Disabled Turbo Mode: Enabled and Disabled P-State: HW_ALL, SW_ALL, SW_ANY CPU C3 Report: Enabled and Disabled I Enable "Lock Legacy Resources" feature but with this setting the sleep function not work Link to the mainboard manual: http://images10.newegg.com/UploadFilesForNewegg/itemintelligence/ASUS/E7573_Z9PA_U81401484489902.pdf The Force Gigabit option in Dynamix S3 Sleep plugin is disabled now

it´s a onboard card. The WebGui, telnet and ssh is unreachable, too.

i try this in the first tests. I think the problem is the wake up i have no picture on the monitor (he´s say no signal) and ssh, telnet no connection, only the ping works.

What version of unRAID are you running? Maybe try v6.3.0rc and see if this improves your situation. is a fresh installation with 6.2.4. i see the 6.3.0rc is a prerelease. Is in v6.3 many bugs? EDIT: i try v6.3 and no solution for the wake up problem

Hi, i have problems with the S3 sleep Plugin. After wake up is the system unreachable. Link to the Thread: https://lime-technology.com/forum/index.php?topic=54762.0

Thank you and i think i try it with high-water

Hi everyone, i create a new system for my media stuff and at the moment i test the "Dynamix S3 Sleep". The system go to sleep mode and every is good but after the wake up the system is unreachable. - Ping is OK - the LED change from flash to shine - ssh no connection - VGA Port down the monitor says no signal - webgui unreachable After sleep mode and wake up i must push allways the RESET button on the case. I try many settings in the BIOS but i think all is okay i suspect i need a paramater or anything in the plugin. Mainboard: ASUS z9pa-u8 CPU: E5-2650 2.0GHZ LAN: onboard