puncho

I believe I had deleted/done that when my docker utilization was high and I was able to figure out the logs to pihole was creating an issue. Still, I did it again and posted the logs below. I also cleared up some space in the disks that were full and deleted the downloading, things are back to normal for now. Thanks. unraid-diagnostics-20220129-1340.zip

Thanks. It looks like the docker image and appdata is already in cache?

Ah. I think the issue is that I started the download while there was very little space left and it's not finished yet. So it is still trying to fill up that full disk instead of writing to the new one. Would it be best to move some user shares to the new disk so it has enough room to finish the download and then subsequently write new data to the new disk? Thanks

Hi, I installed a new hard drive and got it mounted in unraid. Everything was working well. I was downloading a large file (cache issue?) and when I came home all my dockers were stopped. I rebooted a few times and I would get either EXECUTION ERROR: ERROR CODE 403 or Docker Service failed to start. Help would be appreciated, attached the diagnostic logs. Thanks! unraid-diagnostics-20220127-2059.zip

Thanks! Would it be OK to use the provided cables or would you recommend buying these? https://www.amazon.com/Cable-Matters-Internal-SFF-8087-Breakout/dp/B012BPLYJC?th=1

Looking to get a PCIe 3.0 x 1 to add 2 SATA ports for my dell t30 server. I'm looking at these two Jmicron JMB582 cards: 1) https://www.ebay.com/itm/284024382281 2) https://www.amazon.com/MZHOU-Expansion-JMICRON-Adapter-Low-Profile/dp/B099ZCXJLQ/ref=sr_1_4?crid=11Y9IFL8M9QMK&keywords=jmicron%2Bjmb582%2Bio%2Bcrest&qid=1641922637&s=electronics&sprefix=jmicron%2Bjmb582%2Biocrest%2Celectronics%2C113&sr=1-4&th=1 They say they support port multipliers...any insight as to which I should get if not one of these? Thanks!

Thanks. Didn't read the one star reviews until now...will get another one and hope it didn't mess everything up.

Hi, I just installed 2 new HDDs to my t30 Unraid server. I added a PCI card (https://www.amazon.com/gp/product/B07M942LN9/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1) and power cable splitter (https://www.amazon.com/gp/product/B0086OGN9E/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1). When I turned it on it didn't show up so I plugged in a monitor and it says "no operating system is currently installed on this system". I'm assuming it's not reading the flash drive/Unraid for booting up? How do I fix this? Since it didn't even start Unraid I'm assuming it's safe to just turn it on/off to reboot it. Thanks!

Thanks, that worked!

I'm not sure when exactly but all of a sudden the docker is no longer working. I didn't change anything but it updated to the latest version and I'm running unraid v6.8.2. Any ideas where to start? 2021-08-27 14:36:35 Socket Buffers: R=[212992->212992] S=[212992->212992] 2021-08-27 14:36:35 UDP link local: (not bound) 2021-08-27 14:36:35 UDP link remote: [AF_INET]50.7.136.139:8292 2021-08-27 14:37:35,524 DEBG 'start-script' stdout output: 2021-08-27 14:37:35 [UNDEF] Inactivity timeout (--ping-restart), restarting 2021-08-27 14:37:35,524 DEBG 'start-script' stdout output: 2021-08-27 14:37:35 SIGHUP[soft,ping-restart] received, process restarting 2021-08-27 14:37:35,524 DEBG 'start-script' stdout output: 2021-08-27 14:37:35 WARNING: Compression for receiving enabled. Compression has been used in the past to break encryption. Sent packets are not compressed unless "allow-compression yes" is also set. 2021-08-27 14:37:35 DEPRECATED OPTION: --max-routes option ignored.The number of routes is unlimited as of OpenVPN 2.4. This option will be removed in a future version, please remove it from your configuration. 2021-08-27 14:37:35,524 DEBG 'start-script' stdout output: 2021-08-27 14:37:35 DEPRECATED OPTION: --cipher set to 'AES-256-CBC' but missing in --data-ciphers (AES-256-GCM:AES-128-GCM). Future OpenVPN version will ignore --cipher for cipher negotiations. Add 'AES-256-CBC' to --data-ciphers or change --cipher 'AES-256-CBC' to --data-ciphers-fallback 'AES-256-CBC' to silence this warning. 2021-08-27 14:37:35 WARNING: file 'credentials.conf' is group or others accessible 2021-08-27 14:37:35 OpenVPN 2.5.0 [git:makepkg/a73072d8f780e888+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Nov 6 2020 2021-08-27 14:37:35 library versions: OpenSSL 1.1.1j 16 Feb 2021, LZO 2.10 2021-08-27 14:37:35 Restart pause, 5 second(s) 2021-08-27 14:37:40,525 DEBG 'start-script' stdout output: 2021-08-27 14:37:40 WARNING: --ns-cert-type is DEPRECATED. Use --remote-cert-tls instead. 2021-08-27 14:37:40 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts 2021-08-27 14:37:40,525 DEBG 'start-script' stdout output: 2021-08-27 14:37:40 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication 2021-08-27 14:37:40 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication 2021-08-27 14:37:40 TCP/UDP: Preserving recently used remote address: [AF_INET]50.7.136.139:8292 2021-08-27 14:37:40 Socket Buffers: R=[212992->212992] S=[212992->212992] 2021-08-27 14:37:40 UDP link local: (not bound) 2021-08-27 14:37:40 UDP link remote: [AF_INET]50.7.136.139:8292

How do I reset my admin/user password via the terminal? I had v16 and couldn't access it via the webUI cause of the PHP issue. I was able to update it to v17.0.0.1 and would like to continue to update it via the webUI. But now, when I try to login, it says my username/password is incorrect (even though I know it's right since I used it not too long ago). Thanks!

Argh, thanks. Will look into it when I have time, meantime I'll keep using letsencrypt config

Tried that, didn't do anything. Still get this error:

Any thoughts on this?

Hi, trying to follow SpaceInvaderOne's change from letsencrypt to swag. Getting to the part about changing nextcloud's config, I don't have any trusted proxies under my config file. So, when I try to use swag and nextcloud I can't get in. Any tips? Thanks!

For anyone who's looking for the solution in the future, you would get the error message "There was an error with message: Empty response from the server. Do you want to review mount point config in admin settings page?" You have to edit the docker settings and add the "Apps" share as a new host path, then it should work

Hi, I added my unraid root folders in the past to be able to share/add to it but now when I try to add another folder, I'm getting a red stop sign/unable to. Any hints as to where to start to fix it?

Hi, everything was working fine and then a week or so ago, privoxy stopped working. I didn't change anything. 2020-07-21 23:00:09,109 DEBG 'start-script' stdout output: Tue Jul 21 23:00:09 2020 WARNING: file 'credentials.conf' is group or others accessible 2020-07-21 23:00:09,110 DEBG 'start-script' stdout output: Tue Jul 21 23:00:09 2020 OpenVPN 2.4.9 [git:makepkg/9b0dafca6c50b8bb+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Apr 20 2020 Tue Jul 21 23:00:09 2020 library versions: OpenSSL 1.1.1g 21 Apr 2020, LZO 2.10 Tue Jul 21 23:00:09 2020 Restart pause, 5 second(s) 2020-07-21 23:00:09,108 DEBG 'start-script' stdout output: Tue Jul 21 23:00:09 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting 2020-07-21 23:00:09,109 DEBG 'start-script' stdout output: Tue Jul 21 23:00:09 2020 SIGHUP[soft,ping-restart] received, process restarting 2020-07-21 23:00:09,109 DEBG 'start-script' stdout output: Tue Jul 21 23:00:09 2020 DEPRECATED OPTION: --max-routes option ignored.The number of routes is unlimited as of OpenVPN 2.4. This option will be removed in a future version, please remove it from your configuration. 2020-07-21 23:00:09,109 DEBG 'start-script' stdout output: Tue Jul 21 23:00:09 2020 WARNING: file 'credentials.conf' is group or others accessible 2020-07-21 23:00:09,110 DEBG 'start-script' stdout output: Tue Jul 21 23:00:09 2020 OpenVPN 2.4.9 [git:makepkg/9b0dafca6c50b8bb+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Apr 20 2020 Tue Jul 21 23:00:09 2020 library versions: OpenSSL 1.1.1g 21 Apr 2020, LZO 2.10 Tue Jul 21 23:00:09 2020 Restart pause, 5 second(s) 2020-07-21 23:00:14,110 DEBG 'start-script' stdout output: Tue Jul 21 23:00:14 2020 WARNING: --ns-cert-type is DEPRECATED. Use --remote-cert-tls instead. Tue Jul 21 23:00:14 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts 2020-07-21 23:00:14,110 DEBG 'start-script' stdout output: Tue Jul 21 23:00:14 2020 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Jul 21 23:00:14 2020 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication 2020-07-21 23:00:14,110 DEBG 'start-script' stdout output: Tue Jul 21 23:00:14 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]50.7.136.139:8292 Tue Jul 21 23:00:14 2020 Socket Buffers: R=[212992->212992] S=[212992->212992] Tue Jul 21 23:00:14 2020 UDP link local: (not bound) Tue Jul 21 23:00:14 2020 UDP link remote: [AF_INET]50.7.136.139:8292 And when I go to my browser, it shows "404This is Privoxy 3.0.28 on 4cde80fc9fce (xxx.xx.x.x), port 8118, enabled" Any ideas? Thanks!

Hi, I can't use port 6881 so looking to change the port. I went to rtorrent.rc in the config folder but don't see anywhere to change the incoming port connections (to 7881-7999). How can I change it? Do I need to change anything in the container page (and if so, what do I need to change/add)? Thank you!

Any idea on where to start with this? Thanks

Hi, I just switched from your delugevpn to rtorrentvpn. Thanks for both these great containers. I copied the openvpn files from deluge to rtorrent. I'm able to get to the webui and download a torrent, however I don't believe privoxy is working. On my desktop, I'm using Chrome and the foxyproxy extension to access unraid/rtorrentvpn to connect to certain torrent sites but am unable to connect. Is there a way to check if it's working? I've included my logs below, thank you!

Doesn't seem like my certs are renewing for some reason...thanks in advance for any insight. User uid: 99 User gid: 100 ------------------------------------- [cont-init.d] 10-adduser: exited 0. [cont-init.d] 20-config: executing... [cont-init.d] 20-config: exited 0. [cont-init.d] 30-keygen: executing... using keys found in /config/keys [cont-init.d] 30-keygen: exited 0. [cont-init.d] 50-config: executing... Variables set: PUID=99 PGID=100 TZ=America/Los_Angeles URL=mydomain.duckdns.org SUBDOMAINS=nextcloud,home,heimdall EXTRA_DOMAINS= ONLY_SUBDOMAINS=false DHLEVEL=2048 VALIDATION=http DNSPLUGIN= [email protected] STAGING= 2048 bit DH parameters present SUBDOMAINS entered, processing SUBDOMAINS entered, processing Sub-domains processed are: -d nextcloud.mydomain.duckdns.org -d home.mydomain.duckdns.org -d heimdall.mydomain.duckdns.org E-mail address entered: [email protected] http validation is selected Certificate exists; parameters unchanged; starting nginx [cont-init.d] 50-config: exited 0. [cont-init.d] 60-renew: executing... The cert is either expired or it expires within the next day. Attempting to renew. This could take up to 10 minutes. <-------------------------------------------------> <-------------------------------------------------> cronjob running on Thu Apr 2 22:27:57 PDT 2020 Running certbot renew Saving debug log to /var/log/letsencrypt/letsencrypt.log - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Processing /etc/letsencrypt/renewal/mydomain.duckdns.org.conf - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Traceback (most recent call last): File "/usr/lib/python3.8/site-packages/certbot/_internal/renewal.py", line 63, in _reconstitute renewal_candidate = storage.RenewableCert(full_path, config) File "/usr/lib/python3.8/site-packages/certbot/_internal/storage.py", line 445, in __init__ raise errors.CertStorageError( certbot.errors.CertStorageError: renewal config file {} is missing a required file reference Renewal configuration file /etc/letsencrypt/renewal/mydomain.duckdns.org.conf is broken. Skipping. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - No renewals were attempted. No hooks were run. Additionally, the following renewal configurations were invalid: /etc/letsencrypt/renewal/mydomain.duckdns.org.conf (parsefail) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0 renew failure(s), 1 parse failure(s) [cont-init.d] 60-renew: exited 0. [cont-init.d] 99-custom-files: executing... [custom-init] no custom files found exiting... [cont-init.d] 99-custom-files: exited 0. [cont-init.d] done. [services.d] starting services [services.d] done. nginx: [alert] detected a LuaJIT version which is not OpenResty's; many optimizations will be disabled and performance will be compromised (see https://github.com/openresty/luajit2 for OpenResty's LuaJIT or, even better, consider using the OpenResty releases from https://openresty.org/en/download.html) nginx: [error] lua_load_resty_core failed to load the resty.core module from https://github.com/openresty/lua-resty-core; ensure you are using an OpenResty release from https://openresty.org/en/download.html (rc: 2, reason: module 'resty.core' not found: no field package.preload['resty.core'] no file './resty/core.lua' no file '/usr/share/luajit-2.1.0-beta3/resty/core.lua' no file '/usr/local/share/lua/5.1/resty/core.lua' no file '/usr/local/share/lua/5.1/resty/core/init.lua' no file '/usr/share/lua/5.1/resty/core.lua' no file '/usr/share/lua/5.1/resty/core/init.lua' no file '/usr/share/lua/common/resty/core.lua' no file '/usr/share/lua/common/resty/core/init.lua' no file './resty/core.so' no file '/usr/local/lib/lua/5.1/resty/core.so' no file '/usr/lib/lua/5.1/resty/core.so' no file '/usr/local/lib/lua/5.1/loadall.so' no file './resty.so' no file '/usr/local/lib/lua/5.1/resty.so' no file '/usr/lib/lua/5.1/resty.so' no file '/usr/local/lib/lua/5.1/loadall.so') Server ready

Hi, I installed the latest update, running unraid v6.6.6. Now when I try to access my duckdns page, I get "NET::ERR_CERT_DATE_INVALID". Logs don't seem to show any errors...is this related to letsencrypt? Thanks!

I tried both. I had to go into my router and change the DNS back to its original state instead of pihole. Not sure what the issue was, I followed space invader's tutorial. At least I know how to fix it in the future. Thank you for your advice!

Yes, I deleted off the flash and rebooted.