derMeister

Thank god, a static IP (for unraid) fixed the problem, know my docker-containers get loaded after a reboot with br0...

Note: Micro Update fixing Websites blocked by Firewall Port scan detection has just been released for AVAST https://forum.avast.com/index.php?topic=199857.msg1388211#msg1388211 I've reactivated Port Scanning after installing the Avast update and rebooting 2 times, everything is working again...(still f*c#ing Avast, got the next problem with my SmartTV/Chromecast that disappears if i deactivate Avast Firewall)... but unRaid works again!!

Note: Micro Update fixing Websites blocked by Firewall Port scan detection has just been released for AVAST https://forum.avast.com/index.php?topic=199857.msg1388211#msg1388211

PFSense is probably the best way to go for firewalling anyway! But the avast forums suggested to deactivate the "Port Scan Detection" feature and that seamed to work and fix the problem finally! https://forum.avast.com/index.php?topic=201129.0

That's true, happened to me right now! But using the "deactivating avast for 10 minutes" option via the avast system tray icon immediate solves the issue and the GUI starts working again. It still works if i activate Avast again after refreshing the browser tap, so I'm not sure if a special rule inside the avast firewall would help. There for i would be interested if this only happens to Avast Internet Security (and better) with the Avast Firewall or if other Firewalls reproduce that issue to. Lets see what Avast says about that problem! https://forum.avast.com/index.php?topic=201129.0 The avast forums suggested to deactivate the Port Scanning and that seamed to work and fix the problem finally!

Do you use a Antivirus/Firewall/AdBlocker? Avast Internet Security caused that Problem for me, here is how i fixed it.

That is the solution without deactivating your Avast Firewall completely!

I deactivated Adblock Plus in Firefox with no noticeable improvement and i tried the same in Chrome, but the GUI still gets unresponsive. I'm running a Avast Internet Security Suite and i had problems with that AV and my VMs before. Guess what!? I deactivated the Anti Virus and everything runs flawless! The GUI got unresponsive because of my Avast Antivirus! THANKS Bonienl, i love you!

i tried the following settings on a completely formatted and fresh install of unRaid 6.3.3 # Generated network settings USE_DHCP="no" IPADDR="10.2.10.101" NETMASK="255.255.255.0" GATEWAY="10.2.10.1" DHCP_KEEPRESOLV="no" DNS_SERVER1="208.67.222.222" DNS_SERVER2="208.67.220.220" BONDING="no" BRIDGING="yes" Still the GUI loads one time and then doesn't respond anymore. I run memtest for 6 Hours with 3 passes and 0 errors. I switched the network-cable and router ports. Still no success unRaids remote GUI always loads the first time i open the browser and then freezes ... ------------------------------ I put my old unRaid 6.3.1 installation back on my stick. Now My Plexserver is running, my Teamspeakserver is running, my Windows7VM is running and i can manage the GUI from the local Hardware. Only the problem with the remote GUI still is there. How could you explain this? If there is a configuration Problem, nothing shut work, but its only the GUI and only the GUI from a remote browser. This has to be a bug right, after all the other people complaining about the unresponsive GUI....!?

Interesting, i just setup a clean installation of 6.3.3, at the first Page i tried to install my basic.key and timeout... That would match your assumption... I prior already changed the Router from a Asus Tomato build to a Linksys OpenWRT build, shouldn't this change the hole network setup? Would you mind telling me what settings seemed unusual to you!?

I had my unRaid Box running for months without any obvious problems. Shares worked, Dockers worked, VMs worked but my plexserver needed an update. So yesterday i tried to login to the GUI, but the GUI didn't load or loaded extremely slow and than got stuck. I tried it several times but never got far, the first page "main" would load sometimes but switching to Dockers ended in a freeze. There i realized that this Problem had also occurred the first time in November or December 2016 after updating unRaid, but it disappeared after a dirty reboot and the following rebuild of the array. Okay now i'll write down what i tried to solve this without any noticeable success and i hope you guys can help me!! - I'm using this usbdrive - Kingston DataTraveler Micro DTMCK 16 GB - I also tried a different usbdrive - Kingston DataTraveler DTIG4 16 GB - Changed the router from a Asus RT-AC66U to a new Linksys WRT1900ACS - I'm using Firefox 52 as browser for remote GUI - I'm using Kitty(putty) for Telnet/SSH - tried unRaid 6.2.4 nas-6.2.4-diagnostics-20170419-0932.zip - tried unRaid 6.3.2 nas-6.3.2-diagnostics-20170419-1024.zip - tried unRaid 6.3.3 nas-6.3.3-diagnostics-20170419-1621.zip - deactivated and deleted serverio-Plexserver Docker - deactivated and deleted binhex-Teamspeakserver Docker - deactivated Win7pro VM - unplugged usb UPS - installed and run "Fix Common Problems" Plugin with no significant errors beside installing CA and activating autoupdates The System (version 6.3.2) had updated over the GUI to version 6.3.3 now and I'm waiting for "main" to load so i can hit the "reboot" button. I know i could use the local command "powerdown" and it would work immediately, but normally the system has no display or even a keyboard, so i need the GUI to work! So after the reboot the only warning is the missing UPS and i was able to get from "Main" to "Tools" without a problem but after hitting "Diagnostics" the connection timed out. I waited 5 Minutes now, GUI in firefox is not responding at all, the SMB shares cannot be reached,no reaction true telnet/ssh, but the local command line is still responding and my only wait to shutdown the system... The last thing i could think of is backup all data and reinstall/rebuild everything completely. Did nobody know what could be wrong and hot i can fix it?

I've got the same Problem here. WebGUI most of the time not responsive, putty sometimes times out, local Command-line works fine, local GUI also works fine. All Dockers, VMs and SMB shares work fine... Tried everything i could find but nothing helped, i'll write a detailed post with logs and what i tried soon. I found a lot of people with the "not responsive GUI Problem" and no solution... Did nobody fix this and could tell what exactly the problem was?

So everything is back working as intended! Here is what i did! Rebooted the frozen UnRaid (6.2.4) and checked for bios updates while reboot, but it's uptodate. After boot i clicked on "Expired" on the top left and followed the procure to renew the trail-license for additional 14 days. Followed by a "Check for Updates" under the "Plugins" tab, run the update to "UnRaid 6.3.1" completed with another reboot. After that the server started properly, the Array was fine btw, all dockers run and the problematic VM was off because autorun was disabled. I started the VM and it worked, it booted to Windows 7 Desktop right away and the before updated AVG (Free 1606) antivirus was and is still running! After all the trouble I'm very happy now. I intend to uninstall AVG and try my Avast Internet Security Suit next week and I'm optimistic it will work! After that i intend to buy a plus license and support Lime tech and its community that way. Thanks again for the critical, constructive and fast responses from all of you.