666gene

Im comfortable that this has been resolved. Appreciate all your input. I believe it was due to not being in a USB2 Slot. iv set this to [SOLVED]

No errors were found on the USB. iv confirmed that the USB was indeed in a USB 3 port and have now moved it to a suitable USB 2 Port. will confirm if all is still fine tomorrow.

Really appreciate the feedback guys. i love this community. i will try this tonight when i get physical access to the machine. Will get back to you.

Will a simple ChkDsk suffice like below article? or should i be running a better tool? https://helpdeskgeek.com/how-to/run-chkdsk-utility-xp/

am i doing this right? i noticed that i got an IO error during Diag collection. error showing in previous post. could this be a USB issue?

sorry for my ignorance. Due to not being able to get to the UI whats the best method to getting log file off the flash drive? normally i have is passed through as a share but its a reasonably new server and didnt enable flash share option.. and i dont have Krusader running atm to copy the file over. The server is remote so i haven't got physical access to it at this time. Would restarting just to get the file be an option? i know that restarting fixes the issue so i wanted to leave it running for troubleshooting purposes, but if needed iv already extracted the file and can restart.

Dont have Antivirus and adblocker is paused for that site. Also tried on microsoft Edge and wasn't working and i dont have addons on that browser.

Hi Unraid Community hope all is well. I seem to be having an issue with my unraid server UI when i log in i get a blank screen. only resolved if i restart the whole server using TERMINAL. then about a week later the problem comes back. any ideas? iv tried other browsers with no luck.

Id Also Like to thank the team for a great product. I appreciate the support over the years thanks.

Legend. Thanks yeh the card arrived today and on further research iv got the info i need appreciate the reply! If everything goes to plan is there anywhere i can write feedback on my experience with the card and unraid to help the community?

I have a raid controler that I'm gonna flash I can try it's on its way. But it's a whole new system and it's only this disk. Other 2 mount ok.

Thanks for your helps guys. heres the output after enabling smart on the disk root@Tower:~# smartctl /dev/sdg -a smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.14.40-unRAID] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST3000DM001-9YN166 Serial Number: S1F0DZFF LU WWN Device Id: 5 000c50 04b349b04 Firmware Version: CC4B User Capacity: 3,000,591,900,160 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jun 12 08:05:55 2018 AEST ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/223651en SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 334) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 78951064 3 Spin_Up_Time 0x0003 094 092 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 64 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 30855948 9 Power_On_Hours 0x0032 080 080 000 Old_age Always - 17525 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 12 183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 074 058 045 Old_age Always - 26 (Min/Max 26/26) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 8 193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 2815 194 Temperature_Celsius 0x0022 026 042 000 Old_age Always - 26 (0 19 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 16882h+14m+23.328s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 209036145745782 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 122673799284549 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

not sure i can. from the GUI. Does this info help? seems SMART support in disabled... im sure the disk was fine when in the array running for 2 years. should i enable option -s?

am i doing this right? i read that im better to run this on the volume rather than the device. https://lime-technology.com/forums/topic/38408-bad-primary-superblock-bad-magic-number

would this be what your refering to @itimpi https://lime-technology.com/wiki/Check_Disk_Filesystems#Preparing_to_test

hmm so i have a brand new Hardware/config Unraid server and im still unable to mount the xfs disk from my old Unraid box . would this have something to do with HPA or is it just a coincidence? Any help on this is much appreciate as data on the disk is important.

hmm no luck. im going to rebuild a new server this weekend and ill try mount when iv finished setup.

Can't mount old array data disk in unassigned devices. To move to new array. Any assistance much appreciated

Hey guys New User here. Just purchased the Controller Below. https://www.newegg.com/global/au/Product/Product.aspx?Item=9SIA4A05M20945 Just confirming the guides is still valid as zip files are from 2011

Setting unBalance Page to HTTPS:// fixed my issue.

24GB Non ECC DDR3

no issues here thanks for the update

Great additional feature please consider implementing

Hi All Need some assistance with FileBot. I have filebot Docker running in Unaid and it looks like it is running on files before they are finished being moved to that directory. this is occurring with Zip files. it extracts before all rar files are present in the folder. The input location is set up with syncthing so rar files can take some time to populate in the folder . How can i maybe schedual or hold filebot from running until all rar files are present? Post below mentions using extractor=SevenZipExecutable. how do i go about doing this? Any help would be appreciated. other user having same issue below. https://www.filebot.net/forums/viewtopic.php?t=4530#p25361

Great discussion guys. If you dont mind me asking can somone link configuring raid 10 for cache disk Sent from my SM-G900I using Tapatalk