m.b.d

After Upgrading to 6.12.3 when i click on most of my dockers (Binhex-sonarr, binhex-sabnzbd, and binhex-radarr) i've lost the ability to open WebUI? I can still direct open to the IP:port Is this something that needs to be enabled?

Just read the error for the 5th time and noticed that. Is there a way to swap out the usb drive for a new one? My current drive is like 9 years old

All my plugins are up todate, all my dockers are up to date, when I go to install the new unraid update I get the bellow information. First time I've ever had a problem updating unraid, please help. plugin: updating: unRAIDServer.plg plugin: downloading: https://unraid-dl.sfo2.cdn.digitaloceanspaces.com/stable/unRAIDServer-6.10.3-x86_64.zip ... done plugin: downloading: https://unraid-dl.sfo2.cdn.digitaloceanspaces.com/stable/unRAIDServer-6.10.3-x86_64.md5 ... done boot device shows 273952768 free but upgrade needs 310215571 plugin: run failed: /bin/bash retval: 1 Edit: Currently running 6.9.22 Unraid Os Pro

Well from reading all the responses and looking at documentation it appears setting up a new server, then moving drives and getting them working correctly is highly unadvisable. So I'm going to just move my storage drives, and USB to the new server and work to get everything reconfigured from there.

Yes Pools is a much better way to refer to them. The main reason I want to use a new usb is I'd like to change how some of my dockers work and put them on new vlans and I'd like to accomplish this with out my wife or son asking why Plex isnt working and force me into rushing the migration. No one of the drives are 12 year old drives. Currently I have Parity - 8TB Seagate ST8000VN004 Disk 1 - 8TB Seagate ST8000VN004 Disk 2 - 8TB Seagate ST8000VN004 Disk 3 - 3TB Seagate ST3000VN000 Disk 4 - 3TB Seagate ST3000VN000 Disk 5 - 3TB Seagate ST3000VN000 All XFS fire format Cache - 1TB SSD Samsung VM Drive - 1TB SSD Samsung All btrfs file format Yes I have a full backup as of 2 days ago. I try to backup the server by share every few weeks. They are UBS Drives that I plug into my desktop and set to sync the shares overnight (it happens more "when I think about it").

Thanks for the advice. Your move sounds a bit different than mine. I'm moving drives from one server to another server that has a new unraid OS on a new USB.

My current unraid server is going on 12 years old and its time to redo the hardware. I've been pondering this for well over 2 years and have finally pulled the trigger and ebay some newer hardware. Here's my question. The new server will have NVME, and SSD cache storage arrays. one array for cache, one for Dockers and VMs. I'd like to setup my dockers and make sure everything is working as expected before moving my drives (with data) from my old server to the new one. Once the new server is setup and I'm happy with how its running can I just screen cap my current drive assignments move the physical drives to the new server and assign them in the same order and everything will be peachy or do I need to move over some configuration from my usb drive? Yes I own two unraid licenses keys. Also the drive array is encrypted

^^ Thanks. this works like a champ... its always something simple that i miss....

Update, I was able to finally boot into Safe Mode, I've set all networking to no bridging no bonding see if that resolved the problem. When trying to connect to it from my desktop i get This site can’t be reached xxxxxx.unraid.net took too long to respond.

Today I moved my home from a dlink firewall to a PFSense firewall when doing so I lost connection to my unraid server. Server setup two network cards primary was static IP 192.168.1.2, secondary was dynamic Encryption in enabled Once i swapped over to the PFSense firewall I was able to log into my server using the 2nd nic with dynamic address. I stopped docker services went into my network settings and set the primary ip address to dynamic. After that I've lost all contact with the server. I hooked up a monitor and keyboard to the server and got nothing on the screen. I powered down the server, let it set for 30 sec powered it back on got my bios, and the selection screen where I could select boot mode Unraid, Unraid Gui, Unraid GUI safemode and such. I chose unraid GUI Safe Mode it went through all the normal linux loading scroll but never gave me a prompt. Now I'm stuck as to what to do. Can I pull the USB and edit network files on that to get it back up by assigning a static IP to the primary address?

Ok thanks looking into that now.

I'm running something very similar to spec #4 Supermicro x10sll-f w/ Xeon E3-1241 and 16gb ram. I draw about 65w of power when at idle, under full load (Transcoding 4k to phone) its never goes above 200w. It can software transcode only a single instance before problem arise. I looked at adding a GPU but I'm out of PCIE slots. I would look at adding a GPU to the mix

My current server is as follows Motherboard - Supermicro X10SLL-F Processor - Xeon E3-1241 v3 RAM - 16GB DDR3 ECC LAN - onboard dual Gig Storage - 3 Seagate ST8000VN004 Drives, 3 Seagate ST3000VN000 Drives Cache - 2 SSD 1TB (CT1000MX500SSD1) yes I get an error every so often on my cache drives they are plugged into PCIE to SATA boards With the recent upgrade to 2 4k tvs in my house and more and more content being watched and stored in native 4k on the system If my members of my household are watching on phones, or 1080p tv plex is using hardware transcoding and the little xeon just doesn't keep up. I know I can add a Nvidia card and do hardware transcoding and plan to do that in my upcoming build, but lack the PCIE ports to support such an upgrade on current system. So New Hardware. Processor - AMD Ryzen 5 56000x MB - ASRock X570 Phantom Gaming 4s RAM - Crucial Ballistix 64GB (2x32) 288-Pin DDR4 3200 (PC4 25600) Storage will carry over from existing server no upgrades or expansion. Cache - 2 Samsung 980 Pro M.2 2280 1TB PCI Express 4 x 4 NVMe Video Card - Nvidia Quadro P2000 (2nd hand but from rep source) Power supply will also carry over, its a 750w modular that was purchased for the existing server about 8 months ago.

My aging Intel Xeon E3-1241 is starting to show its age, with dockers, and VM running I need more core count. I've settled on a Intel Xeon Silver 4210 Processor, its now in hand. So its down to the mother board. I've narrowed it down to two, I'm looking for two 10G Nic, 8 SATA, 2 x M.2 (Cache). And I'm currently running my VMs, and Dockers off of a PCIe Optain Drive. Future expansion I'd expect to have PCI network cards added. My Options are SuperMicro MBD-X11SPI-TF-O NewEgg Page ASRock EPC621D8A NewEgg Link Thanks

It appears I resolved my issue. In my Completed Directory I created a TV and Movie Directory and added that to my Categories information. Thanks to all those that develop and support these projects.