@binhex seeing an error recently, however unsure if its directly SAB or the AutoProcess scripts, can you please advise?
Exit(127) /usr/bin/env: ‘python2’: No such file or directory
if you go to "edit" on the docker, scroll down to the repository line,
normally this would read: (latest)
binhex/arch-sickchill
to rollback to a known working version (with GUI etc)
binhex/arch-sickchill:v2021.04.10-1-01
I had the same issue with my various zone minder dockers. Unraid docker engine doesn’t handle memory management terribly well, which is what I put it down to Have seen migrated my 15 cameras off to BlueIris on an UnRaid Windows VM Sent from my iPhone using Tapatalk
As per johnnie I’ve seen Black, Blue, Silver and Red all used in OEM server builds for SAS cables Haven’t seen any documented standards on colours or even naming schema for breakout and reverse breakout cables HTH Sent from my iPhone using Tapatalk
What do you mean your ISP doesn’t allow you to forward ports, only CGNAT would allow that to be the case in the ISPs defence. Go to a new ISP who isn’t a douche canoe and go from there would be my bet. Sent from my iPhone using Tapatalk
That list is a good start, but I would recommend avoiding the Marvell based cards on it, as they aren’t as recommended as they used to be. Personally I would stick to the LSI based cards Sent from my iPhone using Tapatalk
LSI based cards LSI2008 chipset got spinners LSI3008 for SSDs Plenty of OEM versions available too; M1015, M1115, M1215, H200, H310, H330 HTH Sent from my iPhone using Tapatalk
As a Norco 4224 owner, Get the new 120mm fan wall as it has “hot swap” style 120mm fan carriers From there your choices are a lot higher, I run the Noctua 120mm industrial fans with a custom fan curve setup through IPMI Sent from my iPhone using Tapatalk
Hi! Something like this would be required https://www.asus.com/Motherboard-Accessory/HYPER-M-2-X16-CARD/ It’s a 16X card with a controller to bifurcate/split the lanes up HTH Sent from my iPhone using Tapatalk
Hi LimeTech and crew!
chasing down if the Phison PS5007-E7 controller is supported in UnRaid?
it seems to be showing up in a lot of enthusiast grade PCIE SSD of late
FYI current GPU’s struggle to saturate PCIe 3.0 8x lanes From memory only the TitanXP actually comes close, even my 1080Ti doesn’t push enough. Your issue with an 8 core is that you will be left with nothing for the OS as it favours Core-0 which is also a physical thread not a HT. Can you fit 4RU in your cabinet? Sent from my iPhone using Tapatalk
Most PCIe NVMe adaptors are passive if they’re single slot. The few available multi slot ones (like asus) require sub-controllers and lane control. I would personally opt for one with a heat sink or ability to mount a fan near etc as NVMe devices can get quite hot Sent from my iPhone using Tapatalk
Friends don’t let friends buy AsRock. I would stick to SuperMicro or ASUS for quality boards, ideally Server grade with ECC and a mid-class Xeon Sent from my iPhone using Tapatalk
Again, Marvell based cards are not recommended for use in UnRaid, most people like myself with large arrays use LSI based cards. As I’m not intimately familiar with the MV8, I’ll bow out of this thread Sent from my iPhone using Tapatalk