chvb

Members
  • Posts

    126
  • Joined

  • Last visited

Everything posted by chvb

  1. Hey, can you display the IP Address in the Webinterface when a IP Address is set a specific the Docker? See the picture in the Attachment as example. (pihole)
  2. Does someone have a prebuild 6.3.5 vmdk image? Thanks
  3. Hi Vaseer, this is not needed. You have to configure your nextcloud.
  4. Hello, I've added some Docker Templates: -Webgrabplus -TvhProxy -Collabora/Code
  5. For the DVBLink Docker you can now use a Softcam on a Intel System. I've tested it and it works well! Starting from build 14061/14072/14073 (depending on the platform - viewtopic.php?f=55&t=31285) DVBLink TVSource supports new plugin interface, called mdjapi. The plugins are only supported on intel-based platforms - e.g. Windows, Ubuntu, MacOS, all intel-based NAS models.The plugin spec comes from the original acamd author and was recently published here (spec is in English, site is in Dutch):https://www.sat4all.com/forums/topic/23 ... &p=2430476Another group of developers was working on the implementation of mdjapi for DVBLink. I have seen the pre-built binaries on a filedrop site at the following link (I do not know how long they will stay there):http://dropmefiles.com/B47VMThe plugins have to be put into <dvblink share directory>/mirror/sources/<your tvsource source>/plugins.
  6. Did you have add the extra Parameters? I use a SatIP Device. There is working everything fine.
  7. After hours of testing the DVBLink Docker is working without Problems. The Config Files are now in the Unraid share so the configuration is consistant. The DVBLink Docker is starting correctly after a restart. Enjoy it.
  8. see this thread: https://lime-technology.com/forum/index.php?topic=54568.msg521369#msg521369 cheers
  9. AMD Hardware should work also if your CPU supports AMD-Vi
  10. you can passthrough a Hard Drive: see here: https://lime-technology.com/forum/index.php?topic=42490.msg404648#msg404648
  11. the Problem is that Nvidia disable the Gamestream function when there is no Monitor detected. So you have to use this Dongle for a headless PC.
  12. Hi, activate the Remote Support for your Windows and use the Microsoft Remote Desktop from Microsoft for your Macbook. The Port is 3389. But you only need to enter the IP of your VM. A good tool is also Splashtop.
  13. Yes it works. But your have to use a Headless Dongle: http://www.fit-pc.com/web/products/fit-headless/
  14. Hey, set the vcpu to 1 and try again. That should work.
  15. Hey, normally you don't have to dump your BIOS from your Geforce GTX Card. Your CPU has a GPU build in. - Go to your BIOS and check, if your iGPU is activated - check in your BIOS that the Grafic init is set to your iGPU - Boot your System. The Console should show with your iGPU Now you can passthrough your Geforce Card without any Problems!
  16. hey, thanks for this solution. I've tested this with my skylake server. it's working. Thanks.
  17. at the moment the way to go is the use of a vm machine. When you have a skylake cpu you can install a ubuntu 16.04 vm and passthrough your intel gpu. You have to use the unraid 6.3 RC Version. In Emby you have to set Vaapi transcoding. That solution works.
  18. hey, with the new Unraid 6.3 RC Version you can enable Hyper-V and passthrough a Nvidia Card. You have to set a vendor_id see this example: <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='123456789ab'/> </hyperv> you can read about this here: https://wiki.archlinux.org/index.php/PCI_passthrough_via_OVMF#.22Error_43_:_Driver_failed_to_load.22_on_Nvidia_GPUs_passed_to_Windows_VMs
  19. hey guys, you can try following: - go to your BIOS - set the PCIe Gen to Version 2 - boot Unraid - boot your VM This was a solution for me. Now every VM with passthrough is working fine.
  20. you can also install the newest Version of Libreelec manually by using this Guide: http://lime-technology.com/forum/index.php?topic=44683.0
  21. Hey Page3, the correct URL should be http://IP:9981/play/dvrfile/