femin

Should I go with Ryzen or maybe couple E5-2670, that seems to draw a lot of power usage right?

current setup i3 530 4gb ram 8tb hdd plex / sonarr / cp / pydio / couple other dockers it just starting to feel slow. Ideally i want to have this new setup as a ESXi host, run Unraid on VM, then have maybe couple other VMs for labbing and other interesting stuff if the hardware is capable

My Unraid is 7 years old, i3 530, i'm looking to upgrade and got about $600 budget. I need just about everything except for harddrives. really out of touch in the hardware trends, is there any best bang of the buck build for $600

can you tell me what version of unraid your running?, also can you copy and paste the output from command lsmod when run from command line. Update: It didn't work for me through the VPN (I was at work), I got home and it's working fine, Is there way to allow multiple subnets to access the webgui interface? lets say: 1) home subnet 2) vpn client subnet

dude you might wanna remove the log and change your VPN service password. It's in plaintext

Samething I just pulled the latest image and unable to open webgui I did made the recent change as well, LAN_NETWORK 192.168.1.0/24 (my LAN subnet) 2016-02-16 17:10:28,530 DEBG 'start' stdout output: [info] iptable_mangle module not supported, attempting to load... 2016-02-16 17:10:28,532 DEBG 'start' stdout output: [warn] iptable_mangle module not supported, you will not be able to connect to Deluge webui or Privoxy outside of your LAN 2016-02-16 17:10:28,533 DEBG 'start' stderr output: modprobe: FATAL: Module iptable_mangle not found in directory /lib/modules/4.1.15-unRAID

do you see <none> images when you issue "docker images" command? if so, take a look at this: http://www.projectatomic.io/blog/2015/07/what-are-docker-none-none-images/

try: df -h

For the latest update, under Environment Variables Make sure you change LAN_RANGE to LAN_NETWORK

No idea, post how you've got your container folder mappings set up and I'll take a look later tonight when I get home from work... FYI, I just installed it via your template, didn't mess with any other settings that was mentioned in this article: https://pydio.com/en/docs/kb/system/configuring-public-link-pydio-6 plz help me take a look at it volume mapping: http://i.imgur.com/oTazQ6x.png Share Settings in Pydio: http://i.imgur.com/HCqVGaf.png OK, I've never used Pydio and tbh I will not be using Pydio as I have no need for it. We support the container not the underlying application, so I probably won't be able to take this any further than this post. But your share settings in Pydio should not be set as /mnt/user/Pydio/public as in the container there is no /mnt/user/Pydio because it is a mapped folder and you have mapped it to /data Following this logic /mnt/user/Pydio/public should be /data/public. Always remember Linux is case sensitive too. I figured it out, your comment helped. Ty What I found out was there was no 'public' folder inside the 'data' folder, I had to manually create both the 'public' folder and .htaccess file, and edit it per Pydio documentation here https://pydio.com/en/docs/kb/system/configuring-public-link-pydio-6 sharing is working good now. However, i sometimes get "database is locked" error message, i'm using sqlite3, might switch up to mysql later on.

No idea, post how you've got your container folder mappings set up and I'll take a look later tonight when I get home from work... FYI, I just installed it via your template, didn't mess with any other settings that was mentioned in this article: https://pydio.com/en/docs/kb/system/configuring-public-link-pydio-6 plz help me take a look at it volume mapping: http://i.imgur.com/oTazQ6x.png Share Settings in Pydio: http://i.imgur.com/HCqVGaf.png

How to correctly configure the sharing option? http://i.imgur.com/FbsNmz1.png

Yup I was able to get it working after rebooting the UnRaid server. Thank you for that critical piece of advice. I wonder why that step is necessary. Yah I don't know why the restart was needed, it shouldn't be. Glad it worked for you as well.

That was it. thank you!

Can you post a screenshot of the docker edit page of the new settings you want to work? I want to change the default 443 to 4443, 443 is already in use by my firewall VPN login page. I tried to change it twice, and GUI will not display with the new port mapping.