lovswr

Upgraded to 6.12.6 with no issues.

Yes, it is still the same with an incognito window. I also tried using the ip address instead of my server name & still get the same behavoir.

So I spoke too soon. Just white space under Dashboard. All other tabs work. This is in Chrome and Edge. IF I stop/start the server, it will work, until I navigate away from Dashboard, but when I come back, just white screen.

Was on 6.11.4. Upgraded to 6.12 wiht no problems. Then about 24 hours later, my Dashboard just showed a white screen (I use chrome). Upgraded to 6.12.1, just now, & dashboard is back. No problems with unRAID running with either version.

Thanks, Squid!

unraid v 6.9.2. Never seen an alarm anythng like this. Fix Common Problems' suggestion seems so dire. Told me to post diagnostics and ask for help, immediately. So here I am. TAI valhalla-diagnostics-20220123-1406.zip

I'm at my wits end. I have been having trouble with my docker for 2 or 3 months. Mainly, the running dockers just stop & the error is typically the docker image is either full or corrupted. I have done some of the things posted in this very thread such as deleting the image completely & changing the size. This helps for a few days but then it will just crash again. I keep the image on my 1 TB ssd cache & I have run tests on that drive that say it is ok. I just don't know what else to do. Docker was running fine last night & now this morning it has crashed. Diagnostics attached. valhalla-diagnostics-20211128-0642.zip

Just wanted to say I just upgraded to 6.9.2 with no problems. I never had a password for root (or any of my other selves as users) but I set one (for root & one user) just before I upgraded. Whole process took about 7 minutes or so.

I upgraded to 6.9.0 by first backing up my flash & then just hitting the yellow banner that told me there was a new version of unRAID available. Then I hit 'REBOOT' at the bottom of the screen. After about 10 minutes I noticed that PLEX had not come back online. I specify a static ip address for my unRAID server & when I checked my routers LAN status page it was not there. I went to my little "server closet" & it was still running. I hit the power button one time & it shut off immediately. At first this alarmed me, but I realized that the reboot command had stalled at just before, you know rebooting the server. Hit the power button again & she booted right up.

Thanks for this quick fix. I set speedtest to run at 0300 every night. Just noticed it was not working. This is why this forum/unRAID is the best.

I have the exact same problem. I went out of town, for a funeral, last Friday & tried to access Plex remotely. It failed. Got home yesterday (Sunday) & docker says it is running, but I cannot access via desktop nor via any of the local clients in my house. I'm using the linuxserver version & I uninstalled & installed the binhex version. Now desktop access works, but I really like the linuxserver version so I uninstalled binhex & went back to limuxserver. Same problem returned. Nothing changed on my network or unRAID server as I was not even home when this problem started. Same ports are forwarded through my firewall.

Well this was really bugging me so I kept at it. I swapped the LSI controller card for the spare I have on hand. Still the same symptom. This morning, I took the case apart. Since my drive bay enclosures are for SATA drives, they have SATA power connectors. I have a modular PS & I was using MOLEX connectors with MOLEX to SATA adapters. I removed the adapters & am running SATA cables straight from the PS. Rebooted & the rebuild is running at about 172.5M/s as I type these words. I really hope that fixes my problem.

So, itimpi since you gave me direction to investigate, this is what i did: I have this Mediasonic 4-disc drive bay holding 3 discs, including the aforementioned disk1. It is vertically orientated & sits at the top of my case. Just beneath it is a 5-disc drive bay holding 4 discs that is horizontal in nature. Both are connected to a LSI 8-port controller. First I shutdown & checked/reseated all SATA connectors & power leads. Rebooted & I got rebuild speeds of mid 50M for about 15 minutes, then it tricked back down to less than a k & the log showed the same errors as before. Shutdown again & completely frogged the SATA cables; that is to say I unplugged the 4 cables from the Mediasonic drive bay & plugged those cables into the other drive bay & vise-versa. This time I got acceptable speeds for about 30 minutes, then, again, it made its way back to sub 1000 B/sec. After I thought about this some, I realized that all of my drive failures over the last 2 years or so have come from drives installed in the Mediasonic drive bay. I have a second Mediasonic bay that I am going to install to see if that is the issue. I have a Corsair 750W PS which is less than a year old & I believe it sufficient to power 7 SATA drives, one USB jump drive, & about 5 fans. However, all the drives are essentially coming from one "rail" on the PS so I will have to divvy that up better.

unRAID v 6.71 - Had a drive fail, so replaced it with a new one. The rebuild rate is 809 KB/sec or 59 days for an array consisting of 6 4TB drives & 1 parity drive. I then looked at the log & thought my Parity drive was also failing. However, after looking through the forums here, I have concluded that I have no idea what is wrong. So I have included my diagnostics. Thanks in advance.valhalla-diagnostics-20191205-2244.zip

Just wanted to say that my old APC Back-UPS 550 finally bit the dust. I had it for over 5 years & the battery has been replaced once. I just bought a new APC Back-UPS 1100 & made no changes to apc-deamon. It appears to be working just fine.