bdydrp

Thanks Thought i would ask anyway Cheers

Is it possible within this docker container to run early access versions like 7.5.169? I have an open ticket about the topolgy of my network because it shows my switch is uplinked from an AP, which it is clearly not. They have suggested to run the early access version, so just asking if its possible, if not, all good Cheers

After reading about some call trace issues, ive folowed other guides to seperate docker containers on their own interface And since i have a quad port installed, i thought i could set up 1 interface of for my IOT and 1 for CCTV This is my network settings page And my docker settings: Ive removed my VM and reinstalled, but now i cant select eth1 as my network source in vm config The only option to select is virbr0 any pointers Cheers tower-diagnostics-20230729-1650.zip

Are you using influxdb2 with flux query?

Downgraded unraid and all works normally again.. Something in the latest os breaks grafana.... need to try and sort out what!!

Anyone else have an issue with grafana starting, after upgrading OS to 6.11.1? Edit: got it starting again by removing --user 99:100 from extra parameters! Now tho, grafana wont connect to influxdb. All settings within grafana/ influx are the same as they were before upgrading unraid

Where do i find extended logs of Node Red?? My NR container stopped, and the logs from the webui dont go back far enough.. Any one have any suggestions on how i can get a notiifcation when NR stops?? Thanks

Hi All, I was wondering if there is a way i can get a notifiation when one of my docker container stops? I already use telegram notifications for unraid system notifcations - so adding to this would be great. Thanks

Yes.. Thats another possibility ! Cheers

Not sure if i should post this in this mqtt thread or Nginx Proxy Manager thread, but since i have NPM woking for other proxys, i thought i would start here What i would like to do is be able to reach my mqtt broker form outside my local network. I have a duckdns name set..eg. mymqtt.duckdnsorg In NPM have a a host a ssuch But on my phone or nodered i cant access my mqtt broker Is this possible to achieve? I know i can leave my vpn running 24/7 on the phone, and just access it that way. but i'm looking for a different solution so i dont have to do that on my wifes phone Cheers

Thanks Well, im well and truly stumped aswell!!! Just for my sanity. /CCTV is a 2 disk cache pool when passing this through to the VM, the only way is to specify /mnt/cctv in the 2nd vdisk slot in the template, which will automatically create vdisk2.img?

ok - going to have to revive my thread as now the drive almost full acording to unraid - still have ~945gb free in windows I have tried the scsi option again but cant install driver from within device manager I have added the 'unmap' option within the xml <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback' discard='unmap'/> <source file='/mnt/cctv/Windows 10/vdisk2.img' index='3'/> NOt sure where else/what else to do here now? Would changing from Raw to qcow2 be of any use? if so, how do i go about this Cheers all

No worries! - Thanks for trying. Because the disk in not "thin provisioned", is this why unraid shows different disk usage to the VM?

OK - Removed VM and started form scratch. Here is my XML ```<?xml version='1.0' encoding='UTF-8'?> <domain type='kvm' id='10'> <name>Windows 10</name> <uuid>3478ddfa-c348-a835-863f-073d6505593b</uuid> <description>BlueIris CCTV</description> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>2621440</memory> <currentMemory unit='KiB'>2621440</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>4</vcpu> <cputune> <vcpupin vcpu='0' cpuset='4'/> <vcpupin vcpu='1' cpuset='10'/> <vcpupin vcpu='2' cpuset='5'/> <vcpupin vcpu='3' cpuset='11'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-i440fx-5.1'>hvm</type> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough' check='none' migratable='on'> <topology sockets='1' dies='1' cores='2' threads='2'/> <cache mode='passthrough'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/cache/domains/Windows 10/vdisk1.img' index='4'/> <backingStore/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <alias name='virtio-disk2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback' discard='unmap'/> <source file='/mnt/cctv/Windows 10/vdisk2.img' index='3'/> <backingStore/> <target dev='hdd' bus='scsi'/> <alias name='scsi0-0-3'/> <address type='drive' controller='0' bus='0' target='0' unit='3'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/cache/isos/Windows 10 Pro x64 en-US Activated.iso' index='2'/> <backingStore/> <target dev='hda' bus='ide'/> <readonly/> <boot order='2'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/cache/isos/virtio-win-0.1.208.iso' index='1'/> <backingStore/> <target dev='hdb' bus='ide'/> <readonly/> <alias name='ide0-0-1'/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <alias name='usb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <alias name='usb'/> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <alias name='usb'/> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <alias name='usb'/> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'> <alias name='pci.0'/> </controller> <controller type='ide' index='0'> <alias name='ide'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='sata' index='0'> <alias name='sata0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </controller> <controller type='virtio-serial' index='0'> <alias name='virtio-serial0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </controller> <controller type='scsi' index='0' model='lsilogic'> <alias name='scsi0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:dc:4d:93'/> <source bridge='br0.10'/> <target dev='vnet0'/> <model type='virtio-net'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/0'/> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/0'> <source path='/dev/pts/0'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/domain-10-Windows 10/org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0' state='connected'/> <alias name='channel0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <alias name='input0'/> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'> <alias name='input1'/> </input> <input type='keyboard' bus='ps2'> <alias name='input2'/> </input> <graphics type='vnc' port='5900' autoport='yes' websocket='5700' listen='0.0.0.0' keymap='en-us'> <listen type='address' address='0.0.0.0'/> </graphics> <video> <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='dac' relabel='yes'> <label>+0:+100</label> <imagelabel>+0:+100</imagelabel> </seclabel> </domain> Windows still cant find driver! So now, not really sure what im doing wrong!!

hmmmmm - i still get sam error Perhaps, ill remove the vm and start form scratch