prostuff1

Moderators
  • Content count

    6309
  • Joined

  • Last visited

Community Reputation

0 Neutral

About prostuff1

  • Rank
    Advanced Member

Converted

  • Gender
    Undisclosed
  • URL
    http://www.greenleaf-technology.com
  • Personal Text
    Greenleaf Technology
  1. The linked post above is from Limetech so you should be fairly confident in the information provided there. There is no 100% gaurentee that it will not change in the future but for now everything works as you would like. Limetech has been pretty understanding about the users needs/wants/desires.
  2. Ditto for me as well. I rarely restart my dedicated Crashplan box so it is not a huge deal for me but it is a little annoying.
  3. Just a quick thanks and point in the right direction. I was able to get the USB 3.0 card stubbed out and passed into the Windows 7 VM. Once there a driver installed made it show right up and work without an issue. Thanks!!
  4. Sounds good and thanks for the point in the right direction. When I get off of work I will take a stab at it and let you know how it goes.
  5. Hello all, Looking for some guidance and help in getting a PCIe USB 3.0 card passed through to a Windows 7 VM. The card in question is this bad boy made my mediasonic. Bus 1 --> 0000:00:1a.0 (IOMMU group 4) Bus 001 Device 004: ID 13fe:3123 Kingston Technology Company Inc. Verbatim STORE N GO 4GB Bus 001 Device 003: ID 0557:2221 ATEN International Co., Ltd Winbond Hermon Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 2 --> 0000:00:1d.0 (IOMMU group Bus 002 Device 003: ID 1bcf:0c31 Sunplus Innovation Technology Inc. SPIF30x Serial-ATA bridge Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 3 --> 0000:03:00.0 (IOMMU group 2) Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 4 --> 0000:03:00.0 (IOMMU group 2) Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub IOMMU group 0 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/Ivy Bridge DRAM Controller [8086:0158] (rev 09) IOMMU group 1 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) 00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0155] (rev 09) [RESET] 01:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (re v 03) [RESET] 02:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (re v 02) IOMMU group 2 00:06.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:015d] (rev 09) [RESET] 03:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller [1912:0015] (rev 02) IOMMU group 3 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:16.1 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #2 [8086:1c3b] (rev 04) IOMMU group 4 [RESET] 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 0 5) IOMMU group 5 [RESET] 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) IOMMU group 6 [RESET] 00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [8086:1c1c] (rev b5) IOMMU group 7 [RESET] 00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5) IOMMU group 8 [RESET] 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 0 5) IOMMU group 9 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5) [RESET] 07:03.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 [102b:0532] (rev 0a) IOMMU group 10 00:1f.0 ISA bridge [0601]: Intel Corporation C204 Chipset Family LPC Controller [8086:1c54] (rev 05) [RESET] 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) IOMMU group 11 [RESET] 05:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3] IOMMU group 12 [RESET] 06:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3] Window VM XML <domain type='kvm'> <name>Windows 7</name> <uuid>f9232898-ac1a-b0ab-9417-3d980469ad88</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 7" icon="windows7.png" os="windows7"/> </metadata> <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>2</vcpu> <cputune> <vcpupin vcpu='0' cpuset='3'/> <vcpupin vcpu='1' cpuset='7'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-2.5'>hvm</type> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor id='none'/> </hyperv> </features> <cpu mode='host-passthrough'> <topology sockets='1' cores='1' threads='2'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/vms/Windows 7/vdisk1.img'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'/> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:c3:73:f5'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <source mode='connect'/> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' websocket='-1' listen='0.0.0.0' keymap='en-us'> <listen type='address' address='0.0.0.0'/> </graphics> <video> <model type='cirrus' vram='16384' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x1bcf'/> <product id='0x0c31'/> </source> </hostdev> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </memballoon> </devices> </domain>
  6. I am running 6.2.4 on my server and I have no problem accessing my shares on 2 libreelec boxes. No windows 10 on the network to test with so can't comment on that part. The Libreelec boxes have no problem what so ever.
  7. Yes, you should be fine using more than 8 in your system
  8. I have just moved to unRAID 6 on my main machine... yeah I know I am behind the times. It was mostly an "if it aint broke don't fix it" kind of situation. Anyway, I have a windows 7 vm set up and running. I am trying to get a SATA connect optical drive connected to the Windows VM. I have tried a couple of things but can't seem to get it to work. Below are my configs... if I missed some let me know PCI Devices 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/Ivy Bridge DRAM Controller [8086:0158] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) 00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0155] (rev 09) 00:06.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:015d] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:16.1 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #2 [8086:1c3b] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [8086:1c1c] (rev b5) 00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5) 00:1f.0 ISA bridge [0601]: Intel Corporation C204 Chipset Family LPC Controller [8086:1c54] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 03) 02:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 02) 03:00.0 SCSI storage controller [0100]: HighPoint Technologies, Inc. RocketRAID 230x 4 Port SATA-II Controller [1103:2300] (rev 02) 05:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3] 06:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3] 07:03.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 [102b:0532] (rev 0a) IOMMU Groups /sys/kernel/iommu_groups/0/devices/0000:00:00.0 /sys/kernel/iommu_groups/1/devices/0000:00:01.0 /sys/kernel/iommu_groups/1/devices/0000:00:01.1 /sys/kernel/iommu_groups/1/devices/0000:01:00.0 /sys/kernel/iommu_groups/1/devices/0000:02:00.0 /sys/kernel/iommu_groups/2/devices/0000:00:06.0 /sys/kernel/iommu_groups/2/devices/0000:03:00.0 /sys/kernel/iommu_groups/3/devices/0000:00:16.0 /sys/kernel/iommu_groups/3/devices/0000:00:16.1 /sys/kernel/iommu_groups/4/devices/0000:00:1a.0 /sys/kernel/iommu_groups/5/devices/0000:00:1c.0 /sys/kernel/iommu_groups/6/devices/0000:00:1c.6 /sys/kernel/iommu_groups/7/devices/0000:00:1c.7 /sys/kernel/iommu_groups/8/devices/0000:00:1d.0 /sys/kernel/iommu_groups/9/devices/0000:00:1e.0 /sys/kernel/iommu_groups/9/devices/0000:07:03.0 /sys/kernel/iommu_groups/10/devices/0000:00:1f.0 /sys/kernel/iommu_groups/10/devices/0000:00:1f.2 /sys/kernel/iommu_groups/10/devices/0000:00:1f.3 /sys/kernel/iommu_groups/11/devices/0000:05:00.0 /sys/kernel/iommu_groups/12/devices/0000:06:00.0 SCSI Devices: [0:0:0:0] disk Verbatim STORE N GO 5.00 /dev/sda 8.00GB [4:0:0:0] cd/dvd MATSHITA BD-MLT UJ240AS 1.01 /dev/sr0 - [5:0:0:0] disk ATA Hitachi HDS5C302 A580 /dev/sdg 2.00TB [5:0:1:0] disk ATA Hitachi HDS72202 A20N /dev/sdh 2.00TB [5:0:2:0] disk ATA ST2000DM001-9YN1 CC4C /dev/sdi 2.00TB [5:0:3:0] disk ATA ST2000DM001-9YN1 CC4C /dev/sdj 2.00TB [5:0:4:0] disk ATA Hitachi HDS72202 A20N /dev/sdk 2.00TB [5:0:5:0] disk ATA ST2000DL003-9VT1 CC32 /dev/sdl 2.00TB [6:0:0:0] disk ATA CT960BX200SSD1 .6 /dev/sdb 960GB [7:0:0:0] disk ATA CT960BX200SSD1 .6 /dev/sdc 960GB [9:0:0:0] disk ATA SAMSUNG HD103UJ 1113 /dev/sdd 1.00TB [10:0:0:0] disk ATA ST31000333AS CC1F /dev/sde 1.00TB [11:0:0:0] disk ATA ST6000DX000-1H21 CC48 /dev/sdf 6.00TB [12:0:0:0] disk ATA ST32000542AS CC34 /dev/sdm 2.00TB [12:0:1:0] disk ATA HGST HMS5C4040AL A580 /dev/sdn 4.00TB [12:0:2:0] disk ATA ST31500341AS CC1H /dev/sdo 1.50TB [12:0:3:0] disk ATA ST4000DM000-1F21 CC51 /dev/sdp 4.00TB [12:0:4:0] disk ATA ST31500341AS CC3G /dev/sdq 1.50TB [12:0:5:0] disk ATA WDC WD10EADS-00L 1A01 /dev/sdr 1.00TB The above Matshita drive is the one I would like to get passed into the Windows 7 VM. It is on the HighPoint Technologies, Inc. RocketRAID 230x 4 Port SATA-II Controller listed in the PCI Devices section above. It is the only thing on that card so I guess I could pass that card through if need be. Passing through the card is actually what I am trying to do right now but I would prefer to just pass the optical drive itself. Below is the XML config for the VM. <domain type='kvm'> <name>Windows 7</name> <uuid>f9232898-ac1a-b0ab-9417-3d980469ad88</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 7" icon="windows7.png" os="windows7"/> </metadata> <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <memoryBacking> <nosharepages/> <locked/> </memoryBacking> <vcpu placement='static'>2</vcpu> <cputune> <vcpupin vcpu='0' cpuset='6'/> <vcpupin vcpu='1' cpuset='7'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-2.5'>hvm</type> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor id='none'/> </hyperv> </features> <cpu mode='host-passthrough'> <topology sockets='1' cores='1' threads='2'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/vms/Windows 7/vdisk1.img'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/vms/isos/virtio-win-0.1.118-2.iso'/> <target dev='hdb' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'/> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:c3:73:f5'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <source mode='connect'/> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' websocket='-1' listen='0.0.0.0' keymap='en-us'> <listen type='address' address='0.0.0.0'/> </graphics> <video> <model type='cirrus' vram='16384' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </hostdev> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </memballoon> </devices> </domain>
  9. Just updated my unRAID crashplan machine to unRAID 6.2.1 and the crashplan docker. I was able to get it installed and running without to much issue. I am having one problem however. Whenever crashplan is running and I try and do a parity check it is ungodly slow. I go from 127 to about 30 for a full parity check. As soon as I stop the Crashplan docker from running the parity speed will pick back up. I am running this on an older HP ProLiant N40L Microserver with 4GB of RAM. It use to be running unRAID 5 with a crashplan plugin and I did not have any of these speed issues with parity while crashplan was running. I don't want to go back to unRAID 5 and a plugin so any pointers or suggestions would be much appreciated. I will be trying the unRAID tunables tester script with the crashplan docker running and see what I come up with but figured I would through this out there in case anyone has seen this before.
  10. going to need to see a log file or how you have your settings to be of much help. Are the transfers from physical Windows 7 machines? have you tried to shut them down and reboot them?
  11. shut the server down and pull the USB drive. Run checkdisk on it via a Windows machine. Put the usb back in the unRAID machine and see what happens.
  12. Can confirm there is no issue with creating a Windows 7 VM in unRAID 6.2 that I can find. I was able to install Windows 7 just fine right now on a test machine. No errors. Chances are you have corrupt installation media or something amiss with your hardware. If the VM enters a paused state, it could also be because of insufficient disk space on the underlying storage device. Jonp- it might be worth adding a note to the VM documentation to use the above mentioned Cirrus VNC instead of QXL. I could not get Windows 7 installed using QXL
  13. For windows 7 do not use the QXL VNC video, use the Cirrus. https://lime-technology.com/forum/index.php?topic=52359.0
  14. That is a bug, you have to have at least data disk assigned to array: http://lime-technology.com/forum/index.php?topic=52227.msg503222#msg503222 Working on get the 6.2.1 release out now.... OK, kind of figured I needed a drive assigned to the array. Kind of wish I could start the array to get the cache drives mounted so I could set up dockers and VM's without needing any other drives assigned. No huge skin off my back though so long as the bug of being able to start the array is squashed!! Thanks.
  15. Installing and setting up a couple of servers for a customer and came across a bug/issue on one of them. The log is attached where this is happening but the steps for me to reproduce on this machine is: 1) Start the machine 2) Change cache drive number to 2 3) Assign 2 960GB SSD to the cache positions 4) Start the array and it errors This ends up hanging the web interface and I was able to get in via telnet and get the log. If you need any other information let me know! EDIT: OK, so it appears this happens on both machines if you only assign cache drive(s). Might want to take a look into that guys as I was hoping to assign some cache drives and get some apps and VM's set up without having any other drives currently assigned (They are - all 16 of them - are currently being precleared) log.txt
Copyright © 2005-2017 Lime Technology, Inc. unRAIDĀ® is a registered trademark of Lime Technology, Inc.