teamhood

You all were spot on. I used a Molex to SATA power adapter and both drives powered right up! THANK YOU!

I know that the 14TB is shucked (I did it myself), but I don't know about the 10TB. I'm not familiar with the 3rd pin, but I will research to see what I learn. I didn't think it was a power issue as using the same power and sata cable for the working 14TB.

tower-diagnostics-20211202-1946.zipAll - I'm a bit perplexed at this one and I'm at the end of my rope as I can't figure it out. I'm going through a pretty big server upgrade, which began with adding larger hard drives to begin shrinking my array from 25 drives to 10. I upgraded both parities to 14TB and everything was going fine. I began doing some research as I was still on Reiser File system, 8+ year old mobo/cpu, marvel controllers, etc and made the decision to do an upgrade. My plan was to use my HP Micro NL40 and rsync all the data from my current array onto larger drives formatted to XFS, using unraid trial, while planning for new hardware, then migrate the hard drives from the NL40 over to new hardware and be happy that it was done. Something weird has happened with a 14TB drive and a 10TB drive. The 14TB drive was previously my 2nd parity drive, but I needed to use it as a data drive. Once I unassigned that drive from my original array I could not get it pop in the BIOS. I tried to switch it between onboard SATA from the Supermicro cards, but I couldn't get to work. I know the drive isn't bad as I put it into a USB and no issues. I also had a 10TB drive that was part of that system and the same thing happened. I figured this could because of the Supermirco cards, so I ordered the LSI cards, but couldn't get either to work on the new LSI cards. I ended up putting them both into my NL40 and no issues. I chalked it up to a bug, old hardware, who knows. Well, there is something more now going on as all my new hardware came in and I built the new server and these two drives won't be detected by the new motherboard nor the LSI cards. I checked all cables, power supply connectors, etc. I just popped them both back into the NL40 and again, no issues. I'm not sure what to do because this doesn't make sense. Why can't 2 mobo's detect these drives, but my old trusty NL40 has no problem? Anything I could post that might help? Anyone have any idea on what the heck could be happening? Any help would be much appreciated.

I'm setting up my first UniFi AP and Controller. I grabbed the LTS (latest stable) version. Used Bridge mode. Default IP's. I run pfSense as my router/firewall. Anything special I need to do? I'm stuck on adopting the AP. I ssh'd into the AP and reset it, but I can't seem to get it adopt. Any recommendations?

This looks great and is on my to-do list. Following!

Phaze - First, thank you for everything. I've been using the SubSonic plugin from you for a few months. I've run into issue where is just stops working and I assume being a longtime SubSonic user is that I need to increase the allotted memory to SubSonic. Previously I would bump it up to 1 or 2Gb and it would help stop the random freezing for the large library that I have. If there any chance you can add that to the config page?

Hey Guys - What is the new controller card to get these days to use with the SuperMicro X10SL7? I'm going to be building a new unRAID server and I'm doing it from ground up and then putting old server offsite. Thank you,

Check out this thread that I started a few years ago. There is some great information on rsync configuration and I even go step by step how to add. http://lime-technology.com/forum/index.php?topic=13432.30

Well, I think you're correct about it being 'Mover'd' I have /mnt/cache/apps directory create on my Cache drive. I never used the cache drive before... and I think it's moving all the shares. How do I make my 'apps' share remain on the cache drive and not get moved over via the Mover?

Hey all - I had Subsonic up and working and twice now I get the following error when heading to the loading page: HTTP ERROR: 404 /WEB-INF/jsp/login.jsp RequestURI=/WEB-INF/jsp/login.jsp Powered by Jetty:// Last time I had to remove everything, reboot, reinstall to get it back working. Log: *** Running /etc/my_init.d/config.sh... Current default time zone: 'America/Chicago' Local time is now: Tue May 19 21:32:20 CDT 2015. Universal Time is now: Wed May 20 02:32:20 UTC 2015. *** Running /etc/rc.local... *** Booting runit daemon... *** Runit started as PID 29 May 19 21:32:22 unraid syslog-ng[37]: syslog-ng starting up; version='3.5.3' May 19 22:17:01 unraid /USR/SBIN/CRON[182]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) May 19 23:17:01 unraid /USR/SBIN/CRON[297]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) May 20 00:17:01 unraid /USR/SBIN/CRON[400]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) May 20 01:17:01 unraid /USR/SBIN/CRON[509]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) May 20 02:17:02 unraid /USR/SBIN/CRON[616]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) May 20 03:17:01 unraid /USR/SBIN/CRON[719]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) May 20 04:17:01 unraid /USR/SBIN/CRON[823]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) May 20 05:17:01 unraid /USR/SBIN/CRON[928]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) May 20 06:17:01 unraid /USR/SBIN/CRON[1035]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) May 20 06:25:01 unraid /USR/SBIN/CRON[1048]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ))

Wow. I just upgraded from 5rc12 to 5.0.6 to 6.0rc2... Been a user since 2004ish?... this is really amazing work fellas. Signed, Home User with little Linux/Network background.

Easy fix... I originally installed unRAID 5.0-beta using a PC. I tried to do the upgrade via osX and that was creating some weirdness on the previous formatting via PC. So I went and dusted my old XP box off and was able to upgrade to 5.0.6 and then to 6-rc1 Thank you.

Fantastic that this thread is still alive. Using it again and I forgot how I did this Thanks to the update by @wolferI99

Hey All - Well it's been about 2-3 years of a perfect working system and the upgrade bug finally bit me. I wanted to upgrade to v6RC1, but figured I should get to 5.0.6 stable first as I've been riding 5rc12 for so long. I followed the upgrade directions from the wiki: 5.0-rc9 through 5.0-rc16c Prepare the flash: either shutdown your server and plug the flash into your PC or Stop the array and perform the following actions referencing the flash share on your network: Copy the files bzimage, bzroot, and syslinux.cfg from the zip file to the root of your flash device, overwriting the same-named files already there. Reboot your server. Once boot-up has completed, you should see "Stopped. Configuration valid." array status with all disks assigned correctly. Some users have reported having to re-run 'make_bootable' script on the flash. I pulled my USB drive, plugged into Mac, copied over files, ran Make_bootable. My array stops at a SYSLINUX prmopt after loading the SAS controller cards. I confirmed that USB is set to boot and priority. I removed all package/unmenu/etc from USB What should I do? I did backup everything on my flash prior to playing around... Thank you, Mike

Thanks Joe, Love it!