rukiddin

I had a problem like this once, it turned out to be the power supply. Just that 1 extra drive, and things didn't work right. Beefed up the power supply and I was able to move on. Good luck

I've been using Nextcloud on my Unraid server uneventfully for the last couple of years. I recently realized it wasn't working. I get the following screen message when I try to access it locally: Internal Server Error The server encountered an internal error and was unable to complete your request. Please contact the server administrator if this error reappears multiple times, please include the technical details below in your report. More details can be found in the server log. If I run the command sudo -u abc php /config/www/nextcloud/console.php file:scan --all I get the following: An unhandled exception has been thrown: Doctrine\DBAL\Exception: Failed to connect to the database: An exception occurred while executing a query: SQLSTATE[HY000]: General error: 14 unable to open database file in /config/www/nextcloud/lib/private/DB/Connection.php:87 Stack trace: #0 /config/www/nextcloud/3rdparty/doctrine/dbal/src/Connection.php(1519): OC\DB\Connection->connect() #1 /config/www/nextcloud/3rdparty/doctrine/dbal/src/Connection.php(1041): Doctrine\DBAL\Connection->getWrappedConnection() #2 /config/www/nextcloud/lib/private/DB/Connection.php(236): Doctrine\DBAL\Connection->executeQuery() #3 /config/www/nextcloud/3rdparty/doctrine/dbal/src/Query/QueryBuilder.php(345): OC\DB\Connection->executeQuery() #4 /config/www/nextcloud/lib/private/DB/QueryBuilder/QueryBuilder.php(287): Doctrine\DBAL\Query\QueryBuilder->execute() #5 /config/www/nextcloud/lib/private/AppConfig.php(344): OC\DB\QueryBuilder\QueryBuilder->execute() #6 /config/www/nextcloud/lib/private/AppConfig.php(109): OC\AppConfig->loadConfigValues() #7 /config/www/nextcloud/lib/private/AppConfig.php(300): OC\AppConfig->getApps() #8 /config/www/nextcloud/lib/private/legacy/OC_App.php(971): OC\AppConfig->getValues() #9 /config/www/nextcloud/lib/private/Server.php(687): OC_App::getAppVersions() #10 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(160): OC\Server->OC\{closure}() #11 /config/www/nextcloud/3rdparty/pimple/pimple/src/Pimple/Container.php(118): OC\AppFramework\Utility\SimpleContainer->OC\AppFramework\Utility\{closure}() #12 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(127): Pimple\Container->offsetGet() #13 /config/www/nextcloud/lib/private/ServerContainer.php(136): OC\AppFramework\Utility\SimpleContainer->query() #14 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(56): OC\ServerContainer->query() #15 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(182): OC\AppFramework\Utility\SimpleContainer->get() #16 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(160): OC\AppFramework\Utility\SimpleContainer->OC\AppFramework\Utility\{closure}() #17 /config/www/nextcloud/3rdparty/pimple/pimple/src/Pimple/Container.php(114): OC\AppFramework\Utility\SimpleContainer->OC\AppFramework\Utility\{closure}() #18 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(127): Pimple\Container->offsetGet() #19 /config/www/nextcloud/lib/private/ServerContainer.php(136): OC\AppFramework\Utility\SimpleContainer->query() #20 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(56): OC\ServerContainer->query() #21 /config/www/nextcloud/lib/private/Server.php(1064): OC\AppFramework\Utility\SimpleContainer->get() #22 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(160): OC\Server->OC\{closure}() #23 /config/www/nextcloud/3rdparty/pimple/pimple/src/Pimple/Container.php(118): OC\AppFramework\Utility\SimpleContainer->OC\AppFramework\Utility\{closure}() #24 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(127): Pimple\Container->offsetGet() #25 /config/www/nextcloud/lib/private/ServerContainer.php(136): OC\AppFramework\Utility\SimpleContainer->query() #26 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(56): OC\ServerContainer->query() #27 /config/www/nextcloud/lib/private/Server.php(2024): OC\AppFramework\Utility\SimpleContainer->get() #28 /config/www/nextcloud/lib/private/Files/View.php(118): OC\Server->getLockingProvider() #29 /config/www/nextcloud/lib/private/Server.php(435): OC\Files\View->__construct() #30 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(160): OC\Server->OC\{closure}() #31 /config/www/nextcloud/3rdparty/pimple/pimple/src/Pimple/Container.php(118): OC\AppFramework\Utility\SimpleContainer->OC\AppFramework\Utility\{closure}() #32 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(127): Pimple\Container->offsetGet() #33 /config/www/nextcloud/lib/private/ServerContainer.php(136): OC\AppFramework\Utility\SimpleContainer->query() #34 /config/www/nextcloud/lib/private/AppFramework/Utility/SimpleContainer.php(56): OC\ServerContainer->query() #35 /config/www/nextcloud/lib/private/Server.php(1387): OC\AppFramework\Utility\SimpleContainer->get() #36 /config/www/nextcloud/lib/base.php(594): OC\Server->boot() #37 /config/www/nextcloud/lib/base.php(1089): OC::init() #38 /config/www/nextcloud/console.php(48): require_once('/config/www/nex...') #39 {main}root@ed996750eaf9:/# cd /config/www/nextcloud Can someone point me in the direction of what I can do to fix this? My MySQL skill is somewhat lacking. I'm hoping it might be a simple permission error. Thanks Mike

I'm also getting this error. I'm still runing UNRAID 6.9.2, I'm running the 9-22-2021 version of the plugin, the error displays at the bottom of every screen. I'm using the firefox in the GUI for Unraid, it's version is 73.0.1. I'll message you the diagnostics. Hope this helps. Love your plugin. Mike

I've got a couple of UNRAID servers, and have been very happy with them. My current configurations are generally built around 8TB shucked drives, mostly Seagate, my parity drive for instance is a Seagate Barracuda (ST8000DM004). I do have a mix of smaller drives thrown in there as well, mostly older 4TB shucked Seagate drives. One of my servers has 9 drives, and the other has 5 drives in the array. Anyhow, once drive prices come back to reality (hopefully in the not too distant future), I'll be upgrading to either 14TB or larger drives. Looking at my Parity Check, it's currently taking 18 hours at a speed of 123mb/s. My parity drive appears to be maintaining a 6.0Gbps link. I want to increase the throughput as much as possible so that I minimize the increase in my parity check time. What are the most cost effective ways of doing this? (Faster SATA controller, better motherboard, SATA cables, etc.) What are other people seeing in terms of their parity check run times? What should I expect a parity check, with a 14TB drive to take in terms of time? speed in mb/s? Thanks Mike

Hey all, This is a little strange. I've been running Windows 10 VM and an Ubuntu VM on the same machine now for about a year, with little to no problems. Recently, the Windows 10 VM is shutting down due to a lack of RAM, and it won't let me restart the VM without restarting the entire server. It almost seems like there is a memory leak. I'm running unraid 6.7.0 (I haven't updated further just because I don't want the performance hit with the new intel code) I have 16GB of ram on the i7 processor server. I can always add more ram, it's just strange to me that it all worked great until recently. I do run a fairly large number of dockers as well. My next step is to eliminate the ones I don't use as much. If anyone else has any ideas, I'd greatly appreciate a nudge in the right direction. Thanks Mike

Seems like the image clip needs to back up a bit before sending the image. I didn't want to choke my cellular by sending so many false positives.. Also, has anyone found a way to eliminate light effect? The biggest movement I get is when a car drives by and it's headlights light up my front door area (the light is the only movement). Causes false triggers all night long. Mike

Is anyone else having any success with getting the motion detection to work reliably? I get lots of notifications of motion, but there is rarely anything in the images that are sent to me. Also, when I deliberately stand in front of the camera and move around, I almost never get anything. thanks Mike

I'm having the same issue. The camera seems to work, and I've got it set to record when motion is detected. I get email notifications regarding motion, but nothing is saved to disk or included in the email. When I look at the config file it appears to have many locations to store various things (like logs), that should be stored in APPDATA but they aren't. Is this container completely functioning? Mike

Not sure if this has been reported.. Seems as though the plugin isn't able to log in to PLEX to check for updates. I'm getting the error: Unable to login to PlexPass with above credentials. I have checked and re-checked the credentials and they are correct, so it's either something with the plugin or something with the PLEX servers. I'm still a plugin guy. At least until Phaze says he's done supporting them. Mike

I have the same questions/concerns. Can someone provide a link or answer the question?

I'm getting the same error message on my terminal after updating.

The version I'm running says the IPV6 issue was already corrected: 21.09.2016: Fix problem introduced with latest gsm update and unraid refusal to support ipv6 18.09.2016: Corrected long standing error with network configuration. 13.08.2016: Rebase to ubuntu xenial. 10.09.2015: Inital release I'm using the new Community Applications plugin to manage the App, so I'd prefer not to go away from that. Mike p.s. thanks for all the help from everyone. I'll get there.

Ok, Just so you know, I've been working with port mappings and the such for nearly 15 years. I understand the concept, and know how they work and why they are necessary. What you are saying isn't making sense to me, but like you said, just do what CHBMB says. Well, reconfiguring plexpy's port mapping from 8181 to say 8381 doesn't change the port that Plexpy is actually using inside the container, which then requires further modifications, which I wasn't ready to committ to, so I just uninstalled it completely, and uninstalled and removed all the folders for TEAMSPEAK, and rebooted the server. So now, I only have TEAMSPEAK, and it's still ACTING exactly like it was before when I had plexpy running. Here are the logs, the current screen shot, on a FRESH install. The key error below to me is that it says 30033 is not an address supported by this protocol. I'm runing UNRAID 6.2 FINAL. 2016-09-25 20:02:45.527683|INFO |ServerLibPriv | |TeamSpeak 3 Server 3.0.13.4 (2016-08-29 12:39:04) 2016-09-25 20:02:45.527851|INFO |ServerLibPriv | |SystemInformation: Linux 4.4.19-unRAID #1 SMP PREEMPT Fri Aug 26 09:47:56 PDT 2016 x86_64 Binary: 64bit 2016-09-25 20:02:45.527902|INFO |ServerLibPriv | |Using hardware aes 2016-09-25 20:02:45.528882|INFO |DatabaseQuery | |dbPlugin name: SQLite3 plugin, Version 3, (c)TeamSpeak Systems GmbH 2016-09-25 20:02:45.528954|INFO |DatabaseQuery | |dbPlugin version: 3.11.1 2016-09-25 20:02:45.529543|INFO |DatabaseQuery | |checking database integrity (may take a while) 2016-09-25 20:02:45.544595|INFO |SQL | |db_CreateTables() tables created 2016-09-25 20:02:45.568498|WARNING |Accounting | |Unable to find valid license key, falling back to limited functionality 2016-09-25 20:02:45.970693|INFO | | |Puzzle precompute time: 387 2016-09-25 20:02:45.971751|ERROR |FileManager | |bind failed on :::30033; reason: Address family not supported by protocol 2016-09-25 20:02:45.971816|CRITICAL|VirtualSvrMgr | |Could not start file manager 258 no network port available

Let me get this straight. I had Plexpy installed and working, it defaults to using port 8181. I installed Teamspeak3 using the same Docker image. What your seeing is just what ports the docker had assigned. When I first installed Teamspeak3, it didn't show any ports being assigned, so I attempted to assign them. I don't see any documentation that shows Teamspeak3 using port 8181 by default anywhere, but I may have missed something. Is that a regular port for Teamspeak3? I will either remove Plexpy or create a new docker if that's the case. Do I need to just start a clean docker image and only install Teamspeak3 on that image? I have ran several dockers on the same image before, I didn't think I needed to do that. Thanks Mike p.s. on my first install attempt, I didn't change anything. (my first screenshot), that's just the way it installed. My second screenshot shows what I attempted to ADD, I haven't changed anything.

Also, i am still confused on where to find the "Use the command line log to get the privilege" Mike