• Content count

  • Joined

  • Last visited

Community Reputation

0 Neutral

About gestrella

  • Rank


  • Gender
  1. Thanks for all your work. These are life savers !
  2. Well, I erroneously did the upgrade and now get kernel panics as start the OSX. Message around DSMOS: SMC read error K0: ...." Any tip or guidance on how to correct ? Thanks in advance.
  3. I just realized after running for a solid week - that the clock drifts and the time get out of sync badly ! After a day running see more than an hour off. I noted different setting on the XML folks using for the clock tag but they don't seem to make any difference. Searching the WWW see some folks refer to this issue, but cant find any fix Any though or ideas ? Thanks, Gus
  4. yes download and unzip this one. its the newest 3974 but patched for qemu.Dont use the offical one its not good on qemu. Then just install package on the vm. So just so don't screw anything - 1. Download the enclosed file referenced above inside the VM to be updated 2. Execute file Clover_v2.3k_r3974.pkg ------------ Ask as so many other files and config unsure if anything else needed to be tweaked. Thanks for all these BTW. they are very useful !!!
  5. For those that used your old guide, any change to post how to upgrade Clover to latest ? I think very simple but would hate to screw something up.
  6. [Support] Watcher (beta app)

    There is also a group in reddit too for the app -
  7. Well just tried it - and all set with the new resolution. I am new to OVMF and KVM - but really liking what it brings to the hankintosh side of things. Thanks for these guides.
  8. gridrunner, works like a champ !!!!! Instead of migrating what i ended up doing was starting fresh. So used a new drive, used 'diskutil list' to ensure that could get the drive id. Then followed all of the steps on the guide - replaced the drive area with the instructions you noted above - and all working like a champ. Only suggestion to the guide is should note on format of the USB, to use GUID Partition and most master boot record. for some reason I missed this and had to redo later THE ONLY thing that have tried to do with no luck is, increase the size of the virtual screen. I do not have a graphics card to pass along (VGA), so just enabled screen sharing to connect. However, shows as 800x600 resolution. I used clover configurator to change on the GUI section, and when restart on the console view it shows garbled but kind off can see it going. On the screen sharing still just see as 800x600 though. Will try some other things and of works will post update. All else working fine. Will do some stress testing but love fact can take drive out, change EFI config (or use a boot one on another system) and will be up and running. This is really Really cool !
  9. Thank you for this guide !!!! I already have a drive with OSX El Capitan and clover installed working on a physical computer. Can I use this guide and use under UNRAID? Any suggestion how to go about it ? Thanks again - greta stuff
  10. I have searched but unable to see if possible OR is yes, how it is done. I want to keep a separate SSD drive dedicated fully for one or two VM. I know I can use the cache drive but rather keep them separate. I also don't want t ouse the array as rather use SSD speed. However, unable to find how to do this . Any help appreciated it - driving me nuts
  11. I have a few ruby scripts that would want to run on a cron job inside a docker. Does such a thing exist ? Seem most dockers are juts apps but would expect something like this is around and I just can't figure it out thanks
  12. [ARCHIVE] binhex docker repository

    Did you ever get a reply to this ? I am testing with tigervpn ( and get exactly the same issue. the messages are continuous ; and no ability to see the gui The opvn config works as can test using a mac openvpn client all fine. At a loss here supervisor.log.txt
  13. How to Implement Trim on SSD Drives

    In which directory is the command at ? I have v6 b12 installed and didn't find it on the usual areas. Regards, Gus
  14. The graphic entry did the trick. Works great so far. On point 3 and expansion of the drive, found a link at that mentioens it is possible this way - Will look to test later this week.
  15. Man, this guys should be pined on the forum. It makes things super easy to install. Only item where was not clear was needed to create the storage drive first on the command line (left comment so hope the guide can be updated) . outside that, follow things and all works great. Have been running all kinds of heavy load and different software with no issues whatsoever. All security upgrades worked great. Installed xcode, a lot of ruby gems and scripts , also little snitch - which was wondering how would work. did ivi, iflicks2 media program fine. Did itunes authentication. copied a lot of files to from other drives . No crash - no slowness - zero off behavior after a full day. Extremely impressed and see as a very workable system for those of us that want to keep an osx server for itunes library serving or media transcoding There are only three things would like to nail before committing fully - 1. Can the screen be changed to something larger ? keep reading some of the other drivers could be an issue so holding up but will test 2. How can a second drive be added ? Seem like doable. WIll need to check some on this 3. Can the current drive used with Yosemite be expanded ? I set for 200G but can see wit some transcoding and so on will need to move to a larger disk at some point. Pretty excited how rock solid this virtualization is. regards, gus
Copyright © 2005-2017 Lime Technology, Inc. unRAIDĀ® is a registered trademark of Lime Technology, Inc.