Yousty

I tried a couple different ethernet cables and ports on my switch (rebooting Unraid each time) but the NIC still isn't working properly. It won't pull an IP address from my router and I keep getting the red text at the bottom of Unraid "Interface Ethernet Port 1 is down. Check cable". Am I just unlucky and have a faulty NIC?

Here you go. nas-diagnostics-20230630-1149.zip

I have an ASRock X370 Professional Gaming motherboard with a built-in AQUANTIA 5 Gigabit LAN NIC. The problem is Unraid doesn't seem to recognize it. If I plug an ethernet cable into it neither of the network activity LEDs turn on. Do I have to manually install a driver? I'm running Unraid 6.11.5. Thank you!

Sold to Whaler_99. Smooth transaction!

Final Price Drop. Pricing these to sell because I feel bad that I have 64TB of storage just sitting here that could be put to use by somebody. $500 for all 64TB ($7.81 per TB!) w/ free shipping in the US.

Just upgraded to 16TB HDDs so no longer have need for these. Most have only seen a few hour spin up time in my NAS each day. They have all just been zeroed and successfully precleared and ready to put in an array. $700 $600 $500 for all 64TB ($7.81 per TB!) w/ free shipping in the US. They're all packaged up in custom HDD foam and ready to ship w/ tracking provided. Model #s: 5 x Seagate ST8000DM004 3 x Seagate ST8000AS0002 See this post for my previous sale with positive feedback.

I assumed that as well but wanted confirmation from some other more experienced people before I initiated an RMA. Thank you!

I recently got a bunch of new hard drives and was preclearing them when one of them failed early in the post-read. I've done dozens of preclears and never had a preclear fail, so I was hoping for some suggestions on how to proceed? Thank you! preclear_disk_ZL24A79Y_23305.txt ST16000NM001G-2KK103_ZL24A79Y-20220415-1630.txt

Just upgraded to 16TB HDDs so no longer have need for these. I bought all of them new and most have only seen a couple hour spin up time in my NAS each day. Never had any errors reported in Unraid with any of them and all have just been zeroed and successfully precleared. $90 $80 for both drives w/ free shipping in the US Model #s: Seagate ST4000DM000, Date: 13226 Seagate ST4000DM000, Date: 13416 See this post for previous sale with positive feedback preclear_report_Z3002190_2022.04.03_21.25.44.txt preclear_report_W3005LFH_2022.04.03_21.52.22.txt

THANK YOU! THANK YOU! THANK YOU! THANK YOU! After going into BIOS and setting "Power Supply Idle Control" to "typical current idle" and disabling C-states, Unraid has been running without any issues for the last 48 hours. Updating my BIOS must have triggered this issue because it had been running fine without changing those settings for years before updating BIOS.

It just did it again after being stable for 4 hours, but this time I was booted into safe mode. Here are the logs: nas-diagnostics-20220318-2035.zip syslog

It just happened again. Here is another diagnostics log and syslog. Any help would be greatly appreciated, I'm pulling my hair out with frustration. Thank you. nas-diagnostics-20220318-1158.zip syslog

My Unraid server has worked perfectly for the last several years but then my nvme cache drive completely failed overnight. I replaced the cache drive and restored it with CA Backup/Restore, but ever since then my server has been restarting itself after being on a couple hours and then a couple hours after that it will completely freeze up (can't access via GUI and even local access is frozen, can't type anything). I'll have to hard restart to bring it back online but it will just do the same thing again after a couple hours, even if I disable all dockers. I reseated the ram and ran a memtest and it passed with 0 errors and I reseated all of the hard drive power and sata cables but I can't figure out what is going on. Can anybody please look at my log and see if anything catches your eye? This was taken right after it restarted itself and automatically began a parity check. nas-diagnostics-20220317-2251.zip

Using Unraid 6.9.2 and my cache drive completely stopped responding and is officially dead. I have successfully replaced the cache drive and all of the docker/appdata via the CA Backup/Restore app, which also backed up my libvirt.img which I was using to run a Windows 10 VM off of an unassigned drive. I turned off VM manager and placed the libvirt.img backup file in cache/system/libvirt where it was before and then turned VM manager back on but when I go to the VM tab I get "Libvirt Service Failed to Start." Can somebody PLEASE help me restore my VM? I'm relatively amateur when it comes to VMs and used a guide years ago to set mine up, so I'm not sure what I may be missing.

Last night my cache drive completely stopped responding and is dead. I have successfully replaced the cache drive and all of the docker/appdata via the CA Backup/Restore app, which also backed up my libvirt.img which I was using to run a Windows 10 VM off of an unassigned drive. I turned off VM manager and placed the libvirt.img backup file in cache/system/libvirt where it was before and then turned VM manager back on but when I go to the VM tab I get Libvirt Service Failed to Start. Can somebody PLEASE help me restore my VM? I'm relatively amateur when it comes to VMs and used a guide years ago to set mine up.