nmotion96

Will look into upgrading. Everything is up and running again. Thanks a lot.

I had single parity. I dunno which disk it is

I cut the power to the server on accident. When it restarted all the disk shows as unassigned. How would I fix this? I have attached the diagonostics and syslog. I'm using unraid 6.1.5. Thanks for any help. tivi-diagnostics-20181120-2107.zip tivi-syslog-20181120-2121.zip

So it would be safe to put the 2 2tb drive back in and start it up? Wouldn't it show up as a new drive? First set a New Config. Then assign any desired drives and build parity. Use the original 2T drives. thanks a lot that totally worked.

So it would be safe to put the 2 2tb drive back in and start it up? Wouldn't it show up as a new drive?

So i would have to fix the corruption first? so it is ok too hook the drive up to another computer and run reiserfsck --rebuild-tree

I plugged it into a computer running backtrack linux, and was able to see all my files on there. How would I check to see if I have any file system corruption? Ok i'll take a look at the wiki and try that. After I mount the drive it would show up in the unraid menu right?

I pulled the 2tb disk2 and 2tb disk6 and plugged it into another computer and all my data seem to be still on it. I'm in the process of upgrading all the 2tb disk to 3tb. Would it be a bad idea to just pull all the 2tb and put 3tb disk in and copy all the data back on instead of trying to fix the problem I currently have?

I put the drive into a usb enclosure and booted it up but don't see the drive in unraid. I just plug it into any usb port right?

Do you mean you don't have any bays to mount it in, or you don't have any SATA ports to connect it to? Both I have no more space in the case and also no more free sata port

I don't have any extra spot to put the disk6 in. Can I just hook it up to another computer and see if I can access it?

I still have both disk. Yes I saw that disk6 red ball and had error during the parity sync but when I rebooted show unformatted so I was thinking that I can fix it but putting a new larger disk in. So I just need to run reiserfsck --rebuild-tree on disk2 also?

I was in the process of upgrading disk 2 from a 2tb disk to a 3tb disk. The rebuild completed so i started a parity check. The parity check started to show sync errors. Then disk6 shows red ball and stop parity sync. I rebooted and now disk6 shows unformatted. I think this is where I made a mistake thinking that since disk6 might be bad and swapping it for a new 3tb drive. The rebuild completed but disk6 still shows unformatted. I followed the instructions here http://lime-technology.com/forum/index.php?topic=25006.0 and ran reiserfsck --rebuild-tree /dev/md6. It completed but now I can not access shares that are on disk6. Any idea of what I should do next? syslog attached, is it saying that there is problem with disk2? syslog.txt

running the reiserfsck then having it fix the problem done the trick. Thanks a lot for the help.

syslog attached. let me know if i did it wrong. sys.txt